+39 (030) 2650161
info@bentivoglio1919.it
BORING PAMA SPEEDRAM 4
PAMA
07883
FLOOR TYPE HYDROSTATIC
CNC SIEMENS SINUMERIC 840C
Axis X stroke mm 10.000
Axis Y stroke mm 5.000
Axis Z stroke mm 1.000
Axis W storke mm...
07883
FLOOR TYPE HYDROSTATIC
CNC SIEMENS SINUMERIC 840C
Axis X stroke mm 10.000
Axis Y stroke mm 5.000
Axis Z stroke mm 1.000
Axis W storke mm...
MILLING GANTRY/PORTAL PIETRO CARNAGHI MOD. UNIMILL 35 CA
PIETRO CARNAGHI
09396
CNC SIEMENS
TECHNICAL DETAILS:
Distance between frames mm 3500
Maximum height between table top and spindle nose mm 1850
Working table dimensions mm...
09396
CNC SIEMENS
TECHNICAL DETAILS:
Distance between frames mm 3500
Maximum height between table top and spindle nose mm 1850
Working table dimensions mm...
LATHE CNC CAMU MM 10.000
CAMU - AEPI
09377
CNC FAGOR 8055
DOUBLE RAM
Turning Left Ram
ISO 50 right Ram
C-AXIS
Turning diameter mm from 3000 to 10.000
Turning height mm 5000
Cross stroke mm...
09377
CNC FAGOR 8055
DOUBLE RAM
Turning Left Ram
ISO 50 right Ram
C-AXIS
Turning diameter mm from 3000 to 10.000
Turning height mm 5000
Cross stroke mm...
LATHE FAT TUR 1350 MN x 8000
FAT
08638
FLAT BED AUTOMATIC
CAPACITY
Distance between centre mm 8000
Swing over bed mm 1550
Swing over carriage mm 1300
Max. load between centre kg 20.000...
08638
FLAT BED AUTOMATIC
CAPACITY
Distance between centre mm 8000
Swing over bed mm 1550
Swing over carriage mm 1300
Max. load between centre kg 20.000...
.jpeg)
MILLING PORTAL/GANTRY COBURG
WALDRICH COBURG
09391
MULTITECH 3500 FT
PORTAL WITH MOVABLE CROSSRAIL
-Numeric Control Siemens Sinumerik 840 D
-Tables (No.2):
Width mm 3000
Lenght front table mm...
09391
MULTITECH 3500 FT
PORTAL WITH MOVABLE CROSSRAIL
-Numeric Control Siemens Sinumerik 840 D
-Tables (No.2):
Width mm 3000
Lenght front table mm...
CENTER HELLER MOD. MCH 450 C
HELLER
09192
DOUBLE PALLET, 5 AXIS
CNC SIEMENS 840D
WORK AREA:
Longitudinal stroke X axis mm 1600
Vertcal stroke Y axis mm 1200
Transverse stroke axis Z mm...
09192
DOUBLE PALLET, 5 AXIS
CNC SIEMENS 840D
WORK AREA:
Longitudinal stroke X axis mm 1600
Vertcal stroke Y axis mm 1200
Transverse stroke axis Z mm...
MILLING JOBS MOD. THOR 100
JOBS
09418
CNC Heidenhain TNC530 HSCI with handwheel HR 410
X-axis stroke mm 4000
Y-axis stroke mm 2500
Z axis stroke mm 1500
X,Y,Z axis max speed m/min...
09418
CNC Heidenhain TNC530 HSCI with handwheel HR 410
X-axis stroke mm 4000
Y-axis stroke mm 2500
Z axis stroke mm 1500
X,Y,Z axis max speed m/min...
LATHE VICTOR MOD. VT-45/325YC
VICTOR
09026
WITH LIVE TOOLS AND Y AXIS
TECHNICAL DETAILS:
Axis:
Distance between centre 3425 mm
Max swing diameter 780 mm
Max turning diameter 600 mm
Axis X...
09026
WITH LIVE TOOLS AND Y AXIS
TECHNICAL DETAILS:
Axis:
Distance between centre 3425 mm
Max swing diameter 780 mm
Max turning diameter 600 mm
Axis X...
LATHE VICTOR MOD. V1000C
VICTOR
09025
VERTICAL WITH LIVE TOOLS
Strokes:
Max swing diameter 1100 mm
Max turning height 825 mm
Max turning diameter 1000 mm
Axis X 500+40 mm
Axis Z 850...
09025
VERTICAL WITH LIVE TOOLS
Strokes:
Max swing diameter 1100 mm
Max turning height 825 mm
Max turning diameter 1000 mm
Axis X 500+40 mm
Axis Z 850...
MILLING MAUT MOD. PM3
MAUT
09200
CNC HEIDENHAIN TNC 530
AXIS STROKES:
Longitudinal stroke X axis 7000 mm
Vertical travel Z axis 1500 mm
Cross travel Y axis 3600 mm
WORK...
09200
CNC HEIDENHAIN TNC 530
AXIS STROKES:
Longitudinal stroke X axis 7000 mm
Vertical travel Z axis 1500 mm
Cross travel Y axis 3600 mm
WORK...
.jpeg)
MILLING GANTRY/PORTAL PIETRO CARNAGHI MOD. UNIMILL 35 CA
PIETRO CARNAGHI
09397
CNC SIEMENS
TECHNICAL DETAILS:
Distance between frames mm 3500
Maximum height between table top and spindle nose mm 1850
Working table dimensions mm...
09397
CNC SIEMENS
TECHNICAL DETAILS:
Distance between frames mm 3500
Maximum height between table top and spindle nose mm 1850
Working table dimensions mm...
VERTICAL LATHE RADAR MOD- RAL-20M
RADAL
09902
C AXIS and LIVE TOOLS
CNC FANUC Oi-TD
CAPACITY:
Table diameter mm 2000
Max swing diameter mm 2500
Max turning diameter mm 2400
Distance from RAM to...
09902
C AXIS and LIVE TOOLS
CNC FANUC Oi-TD
CAPACITY:
Table diameter mm 2000
Max swing diameter mm 2500
Max turning diameter mm 2400
Distance from RAM to...
.jpeg)
LATHE SAMU-TITAN RST 32 CNC
SAMU-TITAN
09411
VERTICAL
CNC SIMENS SINUMERIK
Max turning diameter mm 3300
Table diameter mm 3000
Max load capacity Kg 18000
Max working height mm 2170
Ram stroke...
09411
VERTICAL
CNC SIMENS SINUMERIK
Max turning diameter mm 3300
Table diameter mm 3000
Max load capacity Kg 18000
Max working height mm 2170
Ram stroke...
BORING TOS VARNDOSRF MOD. WRD 130Q
TOS VARNSDORF
09194
FLOOR TYPE
HYDROSTATIC
CNC ECS 2700D
Spindle diameter mm 130
Spindle taper ISO 50
Spindle speed rpm 10-2500 (3000 in S6)
Spindle motor power kW...
09194
FLOOR TYPE
HYDROSTATIC
CNC ECS 2700D
Spindle diameter mm 130
Spindle taper ISO 50
Spindle speed rpm 10-2500 (3000 in S6)
Spindle motor power kW...
LATHE POREBA MOD. TCG 200 mm 17000
POREBA
06289
height of centre mm 1000
Max turning diameter over bed mm 2000
Max turning diameter over toolholder carriage mm 1680
Turning lenght mm 17.000
Max...
06289
height of centre mm 1000
Max turning diameter over bed mm 2000
Max turning diameter over toolholder carriage mm 1680
Turning lenght mm 17.000
Max...
BORING/MILLING TIGER TMT 5RT
TIGER
09724
TMT 5 RT 3000
ROTARY TABLE
CNC SELCA 4045PD
TABLE
Table 1500x2000 mm
N.7 T-slots 22 mm
Distance between T-slots 160 mm
Maximum weight allowed on the...
09724
TMT 5 RT 3000
ROTARY TABLE
CNC SELCA 4045PD
TABLE
Table 1500x2000 mm
N.7 T-slots 22 mm
Distance between T-slots 160 mm
Maximum weight allowed on the...
.JPG)
GRINDING FAVRETTO MOD. ME 600
FAVRETTO
08239
WORKING CAPACITY:
Max length 6000 mm
Max width 1100 mm
Max height 700 mm
WHEEL HOLDER HEAD:
Power HP/kW 40/30
Grinding wheel dimensions...
08239
WORKING CAPACITY:
Max length 6000 mm
Max width 1100 mm
Max height 700 mm
WHEEL HOLDER HEAD:
Power HP/kW 40/30
Grinding wheel dimensions...
PRESS GIGANT G2-800/2 EXPORT
GIGANT
09022
Total press power 800 + 350 tons
Pistons: n.2 tons 800
Return power ton 100
Mobile table stroke or piston 1000 mm
Max pressure Bar 250
Pump l/mn...
09022
Total press power 800 + 350 tons
Pistons: n.2 tons 800
Return power ton 100
Mobile table stroke or piston 1000 mm
Max pressure Bar 250
Pump l/mn...
MILLING MANDELLI
MANDELLI
09536
1001 M 14 / U 2500/41KW - 4000
CNC Siemens 840 C
X stroke mm 4000 - longitudinal
Y stroke mm 2500 - vertical
Z stroke mm 2200 - cross
Max workpiece...
09536
1001 M 14 / U 2500/41KW - 4000
CNC Siemens 840 C
X stroke mm 4000 - longitudinal
Y stroke mm 2500 - vertical
Z stroke mm 2200 - cross
Max workpiece...
.jpeg)
T-TYPE BORING COLGAR
COLGAR
08787
MOD. PROGRAM 213 TR 12
CNC SIEMENS 840D Powerline
TECHNICAL DATA
WORK AREA:
X axis - longitudinal stroke of the table 3,500 mm
Y axis - Vertical...
08787
MOD. PROGRAM 213 TR 12
CNC SIEMENS 840D Powerline
TECHNICAL DATA
WORK AREA:
X axis - longitudinal stroke of the table 3,500 mm
Y axis - Vertical...
LATHE CNC CSF TRA 550x8000
CSF
09723
CNC FAGOR 8055i TC PLUS
Center height mm 550
Distance between centers mm 8000
Turning diameter on bed mm 1100
Turning diameter on carriage mm...
09723
CNC FAGOR 8055i TC PLUS
Center height mm 550
Distance between centers mm 8000
Turning diameter on bed mm 1100
Turning diameter on carriage mm...
CENTER TOYODA MOD. FH 800 SX
TOYODA
08839
CNC FANUC 31i
WORKING AREA:
Axis X stroke mm 1250
Axis Y stroke mm 1100
Axis Z stroke mm 1050
Distance from spindle nose to table center mm...
08839
CNC FANUC 31i
WORKING AREA:
Axis X stroke mm 1250
Axis Y stroke mm 1100
Axis Z stroke mm 1050
Distance from spindle nose to table center mm...
MILLING FAGIMA MOD. KS3000
FAGIMA
08194
CNC FANUC series 31
Axis X mm 3000
Axis Y mm 1250
Axis Z mm 2000
Rapid feedrates X,Y,Z mm/min 30.000
Spindle speed rpm 30-5000
Spindle power S1/S6 kW...
08194
CNC FANUC series 31
Axis X mm 3000
Axis Y mm 1250
Axis Z mm 2000
Rapid feedrates X,Y,Z mm/min 30.000
Spindle speed rpm 30-5000
Spindle power S1/S6 kW...
LATHE CNC COMEV TITANO 65 EVO
COMEV
09607
CNC D-Electron Z32
Center height 650 mm
Swing diameter on the bed mm 1300
Swing diameter on the cross slide 1320 mm
Distance between centers 8000...
09607
CNC D-Electron Z32
Center height 650 mm
Swing diameter on the bed mm 1300
Swing diameter on the cross slide 1320 mm
Distance between centers 8000...
MILLING MECOF MOD. CS 1040
MECOF
09531
FLOOR TYPE
CNC D-ELECTRON Z32
Table dimensions mm 10.000x1060
T-slots mm 22H7
T-slots distance mm 175
Longitudinal stroke axis X mm 8300
Vertical...
09531
FLOOR TYPE
CNC D-ELECTRON Z32
Table dimensions mm 10.000x1060
T-slots mm 22H7
T-slots distance mm 175
Longitudinal stroke axis X mm 8300
Vertical...
LATHE NILES MOD. N50 UC
NILES
09529
MULTITASKING
Siemens 840 CNC retrofit in 2018
Diameter on the bench 940 mm
Turning diameter over the entire length 900 mm
Distance between centers...
09529
MULTITASKING
Siemens 840 CNC retrofit in 2018
Diameter on the bench 940 mm
Turning diameter over the entire length 900 mm
Distance between centers...
MILLING MANDELLI
MANDELLI
09535
REGENT 1001 M 14 / U 4000
Siemens 840 C CNC
X stroke 4000 mm - longitudinal
Y stroke 2500 mm - vertical
Z stroke 2200 mm - cross
Table 1600 x 2000...
09535
REGENT 1001 M 14 / U 4000
Siemens 840 C CNC
X stroke 4000 mm - longitudinal
Y stroke 2500 mm - vertical
Z stroke 2200 mm - cross
Table 1600 x 2000...
MILLING PORTAL/GANTRY FPT DINO
FPT
09899
CNC HEIDENHAIN 530
Table dimensions mm 3000x1200
Table capacity kg 6000
Longitudinal X-axis stroke mm 2800
Cross Y-axis stroke mm 1600
Vertical...
09899
CNC HEIDENHAIN 530
Table dimensions mm 3000x1200
Table capacity kg 6000
Longitudinal X-axis stroke mm 2800
Cross Y-axis stroke mm 1600
Vertical...
.jpeg)
TABLE TYPE MILLING STS AVANGARDE
STS
09263
CNC SELCA S4040D
AXIS X mm 2.500
AXIS Y mm 1.700
AXIS Z mm 1.500 vertical
FEEDRATE AXIS X, Y, Z, 40 m/min
ROTARY TABLE
Dimensions mm 1.600 x...
09263
CNC SELCA S4040D
AXIS X mm 2.500
AXIS Y mm 1.700
AXIS Z mm 1.500 vertical
FEEDRATE AXIS X, Y, Z, 40 m/min
ROTARY TABLE
Dimensions mm 1.600 x...
LATHE TITAN MOD. D33 CNC
TITAN
05993
CNC ECS 2400
N°02 vertical carriage
Platform diameter mm.3000
Max working diameter mm.3160
Min diameter internal working mm.400
Max height working...
05993
CNC ECS 2400
N°02 vertical carriage
Platform diameter mm.3000
Max working diameter mm.3160
Min diameter internal working mm.400
Max height working...
LATHE ARIS MOD. SGN 1400
ARIS
09901
4 GUIDES
CNC FAGOR 8055
Turning diameter under head mm 2200
Turning diameter on carriage mm 1800
Distance between centers mm 12,000
Capacity ton...
09901
4 GUIDES
CNC FAGOR 8055
Turning diameter under head mm 2200
Turning diameter on carriage mm 1800
Distance between centers mm 12,000
Capacity ton...
.jpeg)
TABLE UMARO MDR 3030/40/4500
UMARO
05791
MAX WEIGHT ON CENTER TABLE TON.40
TABLE DIMENSIONS MM.3000x3000
LONGITUDINAL STROKE (AXIS V) MM.4350
RAPID FEED SPEED IN CONTINUOS (AXIS V) MM/MIN...
05791
MAX WEIGHT ON CENTER TABLE TON.40
TABLE DIMENSIONS MM.3000x3000
LONGITUDINAL STROKE (AXIS V) MM.4350
RAPID FEED SPEED IN CONTINUOS (AXIS V) MM/MIN...
.jpeg)
CENTER QUASER MOD. HX850A/HT
QUASER
09399
CNC FANUC 18i-MB
CAPACITY:
Pallet dimensions mm800x800
Max swing diameter mm 1200
Max work piece height mm 1100
Table load kg 1500
Axis X stroke mm...
09399
CNC FANUC 18i-MB
CAPACITY:
Pallet dimensions mm800x800
Max swing diameter mm 1200
Max work piece height mm 1100
Table load kg 1500
Axis X stroke mm...
FILAMENT WINDING BOHELZ SHAFER
09608
MACHINENBAU EHA
Roll-up length mm 7800
Roll-up diameter mm 1400
COMPLETE WITH:
-Trolley for roller handling
-Oven with adjustable curing...
MACHINENBAU EHA
Roll-up length mm 7800
Roll-up diameter mm 1400
COMPLETE WITH:
-Trolley for roller handling
-Oven with adjustable curing...
FLOOR TYPE MILLING SORALUCE SP 8000
SORALUCE
09262
CNC SELCA S3045
STROKES:
Longitudinal stroke X axis 6500 mm
Vertical stroke Y axis 2000 mm
Z axis ram stroke 1200 mm
TABLE:
Table length 8000...
09262
CNC SELCA S3045
STROKES:
Longitudinal stroke X axis 6500 mm
Vertical stroke Y axis 2000 mm
Z axis ram stroke 1200 mm
TABLE:
Table length 8000...
CENTER OKK HM630
OKK
09302
CNC FANUC 310is-Model A
ROTOPALLET
LINEAR AXES
Axis X stroke mm 1050
Axis Y stroke mm 900
Axis X stroke mm 900
Rapid feed rates XYZ m/min 54...
09302
CNC FANUC 310is-Model A
ROTOPALLET
LINEAR AXES
Axis X stroke mm 1050
Axis Y stroke mm 900
Axis X stroke mm 900
Rapid feed rates XYZ m/min 54...
BENDING ROLL 4 ROLLS LVD 3050x60
LVD
09376
HYDRAULIC
Working lenght mm 3050
Thickness mm 60
Diameter superior roll mm 660
Diameter inferioror roll mm 660
Diameter lateral rolls mm 525
Lower...
09376
HYDRAULIC
Working lenght mm 3050
Thickness mm 60
Diameter superior roll mm 660
Diameter inferioror roll mm 660
Diameter lateral rolls mm 525
Lower...
BORING PEGARD PRECIRAM 2
PEGARD
08898
CNC SIEMENS 840D
Quill diameter mm 160
Quill taper ISO 50
Quill stroke 700 mm
Spindle motor power kW 70
Rotation speed rpm 1600
RAM stroke mm...
08898
CNC SIEMENS 840D
Quill diameter mm 160
Quill taper ISO 50
Quill stroke 700 mm
Spindle motor power kW 70
Rotation speed rpm 1600
RAM stroke mm...
BORING SAN ROCCO 110 FMC 110/S-MMZ
SAN ROCCO
07749
CNC ECS 4801
Table 1300 x 1100 mm
Axis X 3135 mm
Axis Y 2010 mm
Axis Z 1780 + 650 mm at the table center
Axis W (spindle stroke) 600 mm
Axis B...
07749
CNC ECS 4801
Table 1300 x 1100 mm
Axis X 3135 mm
Axis Y 2010 mm
Axis Z 1780 + 650 mm at the table center
Axis W (spindle stroke) 600 mm
Axis B...
.jpeg)
BORING TOS VARNSDORF
TOS VARNSDORF
08747
MOD. WHN 13 CNC
CNC HEIDENHAIN TNC 426
STROKES:
-Axis X stroke mm 3500
-Axis Y stroke mm 2000
-Axis Z stroke mm 1250
-Axis W stroke mm...
08747
MOD. WHN 13 CNC
CNC HEIDENHAIN TNC 426
STROKES:
-Axis X stroke mm 3500
-Axis Y stroke mm 2000
-Axis Z stroke mm 1250
-Axis W stroke mm...
GRINDING GIORIA RU/S 4000 CNC
GIORIA
07432
CNC Siemens sinumerik 820T
Max swing diameter mm 595
Max grinding diameter 590 mm
Max grinding length 4000 mm
Max weight admitted between centers Kg...
07432
CNC Siemens sinumerik 820T
Max swing diameter mm 595
Max grinding diameter 590 mm
Max grinding length 4000 mm
Max weight admitted between centers Kg...
MILLING IM PARPAS ML90/6000
PARPAS
08889
Numeric Control DELECTRON AZ102
Longitudinal travel mm 6000
Vertical travel mm 2000
Cross travel mm 1000
Spindle motor Brushless kW 22
Max torque Nm...
08889
Numeric Control DELECTRON AZ102
Longitudinal travel mm 6000
Vertical travel mm 2000
Cross travel mm 1000
Spindle motor Brushless kW 22
Max torque Nm...
SCREW MILLING MACHINE SAPORITI
SAPORITI
07393
MOD. L 560 E S DOPPIA A CNC
WITH DOUBLE HEAD (FOR HIGH PRODUCTION OF SCREW)
7 AXIS
CNC AUTOMATA
Center height mm 510
Center distance mm 5200
Max...
07393
MOD. L 560 E S DOPPIA A CNC
WITH DOUBLE HEAD (FOR HIGH PRODUCTION OF SCREW)
7 AXIS
CNC AUTOMATA
Center height mm 510
Center distance mm 5200
Max...
T-TYPE BORING TOS VARNSDORF
TOS VARNSDORF
09189
MOD. WHN 110 MC
PALLET CHANGE
CNC ECS 2700 D
Longitudinal X axis stroke 2000 mm
Vertical Y axis stroke 1400 mm
W axis stroke 1250 mm
Quill Z axis...
09189
MOD. WHN 110 MC
PALLET CHANGE
CNC ECS 2700 D
Longitudinal X axis stroke 2000 mm
Vertical Y axis stroke 1400 mm
W axis stroke 1250 mm
Quill Z axis...
VERTICAL LATHE O-MMOD. VT5-20N
O-M
07829
CNC FANUC 18-T
Diameter plateau 4 jaws mm 2000
Max Swing diameter mm 2500
Max turning diameter mm 2300
Max height crossrail-table mm 2050
Max...
07829
CNC FANUC 18-T
Diameter plateau 4 jaws mm 2000
Max Swing diameter mm 2500
Max turning diameter mm 2300
Max height crossrail-table mm 2050
Max...
GRINDING SURFACE CHEVALIER FSG 2048
CHEVALIER
09309
MOBILE COLUMN
Control Isurface with display touchscreen 10.4''
WORKING CAPACITY:
-Max grinding lenght 1200 mm
-Max grinding width 500 mm
-Max...
09309
MOBILE COLUMN
Control Isurface with display touchscreen 10.4''
WORKING CAPACITY:
-Max grinding lenght 1200 mm
-Max grinding width 500 mm
-Max...
CENTER MAKINO A77
MAKINO
08962
CNC FANUC
GENERAL DATA:
X-axis stroke mm 800
Y-axis stroke mm 750
Distance table top - spindle axis mm 100-850
Z-axis stroke mm 770
Cross distance...
08962
CNC FANUC
GENERAL DATA:
X-axis stroke mm 800
Y-axis stroke mm 750
Distance table top - spindle axis mm 100-850
Z-axis stroke mm 770
Cross distance...
LATHE KRAMATORSK 900x12.500
KRAMATORSK
New05081
MOD. IA600
MAX DIAMETER ON THE BED MM.1800
MAX DIAMETER OVER CARRIAGE MM.1400
LENGHT BETWEEN CENTRES MM.12500
LENGHT OVER BED MM.14300
WIDTH WORKING...
New05081
MOD. IA600
MAX DIAMETER ON THE BED MM.1800
MAX DIAMETER OVER CARRIAGE MM.1400
LENGHT BETWEEN CENTRES MM.12500
LENGHT OVER BED MM.14300
WIDTH WORKING...
LATHE SAFOP LEONARD 45
SAFOP
09532
4 GUIDEWAYS
LIVE TOOLS
AXIS C
CNC Siemens Sinumerik
Height center 450 mm
Distance between centers 8.000 mm
Live tools
Bar passaging 120 mm
Plateau...
09532
4 GUIDEWAYS
LIVE TOOLS
AXIS C
CNC Siemens Sinumerik
Height center 450 mm
Distance between centers 8.000 mm
Live tools
Bar passaging 120 mm
Plateau...
.jpeg)
MILLING FPT MOD. RAID XL
FPT
09205
WITH FIXED PORTAL
CNC Heidenhain TNC530I S.P.
WORKING AREA:
Longitudinal travel X mm 2000
Cross travel Y mm 1400
Vertical travel Z mm 800
Table...
09205
WITH FIXED PORTAL
CNC Heidenhain TNC530I S.P.
WORKING AREA:
Longitudinal travel X mm 2000
Cross travel Y mm 1400
Vertical travel Z mm 800
Table...
.jpeg)
MILLING LAGUN MOD. GBM 26
LAGUN
09525
CNC SELCA S4045D
TABLE:
Table dimensions mm 2600x800
N. and width T-slots mm 5-22
Distance between T-slots mm 140
Weight on the table Kg...
09525
CNC SELCA S4045D
TABLE:
Table dimensions mm 2600x800
N. and width T-slots mm 5-22
Distance between T-slots mm 140
Weight on the table Kg...
MILLING NOVAR PROTEA 5000
NOVAR
08785
CNC SELCA 3045
TABLE:
Table dimensions mm 5000x1000
T-slots number 7
T-slots width mm 22
T-slots distance mm 150
Table load Kg 10.000
AXIS...
08785
CNC SELCA 3045
TABLE:
Table dimensions mm 5000x1000
T-slots number 7
T-slots width mm 22
T-slots distance mm 150
Table load Kg 10.000
AXIS...
MILLING SACHMAN MOD. T22
SACHMAN
09664
BED TYPE
CNC SELCA 3045
STROKES:
X axis longitudinal stroke 2500 mm
Y axis transversal stroke 1400 mm
Z axis vertical stroke 1200...
09664
BED TYPE
CNC SELCA 3045
STROKES:
X axis longitudinal stroke 2500 mm
Y axis transversal stroke 1400 mm
Z axis vertical stroke 1200...
MILLUTENSIL PRESS MIL 203
MILLUTENSIL
09666
Closing force kN 1500
Opening force kN 350
Tables surface mm 2000x1500
Max load on the lower table Kg 30,000
Max load on the upper table Kg...
09666
Closing force kN 1500
Opening force kN 350
Tables surface mm 2000x1500
Max load on the lower table Kg 30,000
Max load on the upper table Kg...
VERTICAL MACHINING CENTRE EUMACH MOD. HSM 1000 L / 10.000RPM
EUMACH
08223
CNC Fanuc 0i-MF
TECHNICAL DETAILS
- x axis 1020 mm
- y axis 610 mm
- z axis 610 mm
- Distance spindle nose to table surface 77-687 mm
- Distance...
08223
CNC Fanuc 0i-MF
TECHNICAL DETAILS
- x axis 1020 mm
- y axis 610 mm
- z axis 610 mm
- Distance spindle nose to table surface 77-687 mm
- Distance...
MILLING TOS KURIM FSQ 100
TOS KURIM
09198
MOD. FSQ 100 OR/A3
CNC HEIDENHAIN TNC 426 M
Table surface 3000x1000 mm
Max workpiece weight Kg 7000
Number of T-slots mm 7x140
Central T-slot width...
09198
MOD. FSQ 100 OR/A3
CNC HEIDENHAIN TNC 426 M
Table surface 3000x1000 mm
Max workpiece weight Kg 7000
Number of T-slots mm 7x140
Central T-slot width...
N.2 VERTICAL LATHE EMAG VSC 400 B
EMAG
09404
CNC SIEMENS 840 C
Max turning diameter mm 420
Max turning height mm 315
Axis X stroke mm 835
Axis Z stroke mm 315
Spindle speed rpm 4000
Spindle...
09404
CNC SIEMENS 840 C
Max turning diameter mm 420
Max turning height mm 315
Axis X stroke mm 835
Axis Z stroke mm 315
Spindle speed rpm 4000
Spindle...
.JPG)
DEEP HOLE DRILLING MACHINE HETO
HETO
09462
2000 POWER
CNC FAGOR 8055 + handwheel Selbox
STROKES:
Axis X stroke mm 2000
Axis Y stroke mm 1200
Axis Z stroke mm 850
Axis W stroke mm...
09462
2000 POWER
CNC FAGOR 8055 + handwheel Selbox
STROKES:
Axis X stroke mm 2000
Axis Y stroke mm 1200
Axis Z stroke mm 850
Axis W stroke mm...
HORIZONTAL CENTER
LINEA
09193
LINEA SPAZIO 20 METRO
7 PALLET
CNC GE FANUC serie 16-M
STROKES_
Axis X stroke mm 1150
Axis Y stroke mm 850
Axis Z stroke mm 910
SPINDLE:
Spindle...
09193
LINEA SPAZIO 20 METRO
7 PALLET
CNC GE FANUC serie 16-M
STROKES_
Axis X stroke mm 1150
Axis Y stroke mm 850
Axis Z stroke mm 910
SPINDLE:
Spindle...
.JPG)
LATHE IMT MOD. S32 TM2
IMT
08629
CNC FANUC 18iT
AXIS C
LIVE TOOLS
ROTOPALLET
CAPACITY:
Max swing diameter 800 mm
Max turning diameter 650 mm
LATHE SPINDLE:
Max spindle speed 1800...
08629
CNC FANUC 18iT
AXIS C
LIVE TOOLS
ROTOPALLET
CAPACITY:
Max swing diameter 800 mm
Max turning diameter 650 mm
LATHE SPINDLE:
Max spindle speed 1800...
MILLING COLGAR MOD. PROGRAM
COLGAR
08249
CONTROLLO NUMERICO ECS 4801
Axis X longitudinal mm 8000
Axis Y vertical mm 2000
Axis Z cross mm 1000
Spindle speed max rpm 1200
Total installed...
08249
CONTROLLO NUMERICO ECS 4801
Axis X longitudinal mm 8000
Axis Y vertical mm 2000
Axis Z cross mm 1000
Spindle speed max rpm 1200
Total installed...
LATHE SHENYANG SMTCL HTC80200
SHENYANG
08840
CNC FANUC Oi-TC + remote handwheel
Max swing diameter over bed mm 1000
Max turning length 2000 mm
Max turning diameter 800 mm
Max swing diameter over...
08840
CNC FANUC Oi-TC + remote handwheel
Max swing diameter over bed mm 1000
Max turning length 2000 mm
Max turning diameter 800 mm
Max swing diameter over...
VERTICAL LATHE VTL ACME
ACME
09887
CNC ECS Touch Screen
Table size mm 2000
Max turning diameter mm 2300
Height mm 1600
Jaws hydraulic chuck
Ram travel mm 1250 with C axis
ATC 12...
09887
CNC ECS Touch Screen
Table size mm 2000
Max turning diameter mm 2300
Height mm 1600
Jaws hydraulic chuck
Ram travel mm 1250 with C axis
ATC 12...
CENTER MIKRON UCP 800 DURO
MIKRON
09643
CNC Heidenhain iTNC 530
STROKES
X axis 800 mm
Y axis 650 mm
Z axis 500 mm
TILTING ROTARY TABLE:
Dimensions mm 600x600
Max piece weight 500 kg
Axis...
09643
CNC Heidenhain iTNC 530
STROKES
X axis 800 mm
Y axis 650 mm
Z axis 500 mm
TILTING ROTARY TABLE:
Dimensions mm 600x600
Max piece weight 500 kg
Axis...
.JPG)
CENTER DAEWOO ACE MOD.HM800
DAEWOO
08534
CNC FANUC 18i-M
STROKES:
Axis X mm 1250
Axis Y mm 1000
Axis Z mm 1000
PALLET:
Pallet number 2
Pallet dimensions mm 800x800
Max pallet load Kg...
08534
CNC FANUC 18i-M
STROKES:
Axis X mm 1250
Axis Y mm 1000
Axis Z mm 1000
PALLET:
Pallet number 2
Pallet dimensions mm 800x800
Max pallet load Kg...
CENTER FAMUP MMV 200-80
FAMUP
09648
MOVING COLUMN
CNC SELCA 4040 DH
STROKES:
X axis 2000 mm
Y axis 800 mm
Z axis 700 mm
TABLE:
Table size 2400x800
T-slots 7
T-slots width mm...
09648
MOVING COLUMN
CNC SELCA 4040 DH
STROKES:
X axis 2000 mm
Y axis 800 mm
Z axis 700 mm
TABLE:
Table size 2400x800
T-slots 7
T-slots width mm...
DEEP HOLE DRILLING IMSA MOD. MF 1500 B2
IMSA
08412
CNC SELCA 3045 + remote handwheel
ROTARY TABLE
Working surface mm 1200x1500
T-slots (quantity x width ) mm 6 x 22
Max allowable load in rotation Kg...
08412
CNC SELCA 3045 + remote handwheel
ROTARY TABLE
Working surface mm 1200x1500
T-slots (quantity x width ) mm 6 x 22
Max allowable load in rotation Kg...
LASER TRUMPF TCL 3050
TRUMPF
08168
Laser power 6000 W CO/2
Working size mm 3000x1500
Maximum material thicknesses:
-Construction steel (oxygen) 25 mm
-Construction steel (high pressure...
08168
Laser power 6000 W CO/2
Working size mm 3000x1500
Maximum material thicknesses:
-Construction steel (oxygen) 25 mm
-Construction steel (high pressure...
LATHE MAZAK INTEGREX 300II SY
MAZAK
09379
AXIS Y
SPINDLE/SUB-SPINDLE
LIVE TOOLS
CNC Mazatrol Fusion 640 MT
CAPACITY:
Max swing diameter mm 610
Max working diameter mm 610
Max working length...
09379
AXIS Y
SPINDLE/SUB-SPINDLE
LIVE TOOLS
CNC Mazatrol Fusion 640 MT
CAPACITY:
Max swing diameter mm 610
Max working diameter mm 610
Max working length...
LATHE UTITA MOD. T 500/CN
UTITA
05949
CNC FAS Z16
Turning diameter mm.800 over bed, mm.550x6200 over carriage
Lenght mm.6200
Height of center mm.450
Bar passaging mm.80
Spindle taper ASA...
05949
CNC FAS Z16
Turning diameter mm.800 over bed, mm.550x6200 over carriage
Lenght mm.6200
Height of center mm.450
Bar passaging mm.80
Spindle taper ASA...
.JPG)
LATHE MORI SEIKI NL2500SY/700
MORI SEIKI
09398
AXIS Y
COUNTER-SPINDLE
LIVE TOOLS
C-AXIS 0.001°
CNC MORI SEIKI MSX-850 III
CAPACITY:
Swing diameter over bed mm 923,8
Swing diameter over cross...
09398
AXIS Y
COUNTER-SPINDLE
LIVE TOOLS
C-AXIS 0.001°
CNC MORI SEIKI MSX-850 III
CAPACITY:
Swing diameter over bed mm 923,8
Swing diameter over cross...
LATHE VIPER VT-2800YM-2500
VIPER
09280
CNC HORIZONTAL AXIS
AXIS Y
LIVE TOOLS
CNC FANUC 21i-TB
WORKING AREA:
Max swing diameter on the bed mm 600
Max turning diameter 390 mm
Max swing...
09280
CNC HORIZONTAL AXIS
AXIS Y
LIVE TOOLS
CNC FANUC 21i-TB
WORKING AREA:
Max swing diameter on the bed mm 600
Max turning diameter 390 mm
Max swing...
DEEP HOLE DRILLING IMSA MOD. MF 800 C
IMSA
07366
CNC SELCA S4040D
ROTARY TABLE:
Working surface diam. mm 600
T-slots (quantityxwidth) mm 4x18
Max load Kg 2000
AXIS STROKES - WORKING...
07366
CNC SELCA S4040D
ROTARY TABLE:
Working surface diam. mm 600
T-slots (quantityxwidth) mm 4x18
Max load Kg 2000
AXIS STROKES - WORKING...
LATHE VIPER MOD. VT-36 BLMC
VIPER
09281
CNC HORIZONTAL AXIS
LIVE TOOLS
TAILSTOCK
CNC FANUC 0iTD
WORKING AREA:
Max swing diameter on the bed mm 780
Max swing diameter on cross guides 610...
09281
CNC HORIZONTAL AXIS
LIVE TOOLS
TAILSTOCK
CNC FANUC 0iTD
WORKING AREA:
Max swing diameter on the bed mm 780
Max swing diameter on cross guides 610...
LATHE GOODWAY MOD. GS-280 YS
GOODWAY
09741
CNC FANUC 18i-TB
Max turning length 500 mm
Max turning diameter 400 mm
Bar passage 75 mm
X axis 198.1 mm
Y axis 569 mm
12 position turret
Spindle...
09741
CNC FANUC 18i-TB
Max turning length 500 mm
Max turning diameter 400 mm
Bar passage 75 mm
X axis 198.1 mm
Y axis 569 mm
12 position turret
Spindle...
PRESS OMERA 250 T
OMERA
07581
MECHANICAL DOUBLE COLUMN
OPM2-250
Power 250 T
Working table mm 2200x1200
Strokes/min n. 24
Max stroke mm 300
Adjustable stroke mm 150
Distance...
07581
MECHANICAL DOUBLE COLUMN
OPM2-250
Power 250 T
Working table mm 2200x1200
Strokes/min n. 24
Max stroke mm 300
Adjustable stroke mm 150
Distance...
CENTER MAS MOD. MCV 1270 POWER
MAS
08877
CNC HEIDENHAIN iTNC 530
TABLE:
Table surface mm 1500x670
T-slots (numberxwidthxspacing) mm 5x18x125
Max table weight Kg 1200
Table height above the...
08877
CNC HEIDENHAIN iTNC 530
TABLE:
Table surface mm 1500x670
T-slots (numberxwidthxspacing) mm 5x18x125
Max table weight Kg 1200
Table height above the...
CENTER FAMUP EMCO
FAMUP EMCO
07790
MOD. MAXMILL 500
5 AXIS
CNC Siemens SINUMERIK 840D SL
WORKING RANGE:
Axis X stroke mm 650
Axis Y stroke mm 550
Axs Z stroke mm 500
Axis B +/- 100...
07790
MOD. MAXMILL 500
5 AXIS
CNC Siemens SINUMERIK 840D SL
WORKING RANGE:
Axis X stroke mm 650
Axis Y stroke mm 550
Axs Z stroke mm 500
Axis B +/- 100...
CENTER FAMUP MMV 120-65 LINEAR DRIVE
FAMUP
09646
LINEAR DRIVE
MOVING COLUMN
CNC SELCA 4045 PD
TABLE:
Table size mm 1.600x650
T-slots mm 5x18x125
Max load Kg 1000
TRAVEL:
Longitudinal X axis 1200...
09646
LINEAR DRIVE
MOVING COLUMN
CNC SELCA 4045 PD
TABLE:
Table size mm 1.600x650
T-slots mm 5x18x125
Max load Kg 1000
TRAVEL:
Longitudinal X axis 1200...
MILLING/DRILLING STEM
STEM
08882
DEEP DRILLING UNIT FOMAS FC2/00, max drilling depth 1500 mm
CNC SELCA 1200
X axis travel 3200 mm
Y axis travel 2100 mm
Milling ram stroke mm...
08882
DEEP DRILLING UNIT FOMAS FC2/00, max drilling depth 1500 mm
CNC SELCA 1200
X axis travel 3200 mm
Y axis travel 2100 mm
Milling ram stroke mm...
MOULDING TEST TCS 100 TON
TCS
08771
Closing force kN 1000
Opening force kN 400
Lower plane size mm 2000x1500
Lower plane translation mm 1500
Max weight on the lower plane kN 200
Upper...
08771
Closing force kN 1000
Opening force kN 400
Lower plane size mm 2000x1500
Lower plane translation mm 1500
Max weight on the lower plane kN 200
Upper...
PRESS ECCENTRIC COTELLI P200 FRL
COTELLI
New01648
C- TYPE
-table size mm.1300x750
-size sledge hammer mm.1110x660
-day light / sledge hammer mm.600
-Nr.06 Guides
-regulating stroke from mm. 0 to...
New01648
C- TYPE
-table size mm.1300x750
-size sledge hammer mm.1110x660
-day light / sledge hammer mm.600
-Nr.06 Guides
-regulating stroke from mm. 0 to...
VERTICAL LATHE MORANDO KL 14
MORANDO
07391
CNC ICEM 402
Spindle diameter mm 1450
Turning diameter mm 1680
Max turning height mm 1100
Cross stroke mm 1000
RAM stroke mm 1100
Taper ISO...
07391
CNC ICEM 402
Spindle diameter mm 1450
Turning diameter mm 1680
Max turning height mm 1100
Cross stroke mm 1000
RAM stroke mm 1100
Taper ISO...
BORING TOS MOD. WHN 13A
TOS VARNSDORF
07541
CNC ECS 2400
Axis X mm 1965
Axis Y mm 2040
Axis Z mm 1230
Axis W mm 572
Spindle diameter mm 130
Table mm 1800 x 1800
Equipped with:
- Manual Head
-...
07541
CNC ECS 2400
Axis X mm 1965
Axis Y mm 2040
Axis Z mm 1230
Axis W mm 572
Spindle diameter mm 130
Table mm 1800 x 1800
Equipped with:
- Manual Head
-...
ERODER WIRE EXCETEK EDM V3280
EXCETEK EDM
08172
WITH CNC
Max piece dimensions mm 3500x3000x350
Max piece weight Kg 10000
X/Y axis strokes mm 3000x1420+1420 (due teste)
Z axis stroke mm 350
Thread...
08172
WITH CNC
Max piece dimensions mm 3500x3000x350
Max piece weight Kg 10000
X/Y axis strokes mm 3000x1420+1420 (due teste)
Z axis stroke mm 350
Thread...
ERODER WIRE SODICK SL 400Q
SODICK
09329
Max workpiece dimensions (wxdxh):
-mm 600x470x240 (flushing)
-mm 600x470x230 (submerged)
Max workpiece weight:
-500 kg (flushing)
-350 kg...
09329
Max workpiece dimensions (wxdxh):
-mm 600x470x240 (flushing)
-mm 600x470x230 (submerged)
Max workpiece weight:
-500 kg (flushing)
-350 kg...
CENTER HURON KX 15
HURON
08960
5-AXIS PORTAL
CNC SIEMENES 840D
STROKES:
X axis stroke table 800 mm
Y axis stroke carriage mm 1000
Z axis stroke ram 550 mm
B axis travel (tilting) +...
08960
5-AXIS PORTAL
CNC SIEMENES 840D
STROKES:
X axis stroke table 800 mm
Y axis stroke carriage mm 1000
Z axis stroke ram 550 mm
B axis travel (tilting) +...
BORING SAN ROCCO FUTURA 13/32MMT
SAN ROCCO
09190
CNC ECS 2301
STROKES:
X axis (longitudinal) stroke 3000 mm
Y axis (vertical) stroke 2500 mm
Z axis (column trasversal) stroke 1500...
09190
CNC ECS 2301
STROKES:
X axis (longitudinal) stroke 3000 mm
Y axis (vertical) stroke 2500 mm
Z axis (column trasversal) stroke 1500...
CNC Automatic rotary tables TGTR:
LATHE GOODWAY MOD. GS2800M
GOODWAY
09744
AXIS C
LIVE TOOLS
CNC FANUC 18i-TB
Max swing diameter 630 mm
Max turning diameter 440 mm
Max turning length 731 mm
Bar passaging 75 mm
X axis travel...
09744
AXIS C
LIVE TOOLS
CNC FANUC 18i-TB
Max swing diameter 630 mm
Max turning diameter 440 mm
Max turning length 731 mm
Bar passaging 75 mm
X axis travel...
MILLING SACHMAN 521/FO
SACHMAN
08047
CNC Heidenhain TNC 415
TABLE
Size mm 2700x1000
Max load Kg 7500
AXIS
X axis (longitudinal) mm 2500
Y axis (vertical) mm 1200
Z axis (cross) mm...
08047
CNC Heidenhain TNC 415
TABLE
Size mm 2700x1000
Max load Kg 7500
AXIS
X axis (longitudinal) mm 2500
Y axis (vertical) mm 1200
Z axis (cross) mm...
ROTARY TABLE OERLIKON
.jpeg)
CENTER MIKRON UCP600
MIKRON
09247
5-AXIS SIMULTANEOUS
CNC HEIDENHAIN TNC 430 M
X axis travel 530 mm
Y axis travel 450 mm
Z axis travel 450 mm
Spindle speed rpm 12000
Spindle power kW...
09247
5-AXIS SIMULTANEOUS
CNC HEIDENHAIN TNC 430 M
X axis travel 530 mm
Y axis travel 450 mm
Z axis travel 450 mm
Spindle speed rpm 12000
Spindle power kW...
LATHE CNC DOOSAN PUMA 2500 Y
DOOSAN
09613
TAILSTOCK
LIVE TOOLS
Y-AXIS
CNC FANUC 18iTB
CAPACITY:
Max diameter on the bed mm 600
Max diameter on the carriage mm 550
Max turning diameter mm...
09613
TAILSTOCK
LIVE TOOLS
Y-AXIS
CNC FANUC 18iTB
CAPACITY:
Max diameter on the bed mm 600
Max diameter on the carriage mm 550
Max turning diameter mm...
BENDER PROFILES MACHINE SERTOM
SERTOM
06047
MOD. PP 180/200
LONG SHAFTS
WITH UPPER STIFFNESS GROUP AND
TELESCOPIC GROUPS FOR PROFILES BENDING
Central working roll diameter mm 610
Lateral...
06047
MOD. PP 180/200
LONG SHAFTS
WITH UPPER STIFFNESS GROUP AND
TELESCOPIC GROUPS FOR PROFILES BENDING
Central working roll diameter mm 610
Lateral...
CENTER MIKRON MOD. HPM 1350
MIKRON
09642
CNC HEIDENHAIN iTNC 530
TABLE:
Table size mm 1425x860
Max workpiece weight Kg 1000
T-slots 10
T-slots widht T 1x18H7, 9x18H12
STROKES:
X axis 1350...
09642
CNC HEIDENHAIN iTNC 530
TABLE:
Table size mm 1425x860
Max workpiece weight Kg 1000
T-slots 10
T-slots widht T 1x18H7, 9x18H12
STROKES:
X axis 1350...
CENTER OKUMA MOD. MX 40 HA
OKUMA
06973
HORIZONTAL, ROTOPALLET
CNC OSP 7000 M
Axis X mm 560
Axis Y mm 610
Axis Z mm 560
Pallet dimensions mm 400x400
Pallet load Kg 400
Min. angle indexing...
06973
HORIZONTAL, ROTOPALLET
CNC OSP 7000 M
Axis X mm 560
Axis Y mm 610
Axis Z mm 560
Pallet dimensions mm 400x400
Pallet load Kg 400
Min. angle indexing...
CNC LATHE TONGTAI TOPPER TGL20
TONGTAI
New05412
2 AXIS
CNC FANUC Oi-TC
WORKING CAPACITY:
Max swing diameter mm.450
Max turning diameter mm.370
Max workpiece weight Kg.20
Axis X mm.260+1050
Axis Z...
New05412
2 AXIS
CNC FANUC Oi-TC
WORKING CAPACITY:
Max swing diameter mm.450
Max turning diameter mm.370
Max workpiece weight Kg.20
Axis X mm.260+1050
Axis Z...
GRINDING MININI MOD. TH 10.30
MININI
New04959
- Dimensioni di lavoro mm 3100 x 1100
- Table mm.3020x605
- axis X mm.3200
- grinding height mm.1000
- grinding width mm.1000 (+ wheel width)
- wheel...
New04959
- Dimensioni di lavoro mm 3100 x 1100
- Table mm.3020x605
- axis X mm.3200
- grinding height mm.1000
- grinding width mm.1000 (+ wheel width)
- wheel...
SHARPENING SCHNEEBERGER
SCHNEEBERGER
08646
MOD. MRG GEMINI
CNC FANUC 160M
AXIS CNC:
Axis X stroke mm 360
Axis Y stroke mm 270
Axis Z stroke mm 270
AXIS X,Y,Z:
Resolution di 0,1 Mikron
AXIS...
08646
MOD. MRG GEMINI
CNC FANUC 160M
AXIS CNC:
Axis X stroke mm 360
Axis Y stroke mm 270
Axis Z stroke mm 270
AXIS X,Y,Z:
Resolution di 0,1 Mikron
AXIS...
SURFACE GRINDER MENGELE PSM 1600SR-J
MENGELE
RTF.VER.O163
ROTARY TABLE MM 16OO
VERTICAL HEAD IN SECTORS MM 6OO
TABLE TRASLATION ON AXIS X MM 15OO
VERTICAL AXIS MM 6OO
POWER KW 60
USED MACHINE
RTF.VER.O163
ROTARY TABLE MM 16OO
VERTICAL HEAD IN SECTORS MM 6OO
TABLE TRASLATION ON AXIS X MM 15OO
VERTICAL AXIS MM 6OO
POWER KW 60
USED MACHINE
MILLING BOMAC MOD. FU150ST
BOMAC
09874
TECHNICAL FEATURES:
TABLE
Dimensions 500x1000 mm
Vertical table 250x1200 mm
Table T-slots mm 14x63 No. 5
Vertical table T-slots mm 14x63 No. 3
Table...
09874
TECHNICAL FEATURES:
TABLE
Dimensions 500x1000 mm
Vertical table 250x1200 mm
Table T-slots mm 14x63 No. 5
Vertical table T-slots mm 14x63 No. 3
Table...
BORING SAN ROCCO MEC 120
SAN ROCCO
06483
CNC HEIDENHAIN 360
-Spindle bore diameter mm 120
-Spindle bore taper ISO 50
-Spindle nose milling diameter mm 203
-Spindle bore stroke mm...
06483
CNC HEIDENHAIN 360
-Spindle bore diameter mm 120
-Spindle bore taper ISO 50
-Spindle nose milling diameter mm 203
-Spindle bore stroke mm...
CENTER DMG DMU 50
DMG
07885
5 AXIS
CNC Heidenhain iTNC-530
STROKES:
Axis X mm 500
Axis Y mm 450
Axis Z mm 400
Axis B degrees -5/+110
Axis C degrees 360
TABLE:
AXIS C
Dimensions...
07885
5 AXIS
CNC Heidenhain iTNC-530
STROKES:
Axis X mm 500
Axis Y mm 450
Axis Z mm 400
Axis B degrees -5/+110
Axis C degrees 360
TABLE:
AXIS C
Dimensions...
CENTER EUMACH MOD. SUMO 1400
EUMACH
08925
CNC HEIDENHAIN 426
Table size mm 1500x710
Travel axis X mm 1400
Travel axis Y mm 700
Travel axis Z mm 760
Spindle cone ISO 40
Spindle speed rpm...
08925
CNC HEIDENHAIN 426
Table size mm 1500x710
Travel axis X mm 1400
Travel axis Y mm 700
Travel axis Z mm 760
Spindle cone ISO 40
Spindle speed rpm...
CENTER FAGIMA MOD. FA 12-50 BIG
FAGIMA
08344
CNC HEIDENHAIN iTNC 530
TABLE:
TABLE DIMESIONS 600x1500 mm
MAX TABLE LOAD 1400 Kg
TRAVELS:
X-AXIS TRAVEL 1250 mm
Y-AXIS TRAVEL 700 mm
Z-AXIS...
08344
CNC HEIDENHAIN iTNC 530
TABLE:
TABLE DIMESIONS 600x1500 mm
MAX TABLE LOAD 1400 Kg
TRAVELS:
X-AXIS TRAVEL 1250 mm
Y-AXIS TRAVEL 700 mm
Z-AXIS...
CENTER SHE HONG MOD. HV-80 SG
SHE HONG
06396
CNC MELDAS 520A
STROKE
Longitudinal stroke (axis X) mm 2060
Cross stroke (axis Y) mm 1016
Vertical stroke (axis Z) mm 820
Distance between spindle...
06396
CNC MELDAS 520A
STROKE
Longitudinal stroke (axis X) mm 2060
Cross stroke (axis Y) mm 1016
Vertical stroke (axis Z) mm 820
Distance between spindle...
LATHE GILDEMEISTER CTX 420
GILDEMEISTER
09236
Y-AXIS + C-AXIS
LIVE TOOLS
TAILSTOCK
CNC HEIDENHAIN
WORKING AREA:
Max swing diameter over the bed mm 680
Max swing diameter on the carriage mm...
09236
Y-AXIS + C-AXIS
LIVE TOOLS
TAILSTOCK
CNC HEIDENHAIN
WORKING AREA:
Max swing diameter over the bed mm 680
Max swing diameter on the carriage mm...
.JPG)
SAW BAND GERNETTI SHN 42/A
GERNETTI
08630
AUTOMATIC
CUTTING CAPACITY:
-Round 420 mm
-Square 420x420 mm
-Bundle 380x320 mm
Blade dimensions 6400x41x1,3 mm
Blade motor power 5,5 kW
Cutting...
08630
AUTOMATIC
CUTTING CAPACITY:
-Round 420 mm
-Square 420x420 mm
-Bundle 380x320 mm
Blade dimensions 6400x41x1,3 mm
Blade motor power 5,5 kW
Cutting...
BORING MACHINE PONTIGGIA NH450
PONTIGGIA
09014
Working cylinder diameter from 80 mm to 400 mm
Max working cylinder length 7000 mm
Removal capacity 7/8 mm
Spindle diameter 400 mm with 3...
09014
Working cylinder diameter from 80 mm to 400 mm
Max working cylinder length 7000 mm
Removal capacity 7/8 mm
Spindle diameter 400 mm with 3...
DEEP HOLE DRILLING IMSA MOD. MF800B2
IMSA
09526
CNC SELCA 3045
ROTARY TABLE:
Work surface size 1.000x800 mm
Rotation positions 360,000
Max load allowed (rotating piece) 4000 Kg
AXIS TRAVELS - WORK...
09526
CNC SELCA 3045
ROTARY TABLE:
Work surface size 1.000x800 mm
Rotation positions 360,000
Max load allowed (rotating piece) 4000 Kg
AXIS TRAVELS - WORK...
LATHE CMT URSUS TCH 800x2000
CMT
09188
CNC ECS 2400
Height center mm 400
Distance between center mm 2000
Swing diameter over the bed mm 815
Swing diameter over the cross slide mm 485
Axis...
09188
CNC ECS 2400
Height center mm 400
Distance between center mm 2000
Swing diameter over the bed mm 815
Swing diameter over the cross slide mm 485
Axis...
CENTER HURON VX12
HURON
09623
CNC HEIDENHAIN TNC 620
TABLE:
Table dimensions mm 1400x630
T-slots mm 5x18x125
Max table load Kg 1200
CAPACITY:
Axis X stroke mm 1220
Axis Y stroke...
09623
CNC HEIDENHAIN TNC 620
TABLE:
Table dimensions mm 1400x630
T-slots mm 5x18x125
Max table load Kg 1200
CAPACITY:
Axis X stroke mm 1220
Axis Y stroke...
CENTER AERRE CL80150
AERRE
09663
MOD. CL 80150K ZA
CNC SELCA S4040D
WORK PLAN:
Dimensions 1700x800 mm
Worktop height from ground 1030 mm
Max piece weight on the work surface 2000...
09663
MOD. CL 80150K ZA
CNC SELCA S4040D
WORK PLAN:
Dimensions 1700x800 mm
Worktop height from ground 1030 mm
Max piece weight on the work surface 2000...
.jpeg)
CENTER DECKEL MAHO DMC 100 V
DECKEL MAHO
08776
CNC HEIDENHAIN TNC 426
STROKES:
X axis 1000 mm
Y axis 800 mm
Z axis 500 mm
TABLE:
Table surface with T-slot DIN 650-14 mm 1250x800
Max load on the...
08776
CNC HEIDENHAIN TNC 426
STROKES:
X axis 1000 mm
Y axis 800 mm
Z axis 500 mm
TABLE:
Table surface with T-slot DIN 650-14 mm 1250x800
Max load on the...
GRINDING LODI MOD. T130.65 CN
LODI
09830
Max longitudinal table travel 1500 mm
Min. longitudinal table travel 150 mm
Max cross stroke 650 mm
Grinding length 1300 mm
Grinding width 650...
09830
Max longitudinal table travel 1500 mm
Min. longitudinal table travel 150 mm
Max cross stroke 650 mm
Grinding length 1300 mm
Grinding width 650...
.jpeg)
LATHE OMG ZANOLETTI
OMG ZANOLETTI
09312
MOD. CNA 325x4000
CNC HEIDENHAIN MANUAL PLUS 620
Height of center mm 325
Lenght mm 4000
Wiidth bed mm 440
Turning diameter on the bed mm 650
Turning...
09312
MOD. CNA 325x4000
CNC HEIDENHAIN MANUAL PLUS 620
Height of center mm 325
Lenght mm 4000
Wiidth bed mm 440
Turning diameter on the bed mm 650
Turning...
MILLING PARAPAS MOD. SL75
PARPAS
09866
BED TYPE
CNC HEIDENHAIN 426
4 AXIS
TABLE:
Surface mm 2250x750
N.5 T-slots mm 18
Distance between T-slots mm 125
Max load Kg 4000
WORKING...
09866
BED TYPE
CNC HEIDENHAIN 426
4 AXIS
TABLE:
Surface mm 2250x750
N.5 T-slots mm 18
Distance between T-slots mm 125
Max load Kg 4000
WORKING...
PRESS DIESSE MOD. T85NG+X
DIESSE
09886
Working force kN 850
Hydraulic system working pressure bar 200
Descent speed mm/s 450
Working speed mm/s 35
Return speed mm/s 260
Max weight of...
09886
Working force kN 850
Hydraulic system working pressure bar 200
Descent speed mm/s 450
Working speed mm/s 35
Return speed mm/s 260
Max weight of...
.jpeg)
PRESS NAVA MOD. 2MI/250/125/B
NAVA
09443
Max ram force 250 tons
Max blank holder force 125 tons
Max ram stroke 800 mm
Max blank holder stroke 350 mm
Max ram pressure Kg/cm2 220
Max blank...
09443
Max ram force 250 tons
Max blank holder force 125 tons
Max ram stroke 800 mm
Max blank holder stroke 350 mm
Max ram pressure Kg/cm2 220
Max blank...
PRESS TERENZIO T 400 B/S
TERENZIO
07824
4 COLUMNS
Max power KN 4000
Max pressure Bar 200
Piston diameter mm 505
Stroke of moving bench mm 800
N.2 benches
N.1 working spaces
Day light of...
07824
4 COLUMNS
Max power KN 4000
Max pressure Bar 200
Piston diameter mm 505
Stroke of moving bench mm 800
N.2 benches
N.1 working spaces
Day light of...
CENTER HURON KMILL 10
HURON
09895
CNC HEIDENHAIN TNC620
TABLE:
Table size mm 1250x700
Table load Kg 1500
T-slots number 6
Distance between T-slots mm 100
T-slots width mm 18 H...
09895
CNC HEIDENHAIN TNC620
TABLE:
Table size mm 1250x700
Table load Kg 1500
T-slots number 6
Distance between T-slots mm 100
T-slots width mm 18 H...
LATHE BOMAC MOD. AUTRONIC 40P
BOMAC
09905
mm 200x1000
TECHNICAL FEATURES
Max swing diameter on the bed 400 mm
Max swing diameter on the slide 200 mm
Max turning diameter mm 350
Distance...
09905
mm 200x1000
TECHNICAL FEATURES
Max swing diameter on the bed 400 mm
Max swing diameter on the slide 200 mm
Max turning diameter mm 350
Distance...
BORING CONTI MM.2000x3000
CONTI
ALS.MOB.OO54
DIAMETER SPINDLE mm. 100
TRAVEL VERTICAL mm. 2000
AXIS X mm. 3000
AXIS Y mm. 1500
ROTARY TABLE 1800 X 2000
No 02 BED STOLLE 3000X1500
VISUALIZED ...
ALS.MOB.OO54
DIAMETER SPINDLE mm. 100
TRAVEL VERTICAL mm. 2000
AXIS X mm. 3000
AXIS Y mm. 1500
ROTARY TABLE 1800 X 2000
No 02 BED STOLLE 3000X1500
VISUALIZED ...
BORING PAMA
PAMA
07721
FLOOR TYPE
CONVENTIONAL
Travel axis X mm 3000 (longitudinal)
Travel axis Y mm 2000 (vertical)
Spindle travel W mm 300 (diameter 280 mm)
Spindle...
07721
FLOOR TYPE
CONVENTIONAL
Travel axis X mm 3000 (longitudinal)
Travel axis Y mm 2000 (vertical)
Spindle travel W mm 300 (diameter 280 mm)
Spindle...
BORING TITAN MOD. AFD 150
TITAN
New04651
TRAVEL COLUMN
-SPINDLE DIAM MM.150
-SPINDLE CONE ISO 50
-N. SPINDLE TURNS (24 POSITIONS) TURNS/MIN. 5-1000
-AXIS LONGITUDINAL MM.940
-AXIS VERTICAL...
New04651
TRAVEL COLUMN
-SPINDLE DIAM MM.150
-SPINDLE CONE ISO 50
-N. SPINDLE TURNS (24 POSITIONS) TURNS/MIN. 5-1000
-AXIS LONGITUDINAL MM.940
-AXIS VERTICAL...
.JPG)
EXPERNAL GRINDER RUSSIAN XC3 600x4000
XC3
07433
Distance between center mm 4000
Height of center mm 300
Diameter Wheel mm 800
Width wheel mm 100
Overall size approx mm 12000 x 2900 x 2000 h
With :...
07433
Distance between center mm 4000
Height of center mm 300
Diameter Wheel mm 800
Width wheel mm 100
Overall size approx mm 12000 x 2900 x 2000 h
With :...
FRONTAL LATHE COLOMBO
COLOMBO
New02678
CNC FAGOR 8020
DIAMETER PLATEAU 1200 MM
TURNING DIAMETER: MM 1500
COMPLETE WITH:
AUTOMATIC TURRET
NR.04 TOOLS
USED MACHINE
New02678
CNC FAGOR 8020
DIAMETER PLATEAU 1200 MM
TURNING DIAMETER: MM 1500
COMPLETE WITH:
AUTOMATIC TURRET
NR.04 TOOLS
USED MACHINE
GRINDING LIZZINI MOD.EASY GRIND55
LIZZINI
New02776
EXTERNAL
CNC SIEMENS SINUMERIK 810G
STROKES MM.550x160
COMPLETE WITH:
- AUTOMATIC BALANCE
USED MACHINE
New02776
EXTERNAL
CNC SIEMENS SINUMERIK 810G
STROKES MM.550x160
COMPLETE WITH:
- AUTOMATIC BALANCE
USED MACHINE
HORIZONTAL MACHINE CENTER HECKERT CWK 630
HECKERT
New03432
TECHNICAL CHARACTERISTIC:
10000 RPM
Rapid speed: 24000 mm/min
-No turns/min 10000
Capacity table: 1200 Kg
Acceleration: G. 0,15
Table size: 630 x...
New03432
TECHNICAL CHARACTERISTIC:
10000 RPM
Rapid speed: 24000 mm/min
-No turns/min 10000
Capacity table: 1200 Kg
Acceleration: G. 0,15
Table size: 630 x...
LATHE EST TICINO 420x6000
EST TICINO
07382
Height of center mm 420
Distance between center mm 6000
Swing over bed mm 840
Swing over carriage mm 520
EQUIPPED WITH:
3 jaws chuck diameter mm...
07382
Height of center mm 420
Distance between center mm 6000
Swing over bed mm 840
Swing over carriage mm 520
EQUIPPED WITH:
3 jaws chuck diameter mm...
LATHE MORANDO 600x3200
MORANDO
TRN.PAG.O573
MOD. SM.6O
MOTOR CC MAX POWER KW 35
PLATEAU 4 JAW DIAM.MM.1000
GUIDES WIDTH MM.1000
Height of center mm.600
Max diameter swing over bed...
TRN.PAG.O573
MOD. SM.6O
MOTOR CC MAX POWER KW 35
PLATEAU 4 JAW DIAM.MM.1000
GUIDES WIDTH MM.1000
Height of center mm.600
Max diameter swing over bed...
LATHE RYAZAN PR 731
RYAZAN
09177
Height of centre 500 mm
Distance between centre 10.000 mm
Swing over carriage 670 mm
Spindle rotation 5-500 rpm
Bar passaging 130 mm
Bed width 770...
09177
Height of centre 500 mm
Distance between centre 10.000 mm
Swing over carriage 670 mm
Spindle rotation 5-500 rpm
Bar passaging 130 mm
Bed width 770...
MILLING CORREA MOD. CF-17 D
CORREA
09184
CNC HEIDENHAIN
Axis X stroke mm 2000
Axis Y stroke mm 800
Axis Z stroke mm 800
Table dimensions mm 2000x700
Max spindle speed rpm 3000
Spindle taper...
09184
CNC HEIDENHAIN
Axis X stroke mm 2000
Axis Y stroke mm 800
Axis Z stroke mm 800
Table dimensions mm 2000x700
Max spindle speed rpm 3000
Spindle taper...
MILLING RAMBAUDI RX 1000
RAMBAUDI
08773
CNC SELCA S1200
Table dimensions mm 2500x1000
Axis X stroke mm 2000
Axis Y stroke mm 1200
Axis Z stroke mm 1000
Spinde taper mm ISO 50
Spindle speed...
08773
CNC SELCA S1200
Table dimensions mm 2500x1000
Axis X stroke mm 2000
Axis Y stroke mm 1200
Axis Z stroke mm 1000
Spinde taper mm ISO 50
Spindle speed...
PORTAL MILLING JOBS-MULTINORMA
JOBS
New04594
MOD. 25-70
CNC NUM 750F
AXIS X: mm 7000
AXIS Y: mm 2300
AXIS Z: mm 500
Min-max distance spindle-table 900-1400
Distance between column mm 2500
Table...
New04594
MOD. 25-70
CNC NUM 750F
AXIS X: mm 7000
AXIS Y: mm 2300
AXIS Z: mm 500
Min-max distance spindle-table 900-1400
Distance between column mm 2500
Table...
CENTER HECKERT CWK630
HECKERT
New03431
HORIZONTAL MACHINE CENTER
TECHNICAL CHARACTERISTIC:
6000 RPM
Rapid speed: 6000 mm/min
Capacity table: 1200 Kg
Acceleration: G. 0,15
Table size: 630...
New03431
HORIZONTAL MACHINE CENTER
TECHNICAL CHARACTERISTIC:
6000 RPM
Rapid speed: 6000 mm/min
Capacity table: 1200 Kg
Acceleration: G. 0,15
Table size: 630...
EXTERNAL GRINDER TOS BUT 63/3000
TOS
09298
Length 3000 mm
Grinding diameter mm 630
Center height 315 mm
Max wheel diameter mm 750
Total installed power kVa 41
Piece load ton 2,5
Machine...
09298
Length 3000 mm
Grinding diameter mm 630
Center height 315 mm
Max wheel diameter mm 750
Total installed power kVa 41
Piece load ton 2,5
Machine...
LATHE KIA TURN 21 LMS
KIA
08070
LIVE TOOLS
CNC MITSUBISHI MELDAS M520AL
WORKING CAPACITY:
-Swing diameter on the bed mm 550
-Max turning diameter 255 mm
-Main spindle diameter 210...
08070
LIVE TOOLS
CNC MITSUBISHI MELDAS M520AL
WORKING CAPACITY:
-Swing diameter on the bed mm 550
-Max turning diameter 255 mm
-Main spindle diameter 210...
LATHE MERLI CLOVIS 50B
MERLI CLOVIS
09819
Height of centers over the bench 640 mm
Height of centers over the carriage 460 mm
Swing diameter on the bench 1280 mm
Swing diameter on the carriage...
09819
Height of centers over the bench 640 mm
Height of centers over the carriage 460 mm
Swing diameter on the bench 1280 mm
Swing diameter on the carriage...
CENTER MIKRON MOD. VCP 1350
MIKRON
09640
CNC Heidenhain iTNC 530
TRAVEL:
X 1350 mm
Y 900 mm
Z 750 mm
TABLE:
Table dimensions 1425x860 mm
Max table load 1800kg
SPINDLE:
Spindle speed 0-12000...
09640
CNC Heidenhain iTNC 530
TRAVEL:
X 1350 mm
Y 900 mm
Z 750 mm
TABLE:
Table dimensions 1425x860 mm
Max table load 1800kg
SPINDLE:
Spindle speed 0-12000...
EXTERNAL GRINDING PREZIOSA
GRINDING KENT KGS-84 WMA2
KENT
09788
WORKING AREA:
Workin plane 800x400 mm
Longitudinal stroke 920 mm
Crossl stroke 450 mm
Distance spindle center-table 600 mm
Max load capacity on the...
09788
WORKING AREA:
Workin plane 800x400 mm
Longitudinal stroke 920 mm
Crossl stroke 450 mm
Distance spindle center-table 600 mm
Max load capacity on the...
SAW DANOBT MOD. CP650A
DANOBAT
09033
CNC DANOBAT
Round cutting capacity diam. 660 mm
Rectangular cutting capacity mm 660x660
Work table height 800 mm
Flywheels diameter 760 mm
Blade...
09033
CNC DANOBAT
Round cutting capacity diam. 660 mm
Rectangular cutting capacity mm 660x660
Work table height 800 mm
Flywheels diameter 760 mm
Blade...
MILLING BOMAC GEVS 300AL
BOMAC
09794
TECHNICAL AND CONSTRUCTION FEATURES:
TABLE
Dimensions 1470x370 mm
T-slots (center distance) mm 18x3x80
STROKES
Longitudinal (manual/automatic)...
09794
TECHNICAL AND CONSTRUCTION FEATURES:
TABLE
Dimensions 1470x370 mm
T-slots (center distance) mm 18x3x80
STROKES
Longitudinal (manual/automatic)...
DRILLING SASS TRP 3500
SASS
07295
Drilling diameter mm 120
Lenght arm mm 3500
Vertical travel mm 1430
Max angle rotation 360 degree
Spindle diameter mm 135
Spindle stroke mm...
07295
Drilling diameter mm 120
Lenght arm mm 3500
Vertical travel mm 1430
Max angle rotation 360 degree
Spindle diameter mm 135
Spindle stroke mm...
LATHE ZMM MOD. CU 500MT x 2000
ZMM
08912
TRADITIONAL
Height of center mm.250
Turning diameter on bed mm.500
Turning diameter on carriage mm. 300
Turning diameter on gap mm.700
Whidth of bed...
08912
TRADITIONAL
Height of center mm.250
Turning diameter on bed mm.500
Turning diameter on carriage mm. 300
Turning diameter on gap mm.700
Whidth of bed...
LATHE CONVENTIONAL MERLI CLOVIS 50
MERLI CLOVIS
New04671
Height of center mm.510
Max diameter swing over bed mm.1020
Max diameter swing over cross carriage mm.620
Max diameter swing over gap...
New04671
Height of center mm.510
Max diameter swing over bed mm.1020
Max diameter swing over cross carriage mm.620
Max diameter swing over gap...
LATHE ZMM MOD. CU 500MT x 1500
ZMM
08911
TRADITIONAL
Height of center mm.250
Turning diameter on bed mm.500
Turning diameter on carriage mm. 300
Turning diameter on gap mm.700
Whidth of bed...
08911
TRADITIONAL
Height of center mm.250
Turning diameter on bed mm.500
Turning diameter on carriage mm. 300
Turning diameter on gap mm.700
Whidth of bed...
LATHE GORNATI LEGOR 350
GORNATI
07293
Height of center 350 mm
Ditance between center 5000 mm
Max turning diameter over carriage mm 420
Max turning diameter on bed mm 700
spindle motor...
07293
Height of center 350 mm
Ditance between center 5000 mm
Max turning diameter over carriage mm 420
Max turning diameter on bed mm 700
spindle motor...
LATHE RIMEX 380x5000
RIMEX
08150
MOD. CU 760
CAPACITY:
Heigh of center mm 380
Swing diameter over bed mm 760
Swing diameter over carriage mm 520
Distance between centers 5000...
08150
MOD. CU 760
CAPACITY:
Heigh of center mm 380
Swing diameter over bed mm 760
Swing diameter over carriage mm 520
Distance between centers 5000...
VERTICAL CENTRE MATSURA Mod. RA 46
MATSUURA
New04388
VERTICAL
-CNC YASNAC-J 300 VIDEO GRAPHIC
-AXIS X MM. 1020
-AXIS Y MM.550
-AXIS Z MM.510
-TABLE SIZE MM.1000X490
-DISTANCE TABLE/ SPINDLE NOSE...
New04388
VERTICAL
-CNC YASNAC-J 300 VIDEO GRAPHIC
-AXIS X MM. 1020
-AXIS Y MM.550
-AXIS Z MM.510
-TABLE SIZE MM.1000X490
-DISTANCE TABLE/ SPINDLE NOSE...
CENTER MIND MACH-T VMC 1400/A
MIND
09846
CNC FANUC 0i-MC
TABLE:
Table dimensiona mm 1700x850
Max load on table Kg 200
STROKES:
Longitudinal X axis stroke 1400 mm
Cross Y axis stroke 850...
09846
CNC FANUC 0i-MC
TABLE:
Table dimensiona mm 1700x850
Max load on table Kg 200
STROKES:
Longitudinal X axis stroke 1400 mm
Cross Y axis stroke 850...
CENTER SIGMA MOD. ZENIT 2P-M
SIGMA
09191
VERTICAL
PALLET CHANGE
CNC FANUC 18i-M
STROKES:
X axis stroke 750 mm
Y axis stroke 420 mm
Z axis stroke 450 mm
Distance spindle axis/column mm...
09191
VERTICAL
PALLET CHANGE
CNC FANUC 18i-M
STROKES:
X axis stroke 750 mm
Y axis stroke 420 mm
Z axis stroke 450 mm
Distance spindle axis/column mm...
CENTRE HECKERT MOD. CWK 400
HECKERT
New04760
HORIZONTAL
CNC SIEMENS SINUMERIK 840C
-AXIS X MM.650
-AXIS Y MM.500
-AXIS Z MM.650
-HEIGHT FLOOR TO WORKING SURFACE MM.1000
-TOOL MAGAZINE N. 60
-MAX...
New04760
HORIZONTAL
CNC SIEMENS SINUMERIK 840C
-AXIS X MM.650
-AXIS Y MM.500
-AXIS Z MM.650
-HEIGHT FLOOR TO WORKING SURFACE MM.1000
-TOOL MAGAZINE N. 60
-MAX...
GRINDING DELTA MOD. TP 750/500
DELTA
05852
Max grinding surface 750x550 mm
Table surface 700x400 mm
Max. grinding lenght 750 mm
Max. grinding width 500 mm
Max. distance from table to spinale...
05852
Max grinding surface 750x550 mm
Table surface 700x400 mm
Max. grinding lenght 750 mm
Max. grinding width 500 mm
Max. distance from table to spinale...
GRINDING NOVARESE NOVA 10/15
NOVA
06621
-Min grinding diameter mm 10/150
-Grinding lenght mm 300
-Max table stroke mm 310
-Spindle axis height from table plan mm 370
-Rotation diameter mm...
06621
-Min grinding diameter mm 10/150
-Grinding lenght mm 300
-Max table stroke mm 310
-Spindle axis height from table plan mm 370
-Rotation diameter mm...
LATHE POTISJE MOD. PA 50 DC
POTISJE
06815
Distance between centers 3000 mm
Height center on the bed 500 mm
Height center on the gap 650 mm
Swing diameter on the bed 1000 mm
Swing diameter on...
06815
Distance between centers 3000 mm
Height center on the bed 500 mm
Height center on the gap 650 mm
Swing diameter on the bed 1000 mm
Swing diameter on...
.JPG)
MILLING MECOF MOD. CR 15
MECOF
New04886
Table dimensions mm 3000x1200
Axis X stroke mm 3000
Axis Y stroke (ram) mm 950
Axis Z stroke (vertical) mm 1500
Spindle taper ISO 50
Spindle speed...
New04886
Table dimensions mm 3000x1200
Axis X stroke mm 3000
Axis Y stroke (ram) mm 950
Axis Z stroke (vertical) mm 1500
Spindle taper ISO 50
Spindle speed...
MILLING OMV PARPAS FAS BPF-4-1600
PARPAS
09208
CNC SELCA 1200
Longitudinal stroke mm 1750
Cross stroke mm 750
Vertical stroke mm 650
Dualspindle milling head
Taper DIN 69871-40
Tool change 30...
09208
CNC SELCA 1200
Longitudinal stroke mm 1750
Cross stroke mm 750
Vertical stroke mm 650
Dualspindle milling head
Taper DIN 69871-40
Tool change 30...
MILLING SECMU MOD. C6
SECMU
09201
CNC Z16 DELECTRON
X axis stroke 2000 mm
Y axis stroke 1100 mm
Z axis stroke 700 mm
Table dimensions mm 2200x700
Spindle motor in d.c. kW 16
Spindle...
09201
CNC Z16 DELECTRON
X axis stroke 2000 mm
Y axis stroke 1100 mm
Z axis stroke 700 mm
Table dimensions mm 2200x700
Spindle motor in d.c. kW 16
Spindle...
PRESS RADAELLI 200 TON.
RADAELLI
08594
Max pressure ton 200
Stroke mm 200
Max distance between table and slide mm 800
Table dimensions mm 1400x900
Slide dimensions mm 1200x850
Distance...
08594
Max pressure ton 200
Stroke mm 200
Max distance between table and slide mm 800
Table dimensions mm 1400x900
Slide dimensions mm 1200x850
Distance...
PRESS VICLA MOD. TOR 250/25
VICLA
09512
CNC ESA S 530
Force ton 250
Bending lenght mm 2500
Distance between center mm 2000
Gap mm 400
Cylinders stroke mm 200
Stroke mm 100
Height table mm...
09512
CNC ESA S 530
Force ton 250
Bending lenght mm 2500
Distance between center mm 2000
Gap mm 400
Cylinders stroke mm 200
Stroke mm 100
Height table mm...
SCREW PRESS DELLAVIA VITE 14O
SPARK ERODER CHARMILLES
CHARMILLES
07969
CHARMILLES ROBOFORM 40
CNC EROWA IS 50
Tank dimensions mm 1220x795x465
Table dimension mm 750x500
Workpiece weight kg 1000
Axis travel X mm 500...
07969
CHARMILLES ROBOFORM 40
CNC EROWA IS 50
Tank dimensions mm 1220x795x465
Table dimension mm 750x500
Workpiece weight kg 1000
Axis travel X mm 500...
VERTICAL LATHE DAEWOO PUMA IV 300
DAEWOO
07810
CNC Fanuc 18i-TB
CAPACITA':
Max swing diameter mm 400
Max turning diameter mm 320
Max turning lenght mm 254
Max laod Kg 100
STROKES:
Axis X stroke...
07810
CNC Fanuc 18i-TB
CAPACITA':
Max swing diameter mm 400
Max turning diameter mm 320
Max turning lenght mm 254
Max laod Kg 100
STROKES:
Axis X stroke...
WIRE ERODER ONA AE-400
ONA
09654
X stroke mm 600
Y stroke 400 mm
Z stroke 400 mm
U - V stroke 80 mm
Max piece dimensions (X,Y,Z) mm 1000x810x400
Max piece weight 3000 kg
Conical...
09654
X stroke mm 600
Y stroke 400 mm
Z stroke 400 mm
U - V stroke 80 mm
Max piece dimensions (X,Y,Z) mm 1000x810x400
Max piece weight 3000 kg
Conical...
LATHE BMP 260x2000
BMP
07658
MOD. 260
Height center mm 260
Distance between center mm 2000
Swing diameter over bed mm 530
Swing diameter over carriage mm 310
Swing diameter over...
07658
MOD. 260
Height center mm 260
Distance between center mm 2000
Swing diameter over bed mm 530
Swing diameter over carriage mm 310
Swing diameter over...
BENDER PROFILES COLD GLM 160
GML
CLD.VER.OOO3
MOD PA 16
- Wing external mm.100x100x14
Diameter min. mm.800
- Wing internal mm.90x90x9
Diameter min. mm.800
- HE horizontal mm.80x80 ...
CLD.VER.OOO3
MOD PA 16
- Wing external mm.100x100x14
Diameter min. mm.800
- Wing internal mm.90x90x9
Diameter min. mm.800
- HE horizontal mm.80x80 ...
LATHE PADOVANI LABOR 275x1500
PADOVANI
08828
Height of centers mm 275
Distance between centers mm 1500
Turning diameter on the gap mm 740
Turning diameter on the cross slide mm 360
Gap lenght mm...
08828
Height of centers mm 275
Distance between centers mm 1500
Turning diameter on the gap mm 740
Turning diameter on the cross slide mm 360
Gap lenght mm...
LATHE PUMA MOD. 230 MB
PUMA
09683
LIVE TOOLS
CNC FANUC 18-T
CAPACITY:
Max. rotating diameter on table mm 550
Max. rotating diameter on carriage mm 390
Max. turning diameter mm...
09683
LIVE TOOLS
CNC FANUC 18-T
CAPACITY:
Max. rotating diameter on table mm 550
Max. rotating diameter on carriage mm 390
Max. turning diameter mm...
ROTARY TABLE COLGAR
TEACH-IN LATHE ECOCA MOD. EL-6120E
ECOCA
New03932
CNC MITSUBISHI MOD. M 520
DISTANCE BETWEEN CENTER MM 2000
HEIGHT OF CENTER MM 305
MAX TURNING DIAMETER OVER BED MM 610
MAX TURNING DIAMETER OVER...
New03932
CNC MITSUBISHI MOD. M 520
DISTANCE BETWEEN CENTER MM 2000
HEIGHT OF CENTER MM 305
MAX TURNING DIAMETER OVER BED MM 610
MAX TURNING DIAMETER OVER...
VERTICAL MACHINING CENTRE FEELER FV600
FEELER
09249
CNC SIEMENS SINUMERIK 810D
TABLE:
Table size mm 400x800
T slots mm 18x3x100
Table load capacity Kg 300
AXIS:
X axis mm 610
Y axis mm 500
Z axis mm...
09249
CNC SIEMENS SINUMERIK 810D
TABLE:
Table size mm 400x800
T slots mm 18x3x100
Table load capacity Kg 300
AXIS:
X axis mm 610
Y axis mm 500
Z axis mm...
MILLING BOMAC MOD. FU30
BOMAC
09875
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
TABLE
Dimensions mm 1470x300
“T” slots mm N 3 16
Distance between slots mm 80
Table rotation...
09875
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
TABLE
Dimensions mm 1470x300
“T” slots mm N 3 16
Distance between slots mm 80
Table rotation...
.JPG)
CENTERING MACHINE TOVAGLIERI MOD. HYDROCENTR X2
TOVAGLIERI
07446
WITH 2 HEAD.
-Max workpiece length allowed for two simultaneous facing and centerings and with workpiece clamped with two vices mm 5000
-Min...
07446
WITH 2 HEAD.
-Max workpiece length allowed for two simultaneous facing and centerings and with workpiece clamped with two vices mm 5000
-Min...
ERODER ONA HS-600
ONA
09655
TUFF
3-axis controlled
AXIS TRAVELS:
X mm 1000
Y mm 600
Z mm 500
Tank size mm 1700x1000x700
Support table mm 1200x700
Maximum load capacity 4,000...
09655
TUFF
3-axis controlled
AXIS TRAVELS:
X mm 1000
Y mm 600
Z mm 500
Tank size mm 1700x1000x700
Support table mm 1200x700
Maximum load capacity 4,000...
GANTRY PLANO- MILLER CARNAGHI
CARNAGHI
New01499
Max stroke mm.4500x1200X 800
single milling spindle
No 2 lateral carriage
used machine
New01499
Max stroke mm.4500x1200X 800
single milling spindle
No 2 lateral carriage
used machine
LATHE 500x5000
RUMENO
NEW02736
height of centre mm 500
Max diameter swing over bed: mm 1000
Max diameter swing over cross carriage mm 680
distance between center mm 5000
Bed width...
NEW02736
height of centre mm 500
Max diameter swing over bed: mm 1000
Max diameter swing over cross carriage mm 680
distance between center mm 5000
Bed width...
LATHE CMT MOD. URSUS TC 500X1500
CMT
New04801
AUTOLATHE
CNC FAGOR 8055T
-HEIGHT OF CENTER FROM PLAN MM.250
-DISTANCE BETWEEN CENTRE MM.1500
-MAX DIAM OVER PLAN MM.505
-MAX DIAM OVER SLIDE...
New04801
AUTOLATHE
CNC FAGOR 8055T
-HEIGHT OF CENTER FROM PLAN MM.250
-DISTANCE BETWEEN CENTRE MM.1500
-MAX DIAM OVER PLAN MM.505
-MAX DIAM OVER SLIDE...
.jpeg)
LATHE MORI SEIKI DL 150 MC
MORI SEIKI
07472
LIVE TOOLS
Controllo numerico MSC-518
Max turning diameter mm 170
Max bar turning diameter mm 46
Max lworking lenght mm 200
Main motor power Kw...
07472
LIVE TOOLS
Controllo numerico MSC-518
Max turning diameter mm 170
Max bar turning diameter mm 46
Max lworking lenght mm 200
Main motor power Kw...
PRESS ROVETTA 2OO TON
ROVETTA
PRS.STA.OO14
STROKE mm.140
STROKE / Min Nr. 120
BED SIZE mm 500 X 530
DISTANCE BETWEEN BED AND SLEDGE HAMMER mm 420
CUSHION BLANK HOLDER
SLIDE STROKE mm.40...
PRS.STA.OO14
STROKE mm.140
STROKE / Min Nr. 120
BED SIZE mm 500 X 530
DISTANCE BETWEEN BED AND SLEDGE HAMMER mm 420
CUSHION BLANK HOLDER
SLIDE STROKE mm.40...
MILLING ZEUS MOD. FZ 160
ZEUS
09209
WITH D.R.O.
TABLE:
Surface 1600x360 mm
X axis stroke 1200 mm
Y axis stroke 380 mm
Z axis stroke 510 mm
SPINDLE:
Spindle taper ISO 50
Spindle nose...
09209
WITH D.R.O.
TABLE:
Surface 1600x360 mm
X axis stroke 1200 mm
Y axis stroke 380 mm
Z axis stroke 510 mm
SPINDLE:
Spindle taper ISO 50
Spindle nose...
.jpeg)
WIRE EROSION ONA MOD. AX4
ONA
09414
CNC ONA
Axis X 600 mm
Axis Y 400 mm
Axis Z 400 mm
Axis U 240 mm
Axis V 240 mm
Max piece lenght 1000 mm
Max piece width 810 mm
Max piece height 400...
09414
CNC ONA
Axis X 600 mm
Axis Y 400 mm
Axis Z 400 mm
Axis U 240 mm
Axis V 240 mm
Max piece lenght 1000 mm
Max piece width 810 mm
Max piece height 400...
LATHE BOMAC AUTRON LUX FC 250
BOMAC
09879
250x2000
TECHNICAL AND CONSTRUCTION FEATURES:
Max swing on the bed 500 mm
Max swing on the slide 300 mm
Max swing in the gap 710 mm
Gap length 240...
09879
250x2000
TECHNICAL AND CONSTRUCTION FEATURES:
Max swing on the bed 500 mm
Max swing on the slide 300 mm
Max swing in the gap 710 mm
Gap length 240...
CENTER LEADWELL V40
LEADWELL
08952
TAVOLA:
Table dimensions mm 1200x500
Max load Kg 500
STROKES:
Axis X mm 1020
Axis Y mm 510
Axis Z mm 510
Distance between spindle nose to table...
08952
TAVOLA:
Table dimensions mm 1200x500
Max load Kg 500
STROKES:
Axis X mm 1020
Axis Y mm 510
Axis Z mm 510
Distance between spindle nose to table...
LATHE OMG 300x3000
OMG ZANOLETTI
08789
Height of center mm 300
Distance between center mm 3000
Bar passaging mm 90
Spindle taper CAM-LOCK 8''
EQUIPPED WITH:
- 2 axis D.R.O.
- fixed steady...
08789
Height of center mm 300
Distance between center mm 3000
Bar passaging mm 90
Spindle taper CAM-LOCK 8''
EQUIPPED WITH:
- 2 axis D.R.O.
- fixed steady...
MILLING ARNO MOD. F30
ARNO
06981
TABLE:
Table dimensions mm 1550x350
STROKES:
Longitudinal mm 1150
Cross mm 330
Vertical mm 440
SPINDLE:
Spindle taper ISO 50
Spindle speed n.12 - rpm...
06981
TABLE:
Table dimensions mm 1550x350
STROKES:
Longitudinal mm 1150
Cross mm 330
Vertical mm 440
SPINDLE:
Spindle taper ISO 50
Spindle speed n.12 - rpm...
MILLING BOMAC GEVS300AL
BOMAC
09837
TURRET
Technical and construction features:
TABLE
-Dimensions 1470x370 mm
-T-slots (center distance) 18x3x80 mm
STROKES
-Longitudinal (manual/...
09837
TURRET
Technical and construction features:
TABLE
-Dimensions 1470x370 mm
-T-slots (center distance) 18x3x80 mm
STROKES
-Longitudinal (manual/...
PRESS BRAKE CBC MOD. 100/30-IS
CBC
07337
OLEODINAMIC
6 AXIS
NEW CNC DELEM 69T
Bed lenght mm 3050
Tonnage t. 100
Equipped with:
Mechanical compensation system
USED MACHINE
07337
OLEODINAMIC
6 AXIS
NEW CNC DELEM 69T
Bed lenght mm 3050
Tonnage t. 100
Equipped with:
Mechanical compensation system
USED MACHINE
TRUCK LIFT LUGLI 60 C
LUGLI
NEW01288
DIESEL
WEIGHT LOAD: KG. 6000
ELEVATION: MM.5000
POWER STEERING, TRASLATOR
USED MACHINE
NEW01288
DIESEL
WEIGHT LOAD: KG. 6000
ELEVATION: MM.5000
POWER STEERING, TRASLATOR
USED MACHINE
PUNCHING SHEAR ADRIA MACHINE HKM 85
ADRIATICA INDUSTRIALE
09259
PUNCHING:
Diameter x max thickness mm 33x20
Diameter x thickness mm 57x12
Max diameter mm 110x4
Stroke 80 mm
Shot counter in (20 mm) x25
Gap mm...
09259
PUNCHING:
Diameter x max thickness mm 33x20
Diameter x thickness mm 57x12
Max diameter mm 110x4
Stroke 80 mm
Shot counter in (20 mm) x25
Gap mm...
AUTOMATIC LATHE OMG ZANOLETTI
OMG ZANOLETTI
07222
MOD. E250x1000
CNC VIDUE
Height of center mm 250
Turning diameter on the bed mm 500
Turning diameter on the cross carriage mm 250
Turning diameter...
07222
MOD. E250x1000
CNC VIDUE
Height of center mm 250
Turning diameter on the bed mm 500
Turning diameter on the cross carriage mm 250
Turning diameter...
CENTER FAMUP MC60
FAMUP
09649
CNC SELCA S4045PD
Dimensions mm 800x375
T-slots 3
T-slots width mm 14
T-slots distance mm 125
Max load Kg 250
STROKES:
Longitudinal X axis mm 600...
09649
CNC SELCA S4045PD
Dimensions mm 800x375
T-slots 3
T-slots width mm 14
T-slots distance mm 125
Max load Kg 250
STROKES:
Longitudinal X axis mm 600...
CENTER FAMUP MCL120E
FAMUP
09662
Selca 3045 CNC
TRAVELS:
X axis 1200 mm
Y axis 600 mm
Z axis 600 mm
TABLE:
Table size 1380x620 mm
T-slots 5
T-slots widht mm 18
T-slots distance mm...
09662
Selca 3045 CNC
TRAVELS:
X axis 1200 mm
Y axis 600 mm
Z axis 600 mm
TABLE:
Table size 1380x620 mm
T-slots 5
T-slots widht mm 18
T-slots distance mm...
.jpeg)
DRILLING SASS MOD. TM 80-2500
SASS
08883
Max drilling diameter on steel mm 80
Max drilling diameter on cast iron mm 100
Min. and max arm mm 685-2500
Base-spindle nose min. and max mm...
08883
Max drilling diameter on steel mm 80
Max drilling diameter on cast iron mm 100
Min. and max arm mm 685-2500
Base-spindle nose min. and max mm...
DRILLING SASS MOD.TM 2500
SASS
07450
CAPACITY':
Drilling capacity on steel R = 60 mm 100
Drilling capacity on cast iron 20-22 mm 150
SPINDLE:
Sliding quill diam. mm 110
Cone taper Morse...
07450
CAPACITY':
Drilling capacity on steel R = 60 mm 100
Drilling capacity on cast iron 20-22 mm 150
SPINDLE:
Sliding quill diam. mm 110
Cone taper Morse...
LATHE CMT URSUS 300x1500
CMT
09671
Height of centers 300 mm
Distance between centers 1500 mm
Spindle bore 105 mm
Spindle nose CAM-LOCK 8''
Front bearing diameter 140 mm
Max turning...
09671
Height of centers 300 mm
Distance between centers 1500 mm
Spindle bore 105 mm
Spindle nose CAM-LOCK 8''
Front bearing diameter 140 mm
Max turning...
LATHE CMT URSUS TC 600x1500
CMT
09670
CNC FAGOR 8055
Height of centers 300 mm
Distance between centers 1500 mm
Swing diameter on the bed 600 mm
Swing diameter on the slide 365 mm
Z-axis...
09670
CNC FAGOR 8055
Height of centers 300 mm
Distance between centers 1500 mm
Swing diameter on the bed 600 mm
Swing diameter on the slide 365 mm
Z-axis...
LATHE GRAZIANO MOD. GT 700 C
GRAZIANO
09537
CNC Fagor
Spindle diameter 400 mm
Length 1.800 mm
Bar passaging 127 mm
Tool holder turret with 12 lives positions
Rest
Chip conveyor
Weight 11.000...
09537
CNC Fagor
Spindle diameter 400 mm
Length 1.800 mm
Bar passaging 127 mm
Tool holder turret with 12 lives positions
Rest
Chip conveyor
Weight 11.000...
MILLING FIL FA 130
FIL
06782
CNC HEIDENHAIN TNC 355
STROKE:
Longitudinal axis X mm 1300
Cross axis Y mm 650
Vertical axis Z mm 750
TABLE:
Working surface mm 1600x750
T-slots mm...
06782
CNC HEIDENHAIN TNC 355
STROKE:
Longitudinal axis X mm 1300
Cross axis Y mm 650
Vertical axis Z mm 750
TABLE:
Working surface mm 1600x750
T-slots mm...
MILLING SECMU FAS A2
SECMU
06830
CNC SELCA 1200
Axis X mm 1500
Axis Y mm 800
Axis Z mm 700
Table dimensions mm 1300x700
EQUIPPED WITH:
Birotative head
OPTIONAL:
Tavola girevole mm...
06830
CNC SELCA 1200
Axis X mm 1500
Axis Y mm 800
Axis Z mm 700
Table dimensions mm 1300x700
EQUIPPED WITH:
Birotative head
OPTIONAL:
Tavola girevole mm...
LATHE BOMAC AUTRON LUX FC 250
BOMAC
09793
250x1500
TECHNICAL AND CONSTRUCTION FEATURES
Max swing diameter on the bed 500 mm
Max swing diameter on the slide 300 mm
Max swing diameter in the...
09793
250x1500
TECHNICAL AND CONSTRUCTION FEATURES
Max swing diameter on the bed 500 mm
Max swing diameter on the slide 300 mm
Max swing diameter in the...
AUTO-LATHE CMT URSUS PLUS 300
CMT
08739
CNC VIDEU NC 916
Distance between center mm 2000
Height of center mm 300
Spindle bore mm 105
Spindle taper Type Camlook
EQUIPPED WITH:
Self-centring...
08739
CNC VIDEU NC 916
Distance between center mm 2000
Height of center mm 300
Spindle bore mm 105
Spindle taper Type Camlook
EQUIPPED WITH:
Self-centring...
.jpeg)
CENTER EUMACH MOD. SUMO 610
EUMACH
08749
CNC SELCA S3045PD
Table dimensions mm 800x450
Max table load Kg 400
T-slots (n. x dimensions) 3x18
Distance between spindle nose/table plane mm...
08749
CNC SELCA S3045PD
Table dimensions mm 800x450
Max table load Kg 400
T-slots (n. x dimensions) 3x18
Distance between spindle nose/table plane mm...
CENTER FAGIMA MOD. MGFV 1000
FAGIMA
07523
CNC Heidenhain 410
STROKES:
Axis X longitudinal mm 1000
Axis Y cross mm 550
Axis Z vertical mm 500
TABLE:
Table dimensions mm...
07523
CNC Heidenhain 410
STROKES:
Axis X longitudinal mm 1000
Axis Y cross mm 550
Axis Z vertical mm 500
TABLE:
Table dimensions mm...
GENERATOR CURRENT FURLAN
FURLANI
New02321
KWA 440
On fixed bed
1500 turns/1'
Service continuous
Usefull without limits in constant load
CONSISTING OF:
- Engine Diesel CUMMIN 8 type VTA...
New02321
KWA 440
On fixed bed
1500 turns/1'
Service continuous
Usefull without limits in constant load
CONSISTING OF:
- Engine Diesel CUMMIN 8 type VTA...
GRINDING FORTUNA MOD. UFC-630
FORTUNA
06622
-Grinding length mm 630
-Height of center mm 60
-Wheel width mm 60
-Wheel diameter mm 500
Equipped with:
-Equipment for internal
-Diamond
-Steady...
06622
-Grinding length mm 630
-Height of center mm 60
-Wheel width mm 60
-Wheel diameter mm 500
Equipped with:
-Equipment for internal
-Diamond
-Steady...
GRINDING LODI MOD. T8050 CN
LODI
09672
Max longitudinal stroke of the table 920 mm
Max cross stroke 500 mm
Grinding length 800 mm
Grinding width 500 mm
Worktop dimensions 800x450...
09672
Max longitudinal stroke of the table 920 mm
Max cross stroke 500 mm
Grinding length 800 mm
Grinding width 500 mm
Worktop dimensions 800x450...
LATHE PADOVANI LABOR 200x1500
PADOVANI
08827
DIMENSIONS:
Height of centers mm 200
Distance between centers mm 1500
Bed width mm 290
Max turning diameter on the bed mm 400
Max turning diameter on...
08827
DIMENSIONS:
Height of centers mm 200
Distance between centers mm 1500
Bed width mm 290
Max turning diameter on the bed mm 400
Max turning diameter on...
SLOTTING MACHINE GUSLOFF MM. 800
VERTICAL HONNG MACHINE
06614
Stroke mm 1200
Working diameter mm 60-230
USED MACHINE
Stroke mm 1200
Working diameter mm 60-230
USED MACHINE
VERTICAL MACHINE CENTER SIGMA
SIGMA
08029
MISSION 1-P
CNC FANUC O-M
PALLET CHANGE: N. 2
Pallet surface mm 600x400
Distance spindle nose/pallet mm 150/600
Max load on pallet Kg...
08029
MISSION 1-P
CNC FANUC O-M
PALLET CHANGE: N. 2
Pallet surface mm 600x400
Distance spindle nose/pallet mm 150/600
Max load on pallet Kg...
VERTICAL MACHINE CENTER SIGMA
SIGMA
08033
MISSION 3
CNC Selca 3045
TABLE
Working surface mm 1150x500
Max load Kg 1000
TRAVEL
Axis X mm 1000
Axis Y mm 500
Axis Z mm 550
Distance spindle...
08033
MISSION 3
CNC Selca 3045
TABLE
Working surface mm 1150x500
Max load Kg 1000
TRAVEL
Axis X mm 1000
Axis Y mm 500
Axis Z mm 550
Distance spindle...
DRILLING BOMAC RD 3050X16/1
BOMAC
09435
50x1600 mm
WITH ELECTROHYDRAULIC CLAMPING
Max drilling capacity 50 mm
Tapping capacity mm 24
Distance spindle axis/column min/max mm 350-1600
Head...
09435
50x1600 mm
WITH ELECTROHYDRAULIC CLAMPING
Max drilling capacity 50 mm
Tapping capacity mm 24
Distance spindle axis/column min/max mm 350-1600
Head...
.JPG)
EASY LOADER FASANI IN-LINE FOR LASER LOADING/UNLOADING
FASANI
08216
MOD. CSS 3015
Removable strikers on the long and short side 3000-1500
Max load thickness 200 mm
Capacity 3000 Kg
Max sheet size mm 3000x1500
Total...
08216
MOD. CSS 3015
Removable strikers on the long and short side 3000-1500
Max load thickness 200 mm
Capacity 3000 Kg
Max sheet size mm 3000x1500
Total...
HOLEODINAMIC PRESS CAVENAGHI E RIDOLFI
CAVENAGHI E RIDOLFI
PRS.ODM.O249
MOD.CROPI 17O/1OOOX8OO
Max force Ton 170
blank holder force Ton 85
Forza estrattore sup. Ton 10
size table/slide mm 1000x800
max daylight...
PRS.ODM.O249
MOD.CROPI 17O/1OOOX8OO
Max force Ton 170
blank holder force Ton 85
Forza estrattore sup. Ton 10
size table/slide mm 1000x800
max daylight...
LATHE MERLI CLOVIS 410x2000
MERLI CLOVIS
07421
MOD. CLOVIS 28
Lenght mm 2000
Height of center mm 430
Turnng Diameter on bed mm 600
Bar capaciry mm 105
Bed Widht mm 450
Diamter qill mm...
07421
MOD. CLOVIS 28
Lenght mm 2000
Height of center mm 430
Turnng Diameter on bed mm 600
Bar capaciry mm 105
Bed Widht mm 450
Diamter qill mm...
LATHE PADOVANI LABOR 250 CNC
PADOVANI
06471
CNC SIEMENS SINUMERIK 810T
CAPACITY:
-Swing over bedo mm 560
-Max turning diameter on the chuck mm 560
-Max turning diameter between the center mm...
06471
CNC SIEMENS SINUMERIK 810T
CAPACITY:
-Swing over bedo mm 560
-Max turning diameter on the chuck mm 560
-Max turning diameter between the center mm...
LATHE YANG MOD. ML-300
YANG
09386
CNC FANUC 0-T
WORKING AREA:
Max rotating diameter on the bench mm 600
Max turning diameter mm 300
Max turning length mm 600
STROKES:
Z-axis strokes...
09386
CNC FANUC 0-T
WORKING AREA:
Max rotating diameter on the bench mm 600
Max turning diameter mm 300
Max turning length mm 600
STROKES:
Z-axis strokes...
MOULDING TEST REIS
REIS
09868
150 TONNELLATE
Removable lower plane
Tilting upper plane
Mold fixing plate 1500x1500 mm
USED MACHINE
09868
150 TONNELLATE
Removable lower plane
Tilting upper plane
Mold fixing plate 1500x1500 mm
USED MACHINE
MEASURING ZEISS MOD. O-INSPECT 322
ZEISS
09330
MACHINE TECHNICAL DATA
Useful measuring range:
X= 300mm, Y= 200mm, Z=200mm
Maximum Permitted Errors "MPE" (Max Permissible Error, according to...
09330
MACHINE TECHNICAL DATA
Useful measuring range:
X= 300mm, Y= 200mm, Z=200mm
Maximum Permitted Errors "MPE" (Max Permissible Error, according to...
GRINDING PREZIOSA MM.1500
PREZIOSA
New01616
MOD.220x1500
COMPLETE WITH ACCESSORIES
GRINDING WHEELS MM.750X250
MATR. NR.57/90
USED MACHINE
New01616
MOD.220x1500
COMPLETE WITH ACCESSORIES
GRINDING WHEELS MM.750X250
MATR. NR.57/90
USED MACHINE
GUILLOTINE SHEAR COMALL MOD. C15x3000
COMAL
08836
Cutting lenght mm 3000
Distance between center mm 3050
Gap mm 500
Max cutting thickness mm 15
Backgauge stroke mm 1000
Pump motor power kW...
08836
Cutting lenght mm 3000
Distance between center mm 3050
Gap mm 500
Max cutting thickness mm 15
Backgauge stroke mm 1000
Pump motor power kW...
LATHE MERLI CLOVIS 28
CLOVIS
09894
Height of centers mm 360
Distance between centers mm 1500
Bar passaging mm 105
Spindle speed rpm 21-1010
Spindle taper CAMLOCK 8
EQUIPPED...
09894
Height of centers mm 360
Distance between centers mm 1500
Bar passaging mm 105
Spindle speed rpm 21-1010
Spindle taper CAMLOCK 8
EQUIPPED...
LATHE POTISJE 300x3000
POTISJE
New04432
MOD. PA 30
VISUALIZED
HEIGHT CENTER MM.300
DISTANCE BETWEEN CENTER MM.3000
TURNING DIAMETER ON THE BED MM.610
TURNING DIAMETER ON THE CARRIGE...
New04432
MOD. PA 30
VISUALIZED
HEIGHT CENTER MM.300
DISTANCE BETWEEN CENTER MM.3000
TURNING DIAMETER ON THE BED MM.610
TURNING DIAMETER ON THE CARRIGE...
VERTICAL CENTER ZPS MCFV 100
ZPS
09297
CNC SELCA 3045
Table surface 1270x605 mm
Max table load Kg 900
Axis X 1024 mm
Axis Y 610 mm
Axis Z 635 mm
Spindle speed rpm 8000
Spindle taper ISO...
09297
CNC SELCA 3045
Table surface 1270x605 mm
Max table load Kg 900
Axis X 1024 mm
Axis Y 610 mm
Axis Z 635 mm
Spindle speed rpm 8000
Spindle taper ISO...
BORING MACHINE SUPER PROGRESS 580
HOLE- DRILLING CENTRE FAMUP
FAMUP
New02675
HOLE CAPACITY MM 30
DIAM ROTARY TABLE MM.700
TRASLATION MM.400
ISO 40
CNC FAGOR 8025T
USED MACHINE
New02675
HOLE CAPACITY MM 30
DIAM ROTARY TABLE MM.700
TRASLATION MM.400
ISO 40
CNC FAGOR 8025T
USED MACHINE
LATHE MERLI CLOVIS 28
MERLI CLOVIS
07076
FEATURES:
Height of center mm 320
Turning diameter on the bed mm 640
Turning diameter on the carriage mm 415
Turning diametr on the gap mm 920
Bed...
07076
FEATURES:
Height of center mm 320
Turning diameter on the bed mm 640
Turning diameter on the carriage mm 415
Turning diametr on the gap mm 920
Bed...
MILLING MOMAC MOD. FU1S
MOMAC
08178
TABLE:
Table dimensions mm 1200x250
T-slots number 3-14 H7
T-slots distance mm 63
STROKES:
Longitudinal automatic mm 900
Cross automatic mm...
08178
TABLE:
Table dimensions mm 1200x250
T-slots number 3-14 H7
T-slots distance mm 63
STROKES:
Longitudinal automatic mm 900
Cross automatic mm...
SHEAR GUILLOTINE GATTI MOD STM 3050x16/20
GATTI
GHI.OTT.O1O3
MAX CUTTING LENGHT: MM 3O5O
MAX THICKNESS MM 16/2O
MECHANICS WITH PISTONS
BLOCKING SHEET HYDRAULIC
MOTORIZED REGISTRY
NOTCH MM.500
USED MACHINE
GHI.OTT.O1O3
MAX CUTTING LENGHT: MM 3O5O
MAX THICKNESS MM 16/2O
MECHANICS WITH PISTONS
BLOCKING SHEET HYDRAULIC
MOTORIZED REGISTRY
NOTCH MM.500
USED MACHINE
.jpeg)
BORING CERUTI ABC 75
BORING CERUTI MOD. ABC 75
CERUTI
ALS.FIS.OO78
SIZE ROTARY TABLE MM.1100x850
AXIS MM.1400x1200x1100
SPEED RANGE 15 / 1500
COMPLETE WITH VERTICAL BIROTATING HEAD
CONE MORSE N. 5
TOT POWER. HP...
ALS.FIS.OO78
SIZE ROTARY TABLE MM.1100x850
AXIS MM.1400x1200x1100
SPEED RANGE 15 / 1500
COMPLETE WITH VERTICAL BIROTATING HEAD
CONE MORSE N. 5
TOT POWER. HP...
BORING SAN ROCCO MEC 4
SAN ROCCO
06744
BI-ROTARY HEAD
VISUALIZED
TABLE:
Rotary table dimensions mm 1200x1500
Longitudinal stroke mm 1600
Cross stoke mm 2100
Table load Kg...
06744
BI-ROTARY HEAD
VISUALIZED
TABLE:
Rotary table dimensions mm 1200x1500
Longitudinal stroke mm 1600
Cross stoke mm 2100
Table load Kg...
.jpeg)
CENTER DECKEL MAHO DMC 63
DECKEL MAHO
08774
CNC HEIDENHAIN TNC 426
STROKES:
X axis 630 mm
Y axis 500 mm
Z axis 500 mm
TABLE:
Table surface with T-slots DIN 650-14 mm 800x500
Max load on the...
08774
CNC HEIDENHAIN TNC 426
STROKES:
X axis 630 mm
Y axis 500 mm
Z axis 500 mm
TABLE:
Table surface with T-slots DIN 650-14 mm 800x500
Max load on the...
CENTER FAMUP MP 80 E
FAMUP
09661
CNC SELCA S3045PD
TABLE:
Table size mm 1000x520
T-slots n.5
T-slots width mm 18
Distance T-slots mm 100
Max load Kg 600
STROKES:
Longitudinal X axis...
09661
CNC SELCA S3045PD
TABLE:
Table size mm 1000x520
T-slots n.5
T-slots width mm 18
Distance T-slots mm 100
Max load Kg 600
STROKES:
Longitudinal X axis...
CENTER FEELER FV1000
FEELER
08607
CNC FANUC OM-D
TRAVELS:
Axis X mm 1000
Axis Y mm 450
Axis Z mm 505
TABLE:
Table dimensions mm 475x1100
Load max Kg 500
SPINDLE:
Spindle speed rpm...
08607
CNC FANUC OM-D
TRAVELS:
Axis X mm 1000
Axis Y mm 450
Axis Z mm 505
TABLE:
Table dimensions mm 475x1100
Load max Kg 500
SPINDLE:
Spindle speed rpm...
CENTER PARPAS MOD. P11A
PARPAS
09867
CNC FANUC 0MC
Axis X stroke 1100 mm
Axis Y stroke 550 mm
Axis Z stroke 600 mm
Spindle taper ISO 40
Spindle speed rpm 8000
Tool change 24...
09867
CNC FANUC 0MC
Axis X stroke 1100 mm
Axis Y stroke 550 mm
Axis Z stroke 600 mm
Spindle taper ISO 40
Spindle speed rpm 8000
Tool change 24...
EXTERNAL GRINDING CINCINNATI MT.2
CINCINNATI
RTF.EST.O178
STROKE MM.2000
HEIGHT OF CENTRE MM.300
DIAMETER GRINDING WHEEL MM.600
OVERALL SIZE: MM 5400X2700X H1600
USED MACHINE
RTF.EST.O178
STROKE MM.2000
HEIGHT OF CENTRE MM.300
DIAMETER GRINDING WHEEL MM.600
OVERALL SIZE: MM 5400X2700X H1600
USED MACHINE
GRINDING GANTRY WMW
WMW
New04386
AXIS X MM.7000
PASSAGE BETWEEN FRAMES MM.1650
TABLE MM.1100X5000
STROKE TRAVERSAL MM 1100
LIGHT MM 1200
GRINDING HEAD ORIENTABLE 5,5 HP CORSA 400...
New04386
AXIS X MM.7000
PASSAGE BETWEEN FRAMES MM.1650
TABLE MM.1100X5000
STROKE TRAVERSAL MM 1100
LIGHT MM 1200
GRINDING HEAD ORIENTABLE 5,5 HP CORSA 400...
.jpeg)
GRINDING MACHINE
09360
X axis travel 650 mm
Y axis travel 400 mm
Z axis travel 250 mm
Grinding surface 500x300 mm
Max distance between wheel center and table top mm...
X axis travel 650 mm
Y axis travel 400 mm
Z axis travel 250 mm
Grinding surface 500x300 mm
Max distance between wheel center and table top mm...
GRINDING MININI MOD. TH-PL 8.6
MININI
08639
Wheel dimensions mm 300x50
Axis X stroke mm 800
Axis Y stroke mm 600
Axis Z stroke mm 450
EQUIPPED WITH:
-Diamond dresser
USED MACHINE
08639
Wheel dimensions mm 300x50
Axis X stroke mm 800
Axis Y stroke mm 600
Axis Z stroke mm 450
EQUIPPED WITH:
-Diamond dresser
USED MACHINE
LATHE GILDEMEISTER CTX600
GILDEMEISTER
08067
CNC PHILIPS 432
Max swing diameter mm 650
Max turning diameter mm 480
Max turning lenght 1000 mm
Axis X mm 320
Axis Z mm 1097
Spindle bore mm...
08067
CNC PHILIPS 432
Max swing diameter mm 650
Max turning diameter mm 480
Max turning lenght 1000 mm
Axis X mm 320
Axis Z mm 1097
Spindle bore mm...
.jpeg)
LATHE OMG ZANOLETTI CNA 325
OMG ZANOLETTI
09621
CNC FAGOR 8055
Diameter on the carriage 430 mm
Distance between centers 1500
Bar passaging 105 mm
Spindle taper CAMLOCK 8''
EQUIPPED...
09621
CNC FAGOR 8055
Diameter on the carriage 430 mm
Distance between centers 1500
Bar passaging 105 mm
Spindle taper CAMLOCK 8''
EQUIPPED...
MEASURING MACHINE
RUPAC
09885
MOD. INSPECVISTA 3020A
X-axis travel mm 300
Y-axis travel mm 200
Z-axis travel mm 200
Type of swan neck structure
Structure composition...
09885
MOD. INSPECVISTA 3020A
X-axis travel mm 300
Y-axis travel mm 200
Z-axis travel mm 200
Type of swan neck structure
Structure composition...
MEASURING MACHINE MITUTOYO
MITUTOYO
09058
THREE-DIMENSIONAL MOD. EURO C-7106
Dimensions mm 700x600x1000
EQUIPPED WITH:
-RENISHAWPH10T MOTORIZED HEAD
-PC
USED MACHINE
09058
THREE-DIMENSIONAL MOD. EURO C-7106
Dimensions mm 700x600x1000
EQUIPPED WITH:
-RENISHAWPH10T MOTORIZED HEAD
-PC
USED MACHINE
MILLING AUERBACH FBE 1200
AVERBACH
09647
CNC SELCA 3045
TABLE:
Size 1300x600
T-slots 5
Widht T-slots mm 18H8
Distance T-slots mm 100
Laod 2.000 kg
STROKES:
X axis longitudinal 1200 mm
Y...
09647
CNC SELCA 3045
TABLE:
Size 1300x600
T-slots 5
Widht T-slots mm 18H8
Distance T-slots mm 100
Laod 2.000 kg
STROKES:
X axis longitudinal 1200 mm
Y...
MILLING OMV PARPAS FAS-2P
PARPAS
09207
CNC HEIDENHAIN 355Q
Longitudinal mm 920
Cross stroke mm 620
Vertical stroke mm 520
Manual tilting rotary table
Surface table mm
Dualspindle milling...
09207
CNC HEIDENHAIN 355Q
Longitudinal mm 920
Cross stroke mm 620
Vertical stroke mm 520
Manual tilting rotary table
Surface table mm
Dualspindle milling...
MILLING RAMBAUDI RAMMATIC
RAMBAUDI
07798
CNC FIDIA C1
AXIS STROKES
Axis X (longitudinal) mm 2030
Axis Y (cross) mm 800
Axis Z (vertical) mm 915
Quill stroke mm 150
TABLE
Lenght mm...
07798
CNC FIDIA C1
AXIS STROKES
Axis X (longitudinal) mm 2030
Axis Y (cross) mm 800
Axis Z (vertical) mm 915
Quill stroke mm 150
TABLE
Lenght mm...
PRESS BRAKE CNC GABELLA MOD. D40
PRESS DOUBLE COLUMN TRANSFER WEINGARTEN 8O TON
WEINGARTEN
NEW01311
ECCENTRIC
WORKING STATION NR.06
STROKE MM.120
STUFFING STROKE MM.42
USED MACHINE
NEW01311
ECCENTRIC
WORKING STATION NR.06
STROKE MM.120
STUFFING STROKE MM.42
USED MACHINE
PRESS ECCENTRIC MARCATI TON.200
MARCATI
NEW03376
C- TYPE
BED SIZE MM.1200x950
SIZE SLEDGE HAMMER MM.720x440
DAY LIGHT BED- SLEDGE HAMMER MM.600
USED MACHINE
NEW03376
C- TYPE
BED SIZE MM.1200x950
SIZE SLEDGE HAMMER MM.720x440
DAY LIGHT BED- SLEDGE HAMMER MM.600
USED MACHINE
SPARK ERODER ONA TECNO H600
ONA
09651
TABLE:
Tank size mm 1700x1000x600
Table dimensions mm 1200x800
Max table load Kg 4000
Max height piece mm 530
CROSS TABLE:
Longitudinal X stroke mm...
09651
TABLE:
Tank size mm 1700x1000x600
Table dimensions mm 1200x800
Max table load Kg 4000
Max height piece mm 530
CROSS TABLE:
Longitudinal X stroke mm...
MILLING BOMAC MOD. 858II
BOMAC
09796
TABLE AND STROKES:
Table dimensions 1370x305 mm
Manual longitudinal stroke 800 mm
Manual cross stroke 380 mm
Vertical shelf stroke 406 mm
HEAD AND...
09796
TABLE AND STROKES:
Table dimensions 1370x305 mm
Manual longitudinal stroke 800 mm
Manual cross stroke 380 mm
Vertical shelf stroke 406 mm
HEAD AND...
CAGLIO PRESS C-TYPE 120 TON
CAGLIO
07281
-Maximum pressure Ton 120
-Strokes per minute c.a. 55
-Adjustable ram stroke mm.20-120
-Table size: width x depth mm 900x600
-Ram size: width x depth...
07281
-Maximum pressure Ton 120
-Strokes per minute c.a. 55
-Adjustable ram stroke mm.20-120
-Table size: width x depth mm 900x600
-Ram size: width x depth...
CENTER HURCO VMX 30
HURCO
08921
CNC ULTIMAX
TABLE:
Table surface mm 1020x510
T-slots number 5
Widht/Distance T-slots mm 18/100
Load capacity Kg 1360
STROKES:
Axis X mm 760
Axis Y mm...
08921
CNC ULTIMAX
TABLE:
Table surface mm 1020x510
T-slots number 5
Widht/Distance T-slots mm 18/100
Load capacity Kg 1360
STROKES:
Axis X mm 760
Axis Y mm...
CENTER MIND DART
MIND
08814
MOD. VMC 1000 A - TWIN SPPED
CNC FANUC 18 MC
TABLE:
Working surface mm 1220x500
Max load Kg 1500
CORSE:
Axis X longitudinal stroke mm 1100
Axis Y...
08814
MOD. VMC 1000 A - TWIN SPPED
CNC FANUC 18 MC
TABLE:
Working surface mm 1220x500
Max load Kg 1500
CORSE:
Axis X longitudinal stroke mm 1100
Axis Y...
CENTER SAMSUNG MOD. LCV 50 A
SAMSUNG
06979
CNC MITSUBISHI
-Table working surface mm 1000x520
-Table T-slot (widthxIntrevalxn.) 18H8x110x5
-Axis X mm 800
-Axis Y mm 520
-Axis Z mm 500
-Distance...
06979
CNC MITSUBISHI
-Table working surface mm 1000x520
-Table T-slot (widthxIntrevalxn.) 18H8x110x5
-Axis X mm 800
-Axis Y mm 520
-Axis Z mm 500
-Distance...
CENTER ZPS MCFV 100
ZPS
09292
CNC HEIDENHAIN 415
Table surface 1270x605 mm
Table load Kg 900
X axis travel 1020 mm
Y axis travel 610 mm
Z axis travel 635 mm
Spindle speed rpm...
09292
CNC HEIDENHAIN 415
Table surface 1270x605 mm
Table load Kg 900
X axis travel 1020 mm
Y axis travel 610 mm
Z axis travel 635 mm
Spindle speed rpm...
GRINDING SURFACE FAVRETTO MOD. TC 250
FAVRETTO
New04132
MAX GRINDING LENGHT MM.2500
MAX GRINDING LENGHT WITH LARGE WHEEL 75 MM.575
MAX GRINDING HEIGHT MM.450
SIZE ELECTROPERMANENT MAGNETIC TABLE...
New04132
MAX GRINDING LENGHT MM.2500
MAX GRINDING LENGHT WITH LARGE WHEEL 75 MM.575
MAX GRINDING HEIGHT MM.450
SIZE ELECTROPERMANENT MAGNETIC TABLE...
GRINDING ZOCCA 2000/3
ZOCCA
07412
Height of center mm 180
Diameter max grinding mm 360
Distance between centre mm 2000
Head rotation +/-45 degrees
Spindle motor speed 2 ranges:...
07412
Height of center mm 180
Diameter max grinding mm 360
Distance between centre mm 2000
Head rotation +/-45 degrees
Spindle motor speed 2 ranges:...
LATHE AVM ANGELINI MOD. BRAVO
AVM ANGELINI
09680
CNC FANUC 21i
Height of centers 258 mm
Distance between centers 800 mm
Swing diameter on the bed 460 mm
Swing diameter on the slide 290 mm
Bench...
09680
CNC FANUC 21i
Height of centers 258 mm
Distance between centers 800 mm
Swing diameter on the bed 460 mm
Swing diameter on the slide 290 mm
Bench...
PRESS GIGANT GTP.11O TON.16O
GIGANT
PRS.OCG.OO42
PISTON: N°2 TON.160
RETURN POWER TON.20
MOVING PLANE OR PISTON STROKE (APPROX.) MM.500
MAX PRESSURE ATM 160
MOVING PLANE APPROACH SPEED M/1'...
PRS.OCG.OO42
PISTON: N°2 TON.160
RETURN POWER TON.20
MOVING PLANE OR PISTON STROKE (APPROX.) MM.500
MAX PRESSURE ATM 160
MOVING PLANE APPROACH SPEED M/1'...
SHEAR CMU SWING BEAM 6/32
CMU
09248
TILTING BLADE
Cutting thickness mm 6
Cutting lenght mm 3200
Cutting angle 1° 30'
Corsa registro mm 800
Motor power kw 7,5
Machine weight Kg 7200...
09248
TILTING BLADE
Cutting thickness mm 6
Cutting lenght mm 3200
Cutting angle 1° 30'
Corsa registro mm 800
Motor power kw 7,5
Machine weight Kg 7200...
LATHE BOMAC AUTRON LX SFC210
BOMAC
09876
SFC 210x1000
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
Height of center mm 210
Swing diameter on the bed mm 420
Swing diameter on the gap mm...
09876
SFC 210x1000
TECHNICAL AND CONSTRUCTION CHARACTERISTICS:
Height of center mm 210
Swing diameter on the bed mm 420
Swing diameter on the gap mm...
BORING PAMA MOD. AL 75
BORING TOS 63
TOS
ALS.FIS.OO18
TABLE TYPE
ATTACHMENT ISO 50
AXIS X mm 1200
AXIS Y mm 900
AXIS Z mm 800
COMPLETE WITH:
STIFFNESS COLUMN
USED MACHINE
ALS.FIS.OO18
TABLE TYPE
ATTACHMENT ISO 50
AXIS X mm 1200
AXIS Y mm 900
AXIS Z mm 800
COMPLETE WITH:
STIFFNESS COLUMN
USED MACHINE
CENTER BOMAC CFM 1100
BOMAC
09432
CNC HEIDENHAIN
TABLE:
Dimensions mm 1300x500
Max load Kg 900
T-slots N.5 mm 18x100
STROKES:
Axis X mm 1100
Axis Y mm 550
Axis Z mm 560
Max distance...
09432
CNC HEIDENHAIN
TABLE:
Dimensions mm 1300x500
Max load Kg 900
T-slots N.5 mm 18x100
STROKES:
Axis X mm 1100
Axis Y mm 550
Axis Z mm 560
Max distance...
CENTER DAEWOO MOD. ACE V35
DAEWOO
08890
ROTOPALLET
CNC FANUC OM
STROKES:
Axis X stroke mm 560
Axis Y stroke mm 400
Axis Z stroke mm 460
Distance between spindle nose to table surface mm...
08890
ROTOPALLET
CNC FANUC OM
STROKES:
Axis X stroke mm 560
Axis Y stroke mm 400
Axis Z stroke mm 460
Distance between spindle nose to table surface mm...
CENTER MAXIMART MOD. VMC850
MAXIMART
07122
CNC SIEMENS SINUMERIK
-Table size mm 1000x450
-T-slot mm 18x3
-Axix X travel mm 850
-Axis Y travel mm 500
-Axis Z travel mm 500
-Distance between...
07122
CNC SIEMENS SINUMERIK
-Table size mm 1000x450
-T-slot mm 18x3
-Axix X travel mm 850
-Axis Y travel mm 500
-Axis Z travel mm 500
-Distance between...
LATHE CMT SUPER URSUS 280
CMT
08555
CAPACITY:
Height of centre mm 280
Max diameter over bed mm 560
Max diameter over slide mm 305
Distance between centre mm 1500
AXIS:
Axis Z mm...
08555
CAPACITY:
Height of centre mm 280
Max diameter over bed mm 560
Max diameter over slide mm 305
Distance between centre mm 1500
AXIS:
Axis Z mm...
LATHE CNC PADOVANI MOD. LABOR 180
PADOVANI
New03985
CNC SIEMENS SINUMERIK 810 T
AXIS X MM.240
AXIS Z MM.1080
SWING OVER BED MM.360
SWING OVER CARRIAGE MM.260
DISTANCE BETWEEN CENTRE MM.1000
SPINDLE ...
New03985
CNC SIEMENS SINUMERIK 810 T
AXIS X MM.240
AXIS Z MM.1080
SWING OVER BED MM.360
SWING OVER CARRIAGE MM.260
DISTANCE BETWEEN CENTRE MM.1000
SPINDLE ...
.JPG)
LATHE GIANA 360x1800
GIANA
08959
HEIGHT OF CENTER ON BED MM 360
HEIGHT OF CENTER ON CARRIAGE MM 240
HEIGHT OF CENTER ON GAP MM 450
DISTANCE BETWEEN CENTER MM 1800
WIDTH BED MM...
08959
HEIGHT OF CENTER ON BED MM 360
HEIGHT OF CENTER ON CARRIAGE MM 240
HEIGHT OF CENTER ON GAP MM 450
DISTANCE BETWEEN CENTER MM 1800
WIDTH BED MM...
LATHE WALDEGG 550x1400
WALDEGG
07813
Height of center mm 550
Carriage stroke mm 850
Distance between center mm 3000
Turning lenght mm 1800
Turning diameter open bed mm 1700
Turning...
07813
Height of center mm 550
Carriage stroke mm 850
Distance between center mm 3000
Turning lenght mm 1800
Turning diameter open bed mm 1700
Turning...
LIFT DIESEL SIBICAR DS DA 30/40 Q-LI
MILLING BED TYPE WAGNER SERIES CINCH MILL 25
WAGNER CINCHMILL
New04301
CNC CTEK CNT803
Table surface mm.343x1524
Table stroke (axis X) mm.1280
carriage stroke (axis Y) mm.550
Stroke vertical head mm.600
T- guides (width...
New04301
CNC CTEK CNT803
Table surface mm.343x1524
Table stroke (axis X) mm.1280
carriage stroke (axis Y) mm.550
Stroke vertical head mm.600
T- guides (width...
MILLING CNC BED TYPE OMV PARPAS FAS-3
PARPAS
New02205
CNC ECS 2400
Working surface mm.1225x500
Rotary tilting table surface mm 1000x700
Axis X mm.900
Axis Y mm.550
Axis Z vertical mm.500...
New02205
CNC ECS 2400
Working surface mm.1225x500
Rotary tilting table surface mm 1000x700
Axis X mm.900
Axis Y mm.550
Axis Z vertical mm.500...
MILLING GEMI MOD. FU 1600
GEMI
09893
Table dimensions mm 1600x410
X-axis stroke mm 1400
Y-axis stroke mm 360
Z-axis stroke mm 500
Spindle taper ISO 50
Spindle rotation speed n.12 - rpm...
09893
Table dimensions mm 1600x410
X-axis stroke mm 1400
Y-axis stroke mm 360
Z-axis stroke mm 500
Spindle taper ISO 50
Spindle rotation speed n.12 - rpm...
PRESS BRAKE RIBOLDI MOD. H150.40
RIBOLDI
09322
TON. 150
Length 4050 mm
Gap 350 mm
Stroke mm 220
Approach speed mm/s 50
Working speed mm/s 6
Return speed mm/s 45
Motor power kw 11
Approximate...
09322
TON. 150
Length 4050 mm
Gap 350 mm
Stroke mm 220
Approach speed mm/s 50
Working speed mm/s 6
Return speed mm/s 45
Motor power kw 11
Approximate...
SAW BAND IMET MOD. X-TECH 320
IMET
08437
AUTOMATIC CNC
Round cutting capacity tondo mm 320
Square cutting capacity mm 320
Rectangle cutting capacity mm 320x320
Blade motor power kW 3
Blade...
08437
AUTOMATIC CNC
Round cutting capacity tondo mm 320
Square cutting capacity mm 320
Rectangle cutting capacity mm 320x320
Blade motor power kW 3
Blade...
STEADY REST FOR CONVENTIONAL LATHE
07228
Diameter maximum mm 1400
USED EQUIPMENT
Diameter maximum mm 1400
USED EQUIPMENT
VERTICAL MACHINE CENTRE EUMACH MC 800-P
EUMACH
New03255
table surface 500 X 1000 mm
max load on table: Kg. 500
Distance table/floor mm. 840.
axis X mm. 800
axis Y mm. 510
axis Z mm. 510+100
distance nose...
New03255
table surface 500 X 1000 mm
max load on table: Kg. 500
Distance table/floor mm. 840.
axis X mm. 800
axis Y mm. 510
axis Z mm. 510+100
distance nose...
BENDER PROFILE MACHINE ADRIA MACHINE
ADRIATICA INDUSTRIALE
09258
MOD. APK 61
Shaft diameter mm 60
Roller diameter mm 177
Speed m/min 6,4
Working voltage V 380-415
Frequency Hz 50
Engine kW 4
Machine dimensions...
09258
MOD. APK 61
Shaft diameter mm 60
Roller diameter mm 177
Speed m/min 6,4
Working voltage V 380-415
Frequency Hz 50
Engine kW 4
Machine dimensions...
LATHE CNC GRAZIANO MT 400C
GRAZIANO
08065
CNC Heidenhain 532T
WORKING RANGE:
Max swing diameter mm 430
Max turning diameter mm 300
Max diameter over slide mm 265
Distance centre mm...
08065
CNC Heidenhain 532T
WORKING RANGE:
Max swing diameter mm 430
Max turning diameter mm 300
Max diameter over slide mm 265
Distance centre mm...
PRESS OLEODYNAMIC OMF 250 TON.
WELDING POSITIONER
BENDING MACHINE BPR BA35 CNC
BPR
06926
A CNC
Shafts diameter 35 mm
Useful shaft length 60 mm
Driving rollers 3
Max insertion height 95 mm
Working height at the center of the trees 825...
06926
A CNC
Shafts diameter 35 mm
Useful shaft length 60 mm
Driving rollers 3
Max insertion height 95 mm
Working height at the center of the trees 825...
CESOIA TAGLIBILETTE FERRARIO
.JPG)
GRINDING TACCHELLA M-518 UA
TACCHELLA
07404
Grinding lenght 600 mm
Max grinding diameter mm 255
TABLE:
Max automatic stroke mm 600
Min. automatic stroke 4 mm
Max inclination of the drill axis...
07404
Grinding lenght 600 mm
Max grinding diameter mm 255
TABLE:
Max automatic stroke mm 600
Min. automatic stroke 4 mm
Max inclination of the drill axis...
LATHE CONVENTIONAL SAFOP 430x1500
SAFOP
New01503
MOD. PS-430
Height of center mm. 430
Max diameter swing over bed mm. 860
Max diameter swing over cross carriage mm. 720
Max diameter swing over gap...
New01503
MOD. PS-430
Height of center mm. 430
Max diameter swing over bed mm. 860
Max diameter swing over cross carriage mm. 720
Max diameter swing over gap...
MILLING CNC BED TYPE C.B. FERRARI MOD. P45 E
CB FERRARI
New01852
CNC ELEXA 132 V
AXIS X MM.1200
AXIS Y MM.370
AXIS Z MM.330
TABLE SIZE MM.1100x500
TOOL CHANGE N° 18 TOOLS
SPEED SPINDLE REVOLUTION/MIN 4000...
New01852
CNC ELEXA 132 V
AXIS X MM.1200
AXIS Y MM.370
AXIS Z MM.330
TABLE SIZE MM.1100x500
TOOL CHANGE N° 18 TOOLS
SPEED SPINDLE REVOLUTION/MIN 4000...
.jpeg)
MILLING RAMBAUDI MOD. MS3
RAMBAUDI
09523
Table dimensions 1300x300 mm
Longitudinal stroke 950 mm
Cross stroke 300 mm
Vertical stroke 445 mm
Ram stroke mm 550
Horizontal spindle - Taper ISO...
09523
Table dimensions 1300x300 mm
Longitudinal stroke 950 mm
Cross stroke 300 mm
Vertical stroke 445 mm
Ram stroke mm 550
Horizontal spindle - Taper ISO...
MOULDING TEST TCS 100 TON
TCS
08772
Closing force kN 1000
Opening force kN 400
Column diameter mm 120
Planes dimension mm 1000x1000
Upper plane rotation 110 degrees
Motor power kW...
08772
Closing force kN 1000
Opening force kN 400
Column diameter mm 120
Planes dimension mm 1000x1000
Upper plane rotation 110 degrees
Motor power kW...
POLLARD VERTICAL HONING MACHINE
PRESS BRAKE HACO MOD. PPM 30100
HACO
07634
Bed lenght 3000 mm
Force 100 Ton
Gap 250 mm
Equipped with:
Cnc kvara 2 axis Y - X
Photocells and protection
USED MACHINE
07634
Bed lenght 3000 mm
Force 100 Ton
Gap 250 mm
Equipped with:
Cnc kvara 2 axis Y - X
Photocells and protection
USED MACHINE
PRESS TERENZIO TON. 130
TERENZIO
PRS.OLE.O259
HOLEODINAMIC 4 COLUMNS
PRESSURE TON 13O
DIAM COLUMNS MM 12O
BED SIZE MM.700x360
DAYLIGHT MM.1000
USED MACHINE.
PRS.OLE.O259
HOLEODINAMIC 4 COLUMNS
PRESSURE TON 13O
DIAM COLUMNS MM 12O
BED SIZE MM.700x360
DAYLIGHT MM.1000
USED MACHINE.
RADIAL DRILLING stankoimport TIPO 2A576
STANKO
New02636
HOLE DIAMETER MM.80
TRAVEL MM.2000
SPINDLE TURNING 1200
HYDRAULIC BLOCKING
USED MACHINE
New02636
HOLE DIAMETER MM.80
TRAVEL MM.2000
SPINDLE TURNING 1200
HYDRAULIC BLOCKING
USED MACHINE
ANGULAR PLATE H1500
09618
dimensions mm 600xH1500
base dimensions mm 730x600
with T slots
Upper surface mm 380x600
USED EQUIPMENT
dimensions mm 600xH1500
base dimensions mm 730x600
with T slots
Upper surface mm 380x600
USED EQUIPMENT
.JPG)
BRA LOADER IEMCA
IEMCA
09402
MOD. MASTER 880/33 P
Round bar diameter min/max mm 8:80
Hexagonal bar diameter min/max mm 7:60
Max bar length mm 3300
Warehouse capacity:
-diam. mm...
09402
MOD. MASTER 880/33 P
Round bar diameter min/max mm 8:80
Hexagonal bar diameter min/max mm 7:60
Max bar length mm 3300
Warehouse capacity:
-diam. mm...
DISTANCE BETWEEN CENTER MM 2000
TOVAGLIERI
07417
HEGHT OF CENTER ON BAD MM 250
HEIGHT OF CENTER ON CARRIAGE MM 150
CAMLOOK
BARR CAPACITY MM 80
QUILL TAILSTOCK MM 80
QUILL STROKE MM 150
WITH...
07417
HEGHT OF CENTER ON BAD MM 250
HEIGHT OF CENTER ON CARRIAGE MM 150
CAMLOOK
BARR CAPACITY MM 80
QUILL TAILSTOCK MM 80
QUILL STROKE MM 150
WITH...
DRILLING BERGONZI
BERGONZI
09038
MOD. HYDROBLOC TR40-1250H
Drilling capacity mm 40
Arm lenght mm 1250
Weight Kg 1850
EQUIPPED WITH:
-Tilting cube
USED MACHINE
09038
MOD. HYDROBLOC TR40-1250H
Drilling capacity mm 40
Arm lenght mm 1250
Weight Kg 1850
EQUIPPED WITH:
-Tilting cube
USED MACHINE
GRINDING GEAR NILES
NILES
RTF.SCE.O169
Min. grinding diameter mm 50
Max grinding diameter mm 500
Module min/max 2-10
Max teeth for cylinders width mm 150
Max cross teeth 25°
Max grinding...
RTF.SCE.O169
Min. grinding diameter mm 50
Max grinding diameter mm 500
Module min/max 2-10
Max teeth for cylinders width mm 150
Max cross teeth 25°
Max grinding...
GRINDING LIZZINI MOD. RUL 80 904
LIZZINI RUL
New02778
DIAM. GRINDING WHEEL: mm 500
WIDHT GRINDING WHEEL: mm 135
HEIGHT OF CENTRE: mm 150
DISTANCE BETWEEN CENTRE: mm 800
with:
-measuring system...
New02778
DIAM. GRINDING WHEEL: mm 500
WIDHT GRINDING WHEEL: mm 135
HEIGHT OF CENTRE: mm 150
DISTANCE BETWEEN CENTRE: mm 800
with:
-measuring system...
GRINDING MECLOR RT 1000
MECLOR
07268
Travel axis:
X mm 1000
Y mm 500
Z mm 600
EQUIPPED WITH:
wheel mm 280 x 48
Magnetic chuck mm 800 x 300
USED MACHINE
07268
Travel axis:
X mm 1000
Y mm 500
Z mm 600
EQUIPPED WITH:
wheel mm 280 x 48
Magnetic chuck mm 800 x 300
USED MACHINE
LATHE CNC BENELLI MOD. TF 100
BENELLI
New04920
CNC SIEMENS 810 T
WORKING AREA:
-SWING OVER BED MM.480
-SWING OVER CARRIAGE MM.400
-MAX SWING DIAMETER MM.260
-TURNING LENGHT...
New04920
CNC SIEMENS 810 T
WORKING AREA:
-SWING OVER BED MM.480
-SWING OVER CARRIAGE MM.400
-MAX SWING DIAMETER MM.260
-TURNING LENGHT...
LATHE GRAZIANO SAG 20 260x2500
GRAZIANO
08903
Height of center on the bed mm 260
Height of center in the gap mm 330
Distance between center mm 2500
Spindle bore mm 52
Approx. overall dimensions...
08903
Height of center on the bed mm 260
Height of center in the gap mm 330
Distance between center mm 2500
Spindle bore mm 52
Approx. overall dimensions...
.jpeg)
LATHE OMG ZANOLETTI 210x1500
OMG ZANOLETTI
09527
Height center mm 210
Turning diameter over bed mm 420
Turning diameter over carriage mm 260
Distance between centers mm 1500
Bench width mm 350...
09527
Height center mm 210
Turning diameter over bed mm 420
Turning diameter over carriage mm 260
Distance between centers mm 1500
Bench width mm 350...
LATHE OMG ZANOLETTI 250x1500
OMG ZANOLETTI
09851
Height of centers 250 mm
Distance between centers 1500 mm
Turning diameter on the bench 500 mm
Turnable diameter in the gap 700 mm
Turning diameter...
09851
Height of centers 250 mm
Distance between centers 1500 mm
Turning diameter on the bench 500 mm
Turnable diameter in the gap 700 mm
Turning diameter...
MEASURING ARM FARO
FARO
09296
EDGE CAM2
7 AXIS
PERFORMANCE SPECIFICATIONS:
Measuring range m 2,7
Volumetric accuracy mm +/- 0,041
Single point repeatability mm 0,029
FaroArm...
09296
EDGE CAM2
7 AXIS
PERFORMANCE SPECIFICATIONS:
Measuring range m 2,7
Volumetric accuracy mm +/- 0,041
Single point repeatability mm 0,029
FaroArm...
MILLING CNC DECKEL FP4-60T
DECKEL
New05574
BED TYPE
CNC DIALOG 12
- axis stroke mm 600x500x450
- table size mm 530x900
- Spindle taper ISO40
- Spindle motor kw 7,5
- Tool change 24...
New05574
BED TYPE
CNC DIALOG 12
- axis stroke mm 600x500x450
- table size mm 530x900
- Spindle taper ISO40
- Spindle motor kw 7,5
- Tool change 24...
MILLING CNC UNIVERSAL RIGIVA MOD.RS.1OO
RIGIVA
FRS.BSF.O373
EQUIPED WITH:
VERTICAL HEAD
HEAD FOR HOLE
ROTARY TABLE
CONTROL WITH PULPIT HAND-WHEEL
VISUALIZED OLIVETTI
STROKES : X800-Y500-Z600
SPINDLE...
FRS.BSF.O373
EQUIPED WITH:
VERTICAL HEAD
HEAD FOR HOLE
ROTARY TABLE
CONTROL WITH PULPIT HAND-WHEEL
VISUALIZED OLIVETTI
STROKES : X800-Y500-Z600
SPINDLE...
MILLING LAGUN MOD. FTV-4
LAGUN
06846
VISUALIZED
TABLE MM.1372x280
T-SLOTS N. 3
LONGITUDINAL TRAVEL X MM 800
CROSS TRAVEL Y MM 345
VERTICAL TRAVEL Z MM 400
RAM TRAVEL MM.570
SPINDLE TAPER...
06846
VISUALIZED
TABLE MM.1372x280
T-SLOTS N. 3
LONGITUDINAL TRAVEL X MM 800
CROSS TRAVEL Y MM 345
VERTICAL TRAVEL Z MM 400
RAM TRAVEL MM.570
SPINDLE TAPER...
PRESS ADIRA MOD.QHS-02012 CBP
ADIRA
09318
Maximum capacity kN 200
Max working length mm 1250
Max working thickness mm 4
Max tool length mm 1250
Passage between uprights mm 1020
Min/max stroke...
09318
Maximum capacity kN 200
Max working length mm 1250
Max working thickness mm 4
Max tool length mm 1250
Passage between uprights mm 1020
Min/max stroke...
PRESS BRAKE OMAG MOD. PHB 8056
OMAG
New04901
MM.6150x80 TON.
CNC SINTESI
Force 800 KN
Lenght 6150 mm
Distance between frames 5600 mm
Hollow 300 mm
Piston stroke 230 mm
Distance table - piston...
New04901
MM.6150x80 TON.
CNC SINTESI
Force 800 KN
Lenght 6150 mm
Distance between frames 5600 mm
Hollow 300 mm
Piston stroke 230 mm
Distance table - piston...
PRESS RISPO 15O TON
RISPO
PRS.EDM.O1O8
Bed size 1000x1000 mm
Size sledge hammer 1000x700 mm
Day light bed- sledge hammer 650 mm
Lateral opening mm 300
USED MACHINE
PRS.EDM.O1O8
Bed size 1000x1000 mm
Size sledge hammer 1000x700 mm
Day light bed- sledge hammer 650 mm
Lateral opening mm 300
USED MACHINE
SHARPENING NESI GRINDER 400S
NESI
09214
UNIVERSAL
LONGITUDINAL TABLE:
Stroke 400 mm
Work table length 800 mm
Work table width mm 105
Workpiece table rotation 360 degree
GRINDING...
09214
UNIVERSAL
LONGITUDINAL TABLE:
Stroke 400 mm
Work table length 800 mm
Work table width mm 105
Workpiece table rotation 360 degree
GRINDING...
SPARK ERODER ONA DATIC D360
ONA
09653
TABLE:
Tank size mm 1200x800x380
Table dimensions mm 650x400
Max table load Kg 1100
CROSS TABLE:
Longitudinal X stroke mm 600
Cross Y stroke mm...
09653
TABLE:
Tank size mm 1200x800x380
Table dimensions mm 650x400
Max table load Kg 1100
CROSS TABLE:
Longitudinal X stroke mm 600
Cross Y stroke mm...
.JPG)
BED TYPE MILLING SACHMAN Mod: S80
SACHMAN
09686
TABLE mm 1350 X 550
STROKE LONGITUDINAL mm 1200
STROKE TRASVERSAL mm 600
STROKE VERTICAL mm 650
STROKE QUILL mm 160
HEAD ROTATION +- 45...
09686
TABLE mm 1350 X 550
STROKE LONGITUDINAL mm 1200
STROKE TRASVERSAL mm 600
STROKE VERTICAL mm 650
STROKE QUILL mm 160
HEAD ROTATION +- 45...
BORING CERUTI MOD. B75/125
CERUTI
New04663
SPINDLE:
-SPINDLE DIAM FOR BORING MM.75
-SPINDLE DIAM FOR MILLING MM.125
- MM.500
-CM N.5
-MAX HEIGHT SPINDLE AXIS ON TABLE MM.900
-SPEED ROTATION...
New04663
SPINDLE:
-SPINDLE DIAM FOR BORING MM.75
-SPINDLE DIAM FOR MILLING MM.125
- MM.500
-CM N.5
-MAX HEIGHT SPINDLE AXIS ON TABLE MM.900
-SPEED ROTATION...
CENTER CHIRON FZ18W
CHIRON
08881
CNC Siemens SINUMERIK 810M
N.2 pallet
Clamping surface mm 950x370
Max table load Kg 500
Axis X stroke mm 550
Axis Y stroke mm 300
Axis Z stroke mm...
08881
CNC Siemens SINUMERIK 810M
N.2 pallet
Clamping surface mm 950x370
Max table load Kg 500
Axis X stroke mm 550
Axis Y stroke mm 300
Axis Z stroke mm...
.JPG)
CENTER FEELER FV 600
FEELER
09684
TABLE:
Table size mm 400x800
T-slots mm 18x3x100
Table load capacity Kg 300
AXIS:
X axis mm 610
Y axis mm 500
Z axis mm 505
Distance spindle...
09684
TABLE:
Table size mm 400x800
T-slots mm 18x3x100
Table load capacity Kg 300
AXIS:
X axis mm 610
Y axis mm 500
Z axis mm 505
Distance spindle...
CHAMFERING MACHINE BENELLI MOD. T-1
BENELLI
New04921
CNC FANUC -POWER MATE
SPINDLE DIAM. 300 MM
LENGHT MAX 300 MM
SPINDLE HOLE 50 MM
WEIGHT 3000 KG
USED MACHINE
New04921
CNC FANUC -POWER MATE
SPINDLE DIAM. 300 MM
LENGHT MAX 300 MM
SPINDLE HOLE 50 MM
WEIGHT 3000 KG
USED MACHINE
CUTTING BILLET WMW D.100
WMW
TRO.LAM.OO5O
MAXIMUM CUTTING FORCE TON 315
SQUARE CUTTING MM 100
ROUND CUTTING MM 106
BLADE LENGHT MM 380
STROKES PER MINUTE 30/MIN
LIFT HEIGHT MM 70
MATERIAL...
TRO.LAM.OO5O
MAXIMUM CUTTING FORCE TON 315
SQUARE CUTTING MM 100
ROUND CUTTING MM 106
BLADE LENGHT MM 380
STROKES PER MINUTE 30/MIN
LIFT HEIGHT MM 70
MATERIAL...
EROSION SPARK AGIE TRON 3U
LATHE NILES 500x3700
NILES
06316
MOD. DLZ 1000/III
Height of center mm.500
Max diameter swing over bed mm.1000
Max diameter swing over cross carriage mm.600
Max diameter swing over...
06316
MOD. DLZ 1000/III
Height of center mm.500
Max diameter swing over bed mm.1000
Max diameter swing over cross carriage mm.600
Max diameter swing over...
LATHE PASQUINO PFN 400x7000
PASQUINO
07384
Center height mm 410
Turning diameter on the bed mm 825
Turning diameter on the gap mm 860
Turning diameter in the gap mm 1100
Turning diameter on...
07384
Center height mm 410
Turning diameter on the bed mm 825
Turning diameter on the gap mm 860
Turning diameter in the gap mm 1100
Turning diameter on...
LATHE TRAUB MOD. TND400
TRAUB
09836
LIVE TOOLS
CNC TRAUB SYSTEM TX 8F
Turning length 800 mm
Turning diameter over bed 480 mm
Turning diameter over cross slide 240 mm
Bar passaging 65...
09836
LIVE TOOLS
CNC TRAUB SYSTEM TX 8F
Turning length 800 mm
Turning diameter over bed 480 mm
Turning diameter over cross slide 240 mm
Bar passaging 65...
MILLING KONDIA MOD. K-76
KONDIA
New02734
NUMERIC CONTROL HEIDENHAIN TNC 150
AXIS X MM.600
AXIS Y MM.350
QUILL VERTICAL AXIS Z MM.125
MAX WORKPIECE WEIGHT 225 KG.
TABLE SIZE MM....
New02734
NUMERIC CONTROL HEIDENHAIN TNC 150
AXIS X MM.600
AXIS Y MM.350
QUILL VERTICAL AXIS Z MM.125
MAX WORKPIECE WEIGHT 225 KG.
TABLE SIZE MM....
MILLING SECMU MOD. FBF 5PE / C-6M
SECMU
New04514
BED TYPE
CNC HEIDENHAIN 360C
TABLE SIZE MM.680X2000
NO. AND SIZE T-SLOT 5-18
AXIS X MM.2200
AXIS Y MM.1000
AXIS Z MM.1200
SPINDLE NOSE NO. 50
ENGINE...
New04514
BED TYPE
CNC HEIDENHAIN 360C
TABLE SIZE MM.680X2000
NO. AND SIZE T-SLOT 5-18
AXIS X MM.2200
AXIS Y MM.1000
AXIS Z MM.1200
SPINDLE NOSE NO. 50
ENGINE...
MOULDING TEST TCS 30 TON.
TCS
08734
Power 30 ton.
Removable lower plane mm 950x700
Tilting upper plane mm 1020x700
USED MACHINE
08734
Power 30 ton.
Removable lower plane mm 950x700
Tilting upper plane mm 1020x700
USED MACHINE
PRESS BRAKE WARCOM MOD. PI 25-40
WARCOM
07638
Force Ton 40
Bed lenght mm 2550
Distance between frames mm 2050
Throat depth mm 500
Ram stroke mm 95
Distance between table/piston mm 230
Motor...
07638
Force Ton 40
Bed lenght mm 2550
Distance between frames mm 2050
Throat depth mm 500
Ram stroke mm 95
Distance between table/piston mm 230
Motor...
ROTARY TABLE MM 1100
09858
Surface diameter mm 1100
With T slots
With motor and cables
USED EQUIPMENT
Surface diameter mm 1100
With T slots
With motor and cables
USED EQUIPMENT
.jpeg)
DRILLING BERGONZI MOD. TR40/1250
BERGONZI
09215
Max drilling on cast iron 50 mm
Max drilling on steel 40 mm
Thread capacity 40 mm
Fine thread capacity 50 mm
Arm mm 1250
Arm stroke 600 mm
Head...
09215
Max drilling on cast iron 50 mm
Max drilling on steel 40 mm
Thread capacity 40 mm
Fine thread capacity 50 mm
Arm mm 1250
Arm stroke 600 mm
Head...
LATHE POTISJE 300x2000
POTISJE
07387
MOD. PA3
Center height 300 mm
Distance between centers 2000 mm
Swing diameter over bed 610 mm
Swing diameter over carriage 400 mm
Diameter in the...
07387
MOD. PA3
Center height 300 mm
Distance between centers 2000 mm
Swing diameter over bed 610 mm
Swing diameter over carriage 400 mm
Diameter in the...
.jpg)
SHEAR COLGAR MOD. C.405
COLGAR
09323
Cutting lenght mm 4050
Blade lenght mm 4150
Freedistance between columns mm 4150
Gap in columns mm 500
Cutting capacity with sheet metal R=42 Kp/mmq...
09323
Cutting lenght mm 4050
Blade lenght mm 4150
Freedistance between columns mm 4150
Gap in columns mm 500
Cutting capacity with sheet metal R=42 Kp/mmq...
COMPRESSOR CECCATO CSM 15 AK
CECCATO
09264
FIXED SPEED
BELT DRIVE
Motor Power HP/KW 15/11
Pressure Bar 10
FAD:
-l/min 1416
-m3/h 85
Noise level db(A) 69
Gas 3/4''
Approx. compressor weight Kg...
09264
FIXED SPEED
BELT DRIVE
Motor Power HP/KW 15/11
Pressure Bar 10
FAD:
-l/min 1416
-m3/h 85
Noise level db(A) 69
Gas 3/4''
Approx. compressor weight Kg...
BAR LOADER LNS
09850
HYDROBAR SPRINT S2
Bar diameter mm 10-80
Bar lenght mm 3300
USED MACHINE
HYDROBAR SPRINT S2
Bar diameter mm 10-80
Bar lenght mm 3300
USED MACHINE
BORING CONTI
CONTI
ALS.MOB.OOO3
FLOOR TYPE
DIAMETER SPINDLE: mm 100
AXIS:
Z: mm 1100
X: mm 2000
W: mm 850
EQUIPED:
- FACING HEAD
- FLOOR PLATE DIMENTION MM 2000 X 2500 MM
- ROTARY...
ALS.MOB.OOO3
FLOOR TYPE
DIAMETER SPINDLE: mm 100
AXIS:
Z: mm 1100
X: mm 2000
W: mm 850
EQUIPED:
- FACING HEAD
- FLOOR PLATE DIMENTION MM 2000 X 2500 MM
- ROTARY...
CHAMFERING MACHINE SERTOM MOD. C25
SERTOM
08896
Max sheet metal resistance Kg/mm2 40/60
Max chamfer length 25 mm
Max sheet metal thickness mm 65
Min. width piece mm 60
Min. length piece mm...
08896
Max sheet metal resistance Kg/mm2 40/60
Max chamfer length 25 mm
Max sheet metal thickness mm 65
Min. width piece mm 60
Min. length piece mm...
COMPRESSOR ATLAS COPCO GA45
DEEP HOLE DRILLING FAMAS
FAMAS
FOR.ORZ.OO32
AXIS X MM.500
TAPER ISO 50
HEIGHT OF CENTRE MM.400
WITHOUT ELECTRIC SYSTEM
USED MACHINE
FOR.ORZ.OO32
AXIS X MM.500
TAPER ISO 50
HEIGHT OF CENTRE MM.400
WITHOUT ELECTRIC SYSTEM
USED MACHINE
DRILLING BERARDI VB 4 28
BERARDI
TRP.MTE.OO18
Hole capacity max mm 28
N.12 hole
Surface dimensions mm 1100x850
Spindle taper CM 3
Spindle speed n.12 Rpm 75-1060
Max interaxis mm 700
USED...
TRP.MTE.OO18
Hole capacity max mm 28
N.12 hole
Surface dimensions mm 1100x850
Spindle taper CM 3
Spindle speed n.12 Rpm 75-1060
Max interaxis mm 700
USED...
DRILLING SERRMAC TCS
SERRMAC
09659
WITH PRISMATIC GUIDES
Drilling capacity on steel diameter mm 40
Drilling capacity on cast iron diameter mm 50
Spindle attachment CM 4
Spindle stroke...
09659
WITH PRISMATIC GUIDES
Drilling capacity on steel diameter mm 40
Drilling capacity on cast iron diameter mm 50
Spindle attachment CM 4
Spindle stroke...
ECCENTRIC PRESS RUSSIAN TON.100
New02624
TECHNICAL CHARACTERISTICS
-Capacity Ton. 100
-stroke mm.25-130
-strokes/min N. 90
-Min distance between bed and slide mm.100
-Max distance between...
TECHNICAL CHARACTERISTICS
-Capacity Ton. 100
-stroke mm.25-130
-strokes/min N. 90
-Min distance between bed and slide mm.100
-Max distance between...
FACING HEAD TOS LD 650
08254
FOR BORING TOS VARNSDORF WH 10 / WH 105 / WHN 13 / WHN 110 WHN 130
USED EQUIPMENT
FOR BORING TOS VARNSDORF WH 10 / WH 105 / WHN 13 / WHN 110 WHN 130
USED EQUIPMENT
FORACORD 350 TON 4 HEADS
New03727
Base mm.1150x1150
Jaws mm.310x185
USED MACHINE
Base mm.1150x1150
Jaws mm.310x185
USED MACHINE
GENERATOR CURRENT SPARK
GRINDING KIKINDA
KIKINDA
07301
Axis X mm 600
Axis Y mm 250
Axis Z mm 550
Wheel size mm 260x50
Magnetic table mm 600x240
USED MACHINE
07301
Axis X mm 600
Axis Y mm 250
Axis Z mm 550
Wheel size mm 260x50
Magnetic table mm 600x240
USED MACHINE
GRINDING SURFACE ALPA MOD. RVA 800
ALPA
06232
Stokes mm 800x280
Sector wheel
Wheel diameter mm 280
Equipped with:
Electromagnetic table mm 800x280
USED MACHINE
06232
Stokes mm 800x280
Sector wheel
Wheel diameter mm 280
Equipped with:
Electromagnetic table mm 800x280
USED MACHINE
.JPG)
GRINDING TACCHELLA 1015 UA
TACCHELLA
07445
Grinding lenght mm 750
Max grinding diameter mm 305
TABLE:
Max automatic stroke mm 750
Min. automatic stroke mm 3
Max inclination of the drill axis...
07445
Grinding lenght mm 750
Max grinding diameter mm 305
TABLE:
Max automatic stroke mm 750
Min. automatic stroke mm 3
Max inclination of the drill axis...
HOLE-DRILLING FAMUP MOD. TP 700 T
FAMUP
05762
WITH ROTARY TABLE
TECHNICAL FEATURES:
-DRILLING ON STEEL MM.40
-TAPPING ON STEEL MM.30
-SPINDLE TAPER ISO 40
-DIAMETER QUILL MM.105
MACHINING...
05762
WITH ROTARY TABLE
TECHNICAL FEATURES:
-DRILLING ON STEEL MM.40
-TAPPING ON STEEL MM.30
-SPINDLE TAPER ISO 40
-DIAMETER QUILL MM.105
MACHINING...
.jpeg)
Hydraulic Press Gatti PG 150
GATTI
08981
150 ton
Piano mm 600x540
Corsa mm 500/550
Luce mm 700
Spessore piani mm 150
Interasse colonne mm 560 x 370
Diametro pistone mm 300
Diametro...
08981
150 ton
Piano mm 600x540
Corsa mm 500/550
Luce mm 700
Spessore piani mm 150
Interasse colonne mm 560 x 370
Diametro pistone mm 300
Diametro...
.jpeg)
Hydraulic Press Gatti PG 150
GATTI
08982
150 ton
Piano mm 600x540
Corsa mm 500/550
Luce mm 700
Spessore piani mm 150
Interasse colonne mm 560 x 370
Diametro pistone mm 300
Diametro...
08982
150 ton
Piano mm 600x540
Corsa mm 500/550
Luce mm 700
Spessore piani mm 150
Interasse colonne mm 560 x 370
Diametro pistone mm 300
Diametro...
Hydraulic Press Gatti PG 150
GATTI
08983
150 ton
Piano mm 600x540
Corsa mm 500/550
Luce mm 700
Spessore piani mm 150
Interasse colonne mm 560 x 370
Diametro pistone mm 300
Diametro...
08983
150 ton
Piano mm 600x540
Corsa mm 500/550
Luce mm 700
Spessore piani mm 150
Interasse colonne mm 560 x 370
Diametro pistone mm 300
Diametro...
Hydraulic Press Gatti PG 150
GATTI
08984
150 ton
Piano mm 600x540
Corsa mm 500/550
Luce mm 700
Spessore piani mm 150
Interasse colonne mm 560 x 370
Diametro pistone mm 300
Diametro...
08984
150 ton
Piano mm 600x540
Corsa mm 500/550
Luce mm 700
Spessore piani mm 150
Interasse colonne mm 560 x 370
Diametro pistone mm 300
Diametro...
INTERNAL GRINDING NOVARESE
LATHE BULCOM 200 x 1000
BULCOM
09669
MOD. CASTOR 205VSX1000
Distance between tips mm 1000
Tips height mm 205
Rotating diameter on the table mm 410
Spindle bore mm 55
EQUIPPED...
09669
MOD. CASTOR 205VSX1000
Distance between tips mm 1000
Tips height mm 205
Rotating diameter on the table mm 410
Spindle bore mm 55
EQUIPPED...
.jpeg)
LATHE GIANA GF 700 CNC x 1000
GIANA
09611
CNC Siemens SINUMERIK 810 T
CAPACITY:
Height of centers 350 mm
Max turning diameter on the bench 700 mm
Max turning diameter on the carriage 300 mm...
09611
CNC Siemens SINUMERIK 810 T
CAPACITY:
Height of centers 350 mm
Max turning diameter on the bench 700 mm
Max turning diameter on the carriage 300 mm...
LATHE GIOVANNI BREDA 305x3000
BREDA
08075
MOD. BRP 300
TECHNICAL DETAILS:
Height centre mm 305
Turning diameter over bed mm 610
Turning diameter over carriage mm 410
Turning diameter in gap...
08075
MOD. BRP 300
TECHNICAL DETAILS:
Height centre mm 305
Turning diameter over bed mm 610
Turning diameter over carriage mm 410
Turning diameter in gap...
LATHE GRAZIANO 210x1000
GRAZIANO
08071
MOD. GR200W
Height of center mm 210
Distance between center mm 1000
Siwing diameter over the carriage mm 268
Swing diameter over the gap mm...
08071
MOD. GR200W
Height of center mm 210
Distance between center mm 1000
Siwing diameter over the carriage mm 268
Swing diameter over the gap mm...
LATHE LABOR MOD. 255x2000
PADOVANI
09018
Height of center mm 255
Distance between centers mm 2000
Spindle bore mm 105
Turning diameter on the carriage mm 330
EQUIPPED WITH:
-Chuck D.G. Pinto...
09018
Height of center mm 255
Distance between centers mm 2000
Spindle bore mm 105
Turning diameter on the carriage mm 330
EQUIPPED WITH:
-Chuck D.G. Pinto...
LATHE OMG ZANOLETTI 250x1500
OMG ZANOLETTI
09327
Center height mm 250
Turning diameter on the bed mm 500
Rotary diameter on the gap mm 680
Turning diameter on the transversal carriage mm 300
Bed...
09327
Center height mm 250
Turning diameter on the bed mm 500
Rotary diameter on the gap mm 680
Turning diameter on the transversal carriage mm 300
Bed...
LATHE ZMM MOD. SU 582
ZBS
09892
Height of centers mm 285
Distance between centers mm 2000
Swing diameter on the bed mm 580
Swing diameter on the cross slide mm 380
Bed width mm...
09892
Height of centers mm 285
Distance between centers mm 2000
Swing diameter on the bed mm 580
Swing diameter on the cross slide mm 380
Bed width mm...
MILLING ARNO 20
ARNO
New05545
Table dimensions mm 1250x270
Axis X mm.800
Axis Y mm.250
Axis Z mm.400
SPINDLE
spindle nose ISO 40
n.12 spindle speed 40-1250 rpm
Equipped...
New05545
Table dimensions mm 1250x270
Axis X mm.800
Axis Y mm.250
Axis Z mm.400
SPINDLE
spindle nose ISO 40
n.12 spindle speed 40-1250 rpm
Equipped...
MILLING ARNO 20
ARNO
06328
TABLE
Table size mm 1250x270
STROKE
Longitudinal mm 900
Cross mm 290
Vertical mm 400
SPINDLE
Spindle taper ISO N.4
Spindle speed N.12 - rpm 40:1725...
06328
TABLE
Table size mm 1250x270
STROKE
Longitudinal mm 900
Cross mm 290
Vertical mm 400
SPINDLE
Spindle taper ISO N.4
Spindle speed N.12 - rpm 40:1725...
MILLING ARNO NOMO MOD. F20
ARNO
08193
DRO 3 AXIS
Table dimensions mm 1300x270
Axs X stroke mm 900
Axis Y stroke mm 300
Axis Z stroke mm 400
Spindle speed n.12 / rpm 40-1725
Spindle taper...
08193
DRO 3 AXIS
Table dimensions mm 1300x270
Axs X stroke mm 900
Axis Y stroke mm 300
Axis Z stroke mm 400
Spindle speed n.12 / rpm 40-1725
Spindle taper...
MILLING CMB NR.2
CMB
08829
Table dimensions mm 1200x290
Axis X stroke mm 900
Axis Y stroke mm 300
Axis Z stroke mm 500
Spindle taper ISO 40
n.12 spindle speed rpm 30-1500
Ram...
08829
Table dimensions mm 1200x290
Axis X stroke mm 900
Axis Y stroke mm 300
Axis Z stroke mm 500
Spindle taper ISO 40
n.12 spindle speed rpm 30-1500
Ram...
MILLING CORREA CM 55
CORREA
07265
STROKE AXIS:
X mm 1100
Y mm 400
Z mm 550
n. 12 Spindle speed 40 - 1800
EQUIPPED WITH:
Digital readout 3 axis
Horizontal spindle
USED MACHINE
07265
STROKE AXIS:
X mm 1100
Y mm 400
Z mm 550
n. 12 Spindle speed 40 - 1800
EQUIPPED WITH:
Digital readout 3 axis
Horizontal spindle
USED MACHINE
MILLING MIKRON WF21C
MIKRON
New03198
CNC HEIDENHAIN 155
TABLE SIZE MM 800x450
AXIS X MM 600
AXIS Y MM 400
AXIS Z MM 400
SPINDLE TAPER ISO 40
USED MACHINE
New03198
CNC HEIDENHAIN 155
TABLE SIZE MM 800x450
AXIS X MM 600
AXIS Y MM 400
AXIS Z MM 400
SPINDLE TAPER ISO 40
USED MACHINE
MILLING NOVAR NR.2
NOVAR
09408
UNIVERSALE
Strokes mm 1000x300x400
Spindle speed rpm 54:1500
EQUIPPED WITH:
-Head ISO 40
-D.R.O. 3 axis
USED MACHINE
09408
UNIVERSALE
Strokes mm 1000x300x400
Spindle speed rpm 54:1500
EQUIPPED WITH:
-Head ISO 40
-D.R.O. 3 axis
USED MACHINE
MILLING RAMBAUDI MOD. M3
RAMBAUDI
06236
Table dimensions mm 1300x300
Axis X mm 950
Axis Y mm 300
Axis Z mm 445
Spindle taper ISO 40
Spindle speed rpm 50-2500
Motor power Kw 3.2
Equipped...
06236
Table dimensions mm 1300x300
Axis X mm 950
Axis Y mm 300
Axis Z mm 445
Spindle taper ISO 40
Spindle speed rpm 50-2500
Motor power Kw 3.2
Equipped...
MILLING TIGER FU 110
TIGER
06798
-Axis X mm 900
-Axis Y mm 300
-Axis Z mm 500
-Table dimensions mm 1200x290
-Spindle taper ISO 40, rpm 100-1430 (n.8 speed)
-Horizontal spindle taper...
06798
-Axis X mm 900
-Axis Y mm 300
-Axis Z mm 500
-Table dimensions mm 1200x290
-Spindle taper ISO 40, rpm 100-1430 (n.8 speed)
-Horizontal spindle taper...
PELLET BURNER GS 180
08585
Thermal power in the furnace kW 212
Nominal heat output kW 180
Generator air flow m3 / h 13500
Absorbed electrical power kW 4.04
Voltage V 400
Weight...
Thermal power in the furnace kW 212
Nominal heat output kW 180
Generator air flow m3 / h 13500
Absorbed electrical power kW 4.04
Voltage V 400
Weight...
PRESS COTELLI 60 TON.
COTELLI
New05692
Table dimensions 750x450 mm
Distance between centers mm 350
Slide travel mm 0-110
Slide adjustment 70 mm
Stamp holder diameter 45
Drive motor HP...
New05692
Table dimensions 750x450 mm
Distance between centers mm 350
Slide travel mm 0-110
Slide adjustment 70 mm
Stamp holder diameter 45
Drive motor HP...
PRESS RAIMONDI TON.180
RAIMONDI
New02627
ECCENTRIC C-TYPE
WITH FRICTION
BED SIZE MM. 1000X690
SIZE SLEDGE HAMMER MM. 540X310
HOLE SIZE DIAM. MM.60
DAY LIGHT BED- SLEDGE HAMMER MM. 470...
New02627
ECCENTRIC C-TYPE
WITH FRICTION
BED SIZE MM. 1000X690
SIZE SLEDGE HAMMER MM. 540X310
HOLE SIZE DIAM. MM.60
DAY LIGHT BED- SLEDGE HAMMER MM. 470...
SPARK ERODER CHARMILLES
STRAIGHTENER MARIANI ROLLS DIAM. MM.100
MARIANI
CLD.SPI.OO11
WIDTH MM.800
N. 07 ROLLS + N. 02 COUNTER ROLLS
THICKNESS MM.0,7-6,2
USED MATERIAL
CLD.SPI.OO11
WIDTH MM.800
N. 07 ROLLS + N. 02 COUNTER ROLLS
THICKNESS MM.0,7-6,2
USED MATERIAL
PRESS GMR ART.325
GMR
09891
Force Ton 100 Ton
Distance between frames mm 1000
Max pressure 400 bar
Stroke mm 300
Weight Kg 1000
Overall dimensions mm 1900x900x2230h
NEW MACHINE...
09891
Force Ton 100 Ton
Distance between frames mm 1000
Max pressure 400 bar
Stroke mm 300
Weight Kg 1000
Overall dimensions mm 1900x900x2230h
NEW MACHINE...
COMPRESSOR CECCATO CSM10 AK
CECCATO
08831
FIXED SPEED
BELT DRIVE
Motor power HP/kW 10/7,5
Pressure Bar 10
FAD:
-l/min 996
-m3/h 60
Noise level db(A) 65
Gas 3/4''
Approx. weight Kg 305
Approx....
08831
FIXED SPEED
BELT DRIVE
Motor power HP/kW 10/7,5
Pressure Bar 10
FAD:
-l/min 996
-m3/h 60
Noise level db(A) 65
Gas 3/4''
Approx. weight Kg 305
Approx....
COMPRESSOR CECCATO CSM 7,5 AK
CECCATO
09261
FIXED SPEED
BELT DRIVE
Motor Power HP/KW 7,5/5,5
Pressure Bar 10
FAD:
-l/min 696
-m3/h 42
Noise level db(A) 64
Gas 3/4''
Approx. weight weight Kg...
09261
FIXED SPEED
BELT DRIVE
Motor Power HP/KW 7,5/5,5
Pressure Bar 10
FAD:
-l/min 696
-m3/h 42
Noise level db(A) 64
Gas 3/4''
Approx. weight weight Kg...
CONVENTIONAL LATHE TOS 320x3000
TOS
TRN.PAG.O34O
MOD. SU63A
Height of center mm.320
Max diameter swing over bed mm.640
Max diameter swing over cross carriage mm.400
Bed width mm.560
Distance between...
TRN.PAG.O34O
MOD. SU63A
Height of center mm.320
Max diameter swing over bed mm.640
Max diameter swing over cross carriage mm.400
Bed width mm.560
Distance between...
DRILLING SASS 1600x50
ECCENTRIC PRESS STANKO
STANKO IMPORT
07574
C TYPE
Power Ton
Bed size mm
Ram size mm
Distance surface table / ram mm
Adjustable stroke da mm. 0 a 320
Stroke per minute 46
USED MACHINE
07574
C TYPE
Power Ton
Bed size mm
Ram size mm
Distance surface table / ram mm
Adjustable stroke da mm. 0 a 320
Stroke per minute 46
USED MACHINE
ERODER WIRE MITSUBISHI MOD.CX20
MITSUBISHI
New04238
- Max piece size (LxPxH) mm.850x650x295
- Max piece weight Kg.800
- Table size mm.740x590
- Axis stroke (XYZ) mm.500x350x300
- Table rapids mm/min...
New04238
- Max piece size (LxPxH) mm.850x650x295
- Max piece weight Kg.800
- Table size mm.740x590
- Axis stroke (XYZ) mm.500x350x300
- Table rapids mm/min...
GUILLOTINE SHEAR MOD. CPM 20/4
IMAL
08273
Cutting lenght mm 2050
Max thickness mm 4
EQUIPPED WITH:
-Motorized rear register mm 1000
-Front and rear guards
USED MACHINE
08273
Cutting lenght mm 2050
Max thickness mm 4
EQUIPPED WITH:
-Motorized rear register mm 1000
-Front and rear guards
USED MACHINE
LATHE GAZIOLI DANIA 210x1000
GRAZIOLI
08900
WITH D.R.O.
Height of center mm 210
Distance between center mm 1000
Spindle taper CAM-LOCk 6''
Spindle Bore mm 77
EQUIPPED WITH:
-Chuck mm...
08900
WITH D.R.O.
Height of center mm 210
Distance between center mm 1000
Spindle taper CAM-LOCk 6''
Spindle Bore mm 77
EQUIPPED WITH:
-Chuck mm...
.jpeg)
LATHE HITACHI SEIKI HT20SII
HITACHI SEIKI
09353
CNC YASNAC LX3
CAPACITY':
Swing diameter mm 380
Max turning diameter mm 210
Bar passage mm 51
STROKES:
X-axis stroke mm 200
Z axis stroke mm...
09353
CNC YASNAC LX3
CAPACITY':
Swing diameter mm 380
Max turning diameter mm 210
Bar passage mm 51
STROKES:
X-axis stroke mm 200
Z axis stroke mm...
LATHE MORANDO PA25 250x1500
MORANDO
07379
Height of center mm 255
Turning diameter on the bed mm 500
Turning diameter on the cross slide mm 310
Turning diameter on the gap mm 720
Distance...
07379
Height of center mm 255
Turning diameter on the bed mm 500
Turning diameter on the cross slide mm 310
Turning diameter on the gap mm 720
Distance...
LATHE PASQUINO 350x4000
PASQUINO
07724
MOD. EURO 350x4000
Height of center 350 mm
Turning diameter on the bed mm 700
Turning diameter on the carriage mm 460
Turning diameter on the gap mm...
07724
MOD. EURO 350x4000
Height of center 350 mm
Turning diameter on the bed mm 700
Turning diameter on the carriage mm 460
Turning diameter on the gap mm...
MILLING DECKEL
MILLING ITAMA FV20S
ITAMA
09442
TABLE:
Dimensions 1270x254 mm
T-slots n.03 - 16x63 mm
Max table load 150 kg
AXES:
X axis longitudinal strokel 780 mm
Y axis transversal stroke 400...
09442
TABLE:
Dimensions 1270x254 mm
T-slots n.03 - 16x63 mm
Max table load 150 kg
AXES:
X axis longitudinal strokel 780 mm
Y axis transversal stroke 400...
MILLING TOS KURIM FNK25A
TOS
07344
Table surface mm 290x1250
T-slots a T n.3 / mm 14x80
Longitudinal table stroke mm 800
Cross table stroke mm 360
Vertical table stroke mm...
07344
Table surface mm 290x1250
T-slots a T n.3 / mm 14x80
Longitudinal table stroke mm 800
Cross table stroke mm 360
Vertical table stroke mm...
SURFACE GRINDING BLOHM
THREADING MACHINE CRI-DAN
CRI-DAN
FIL.UTE.OO17
-HEIGHT OF CENTRE MM.225
-STROKE MM.150
-SPINDLE RPM FROM 90 TO 3500
EQUIPED WITH:
-PNEUMATIC SPINDLE DIAM MM.180
USED MACHINE
FIL.UTE.OO17
-HEIGHT OF CENTRE MM.225
-STROKE MM.150
-SPINDLE RPM FROM 90 TO 3500
EQUIPED WITH:
-PNEUMATIC SPINDLE DIAM MM.180
USED MACHINE
DRILLING ADRIA MACHINE
ADRIA MACHINE
09795
MOD. EXPO 40 PGM DA
TILTING TABLE WITH VICE
AUTOMATIC QUILL DOWNLOAD
CONE C.M. 4
TWO POLARITY MOTOR
THREADING BY TELEINVERTER 24V
LUBRICATION WITH...
09795
MOD. EXPO 40 PGM DA
TILTING TABLE WITH VICE
AUTOMATIC QUILL DOWNLOAD
CONE C.M. 4
TWO POLARITY MOTOR
THREADING BY TELEINVERTER 24V
LUBRICATION WITH...
CAR ELEVATOR STILL
CENTER OLIVETTI MOD. HORIZON 400
OLIVETTI
New05577
CNC OSAI 8600 MC
- Strokes mm 500x400x455
- Dimensions pallet mm 400x400
- Tool changer 30 positions
USED MACHINE
New05577
CNC OSAI 8600 MC
- Strokes mm 500x400x455
- Dimensions pallet mm 400x400
- Tool changer 30 positions
USED MACHINE
CLAMPING PLATE 3500x2000
09829
Dimensions 3500x2000x360
With T-slots
USED MACHINE
Dimensions 3500x2000x360
With T-slots
USED MACHINE
DRILLING MOD. Z03080
05936
Drilling capacity max mm.80
Straddle mm.1600
Distance between spindle center and column min/max mm.450/2050
Distance between spindle nose and working...
Drilling capacity max mm.80
Straddle mm.1600
Distance between spindle center and column min/max mm.450/2050
Distance between spindle nose and working...
EFFORT TESTING PRESS GALDABINI
ERODER CHARMILLES MOD. ELERODA 400
ERODER WIRE FANUC TAPE CUT W2
FANUC
New04860
CNC FANUC
-MAX TOOL SIZE MM.450x650x300
-MAX TOOL WEIGHT KG. 500
-TABLE STROKE MM.350X500
-TANK CAPACITY LT. 300
-MAX TABLE SPEED MM.900/MIN....
New04860
CNC FANUC
-MAX TOOL SIZE MM.450x650x300
-MAX TOOL WEIGHT KG. 500
-TABLE STROKE MM.350X500
-TANK CAPACITY LT. 300
-MAX TABLE SPEED MM.900/MIN....
EXTERNAL GRINDING MACHINE ZOCCA RU 600
ZOCCA
07405
Height of center mm 180
Grinding diameter mm 360
Grinding lenght mm 600
Wheel dimensions mm 400x40
Table rotation -10/2 degrees
head rotation +/-45...
07405
Height of center mm 180
Grinding diameter mm 360
Grinding lenght mm 600
Wheel dimensions mm 400x40
Table rotation -10/2 degrees
head rotation +/-45...
EXTERNAL GRINDING RUSSIAN
RTF.EST.O164
MM.1000
DIAM. GRINDING WHEEL MM. 400
COMPLETE WITH ACCESSORIES
USED MACHINE
MM.1000
DIAM. GRINDING WHEEL MM. 400
COMPLETE WITH ACCESSORIES
USED MACHINE
EXTERNAL GRINDING SAIMP MOD.R6X600
SAIMP
New02771
max grinding lenght: mm.630
Distance between centre mm.610
height of centre mm.130
TABLE
max longitudinal stroke mm.620
min longitudinal automatic...
New02771
max grinding lenght: mm.630
Distance between centre mm.610
height of centre mm.130
TABLE
max longitudinal stroke mm.620
min longitudinal automatic...
FORACORD 200 TON. 4 HEADS
New03726
Base mm.710x600x300h
Diameter mm.560
Jaws mm.160x115
USED MACHINE
Base mm.710x600x300h
Diameter mm.560
Jaws mm.160x115
USED MACHINE
GRINDING CENTERLESS GHIRINGHELLI
GRINDING INTERNAL BRYANT
BRYANT
RTF.INT.OO74
DIAM. GRINDING WHEEL: mm 60
DISTANCE BETWEEN CENTRE: mm 500
HEIGHT OF CENTRE: mm 350
USED MACHINE
RTF.INT.OO74
DIAM. GRINDING WHEEL: mm 60
DISTANCE BETWEEN CENTRE: mm 500
HEIGHT OF CENTRE: mm 350
USED MACHINE
GRINDING MORARA MM.400x1500
MORARA
RTF.EST.O228
MOD. REU 1500
-MAX SWING DIAMETER MM. 400
-MAX GRINDING LENGTH MM. 1500
-HEIGHT OF CENTRE MM.207
-DISTANCE BETWEEN CENTRE MM.1530
-MAX LONGITUDINAL...
RTF.EST.O228
MOD. REU 1500
-MAX SWING DIAMETER MM. 400
-MAX GRINDING LENGTH MM. 1500
-HEIGHT OF CENTRE MM.207
-DISTANCE BETWEEN CENTRE MM.1530
-MAX LONGITUDINAL...
GRINDING SURFACE CANTALUPPI MOD. MC 800
CANTALUPPI
New02626
Caratteristiche tecniche
-Table stroke mm.800
-transversal movement mm.150
-Table surface:
width mm.200
lenght mm.860
-Max grinding lenght
in...
New02626
Caratteristiche tecniche
-Table stroke mm.800
-transversal movement mm.150
-Table surface:
width mm.200
lenght mm.860
-Max grinding lenght
in...
GRINDING SURFACE VERTICAL RUSSIAN STANKOIMPORT
STANKOIMPORT
New03812
MODEL 3-732
BED SIZE MM.320X800
GRINDING WHEEL DIAM. MM.400
STROKE MM.1200X400X450H
EQUIPED WITH ACCESSORIES
USED MACHINE
New03812
MODEL 3-732
BED SIZE MM.320X800
GRINDING WHEEL DIAM. MM.400
STROKE MM.1200X400X450H
EQUIPED WITH ACCESSORIES
USED MACHINE
GUILLOTINES SHEAR COMAL
INTERNAL/EXTERNAL GRINDING ZOCCA
ZOCCA
New04141
INTERNAL/EXTERNAL
MM.180X600
DIAMETER WHEEL MM 400
WIDTH WHEEL MM40
WITH MARPOSS
USED MACHINE
New04141
INTERNAL/EXTERNAL
MM.180X600
DIAMETER WHEEL MM 400
WIDTH WHEEL MM40
WITH MARPOSS
USED MACHINE
KALTELBACH SAW BLADE MOD. HDM 800
LATHE CAZENEUVE 330x1500
CAZENEUVE
New04878
MOD. HB 725
Height of center mm.330
Max diameter swing over bed mm.660
Max diameter swing over cross carriage mm.400
Distance between center...
New04878
MOD. HB 725
Height of center mm.330
Max diameter swing over bed mm.660
Max diameter swing over cross carriage mm.400
Distance between center...
.jpeg)
LATHE COMEC TGA 210Nx1000
COMEC
08899
Height of center mm 210
Distance between center mm 1000
Spindle nose CAM-LOCK 5''
Spindle bore mm 77
EQUIPPED WITH:
-Chuck mm 210
-Turret
USED...
08899
Height of center mm 210
Distance between center mm 1000
Spindle nose CAM-LOCK 5''
Spindle bore mm 77
EQUIPPED WITH:
-Chuck mm 210
-Turret
USED...
LATHE FIMAP MOD. TP 26
FIMAP
09354
Height of center on the bed mm 260
Height of center on the carriage mm 175
Height of center on the gap mm 300
Distance between centers mm...
09354
Height of center on the bed mm 260
Height of center on the carriage mm 175
Height of center on the gap mm 300
Distance between centers mm...
LATHE GRAZIANO SAG 14x1500
GRAZIANO
07249
Distance between center mm 1500
Height of center mm 180
Turning diameter on the bed mm 360
Turning diameter on the carriage mm 240
EQUIPEED...
07249
Distance between center mm 1500
Height of center mm 180
Turning diameter on the bed mm 360
Turning diameter on the carriage mm 240
EQUIPEED...
LATHE GRAZIOLI DANIA 180x1500
GRAZIOLI
09317
Center height 180 mm
Distance between centers mm 1500
Bed width 300 mm
Max turning diameter on the bed mm 1360
Max turning diameter on the carriage...
09317
Center height 180 mm
Distance between centers mm 1500
Bed width 300 mm
Max turning diameter on the bed mm 1360
Max turning diameter on the carriage...
LATHE PADOVANI LABOR 275x1500
LATHE TACCHI SABRE 400x2000
TACCHI
TRN.PAG.O627
Height of center mm.400
Max diameter swing over bed mm.800
Max diameter swing over cross carriage mm.520
Max diameter swing over gap mm.1000
Bed...
TRN.PAG.O627
Height of center mm.400
Max diameter swing over bed mm.800
Max diameter swing over cross carriage mm.520
Max diameter swing over gap mm.1000
Bed...
MEASURING ARM FARO
FARO
09295
PLATINUM 2.4
6 AXIS
PERFORMANCE SPECIFICATIONS:
Measuring range m 2,4
Volumetric accuracy mm +/- 0,036
Single point repeatability mm 0,025
FaroArm...
09295
PLATINUM 2.4
6 AXIS
PERFORMANCE SPECIFICATIONS:
Measuring range m 2,4
Volumetric accuracy mm +/- 0,036
Single point repeatability mm 0,025
FaroArm...
MILLING ARNO MOD. F20
ARNO
07626
Table dimensions mm 1250x270
Longitudinal mm 900
Cross mm 290
Vertical mm 400
Spindle taper ISO 40
Spindle speed n.12 - rpm 40-1750
Quill diameter...
07626
Table dimensions mm 1250x270
Longitudinal mm 900
Cross mm 290
Vertical mm 400
Spindle taper ISO 40
Spindle speed n.12 - rpm 40-1750
Quill diameter...
MILLING DEBER MOD. FU 180-M
DEBER
09374
Working plane mm 1570x380
Axis X stroke mm 1400
Axis Y stroke mm 350
Axis Z stroke mm 620
Bi-rotary head ISO 50
USED MACHINE
09374
Working plane mm 1570x380
Axis X stroke mm 1400
Axis Y stroke mm 350
Axis Z stroke mm 620
Bi-rotary head ISO 50
USED MACHINE
.jpeg)
MILLING HEAD UNIVERSAL ISO 50
08824
Universal
HURON type
manual positioning
USED EQUIPMENT
Universal
HURON type
manual positioning
USED EQUIPMENT
MILLING NOVAR 1500 K CN
NOVAR
06619
CNC HEIDENHAIN TNC 135
-Woring plane mm 1500x360
-Longitudinal stroke mm 1200
-Cross stroke mm 420
-Verticale stroke mm 620
-Spindle taper ISO...
06619
CNC HEIDENHAIN TNC 135
-Woring plane mm 1500x360
-Longitudinal stroke mm 1200
-Cross stroke mm 420
-Verticale stroke mm 620
-Spindle taper ISO...
MILLING OERLINKON M30P
OERLIKON
07024
TABLE:
Working surface mm 1600x365
T-slots number and width mm 3x18
T-slots distance mm 80
Longitudinal stroke mm 1320
Cross stroke mm 310
Vertical...
07024
TABLE:
Working surface mm 1600x365
T-slots number and width mm 3x18
T-slots distance mm 80
Longitudinal stroke mm 1320
Cross stroke mm 310
Vertical...
PIPE BENDING MACHINE BEMA CNC 32 D
PRESS BALCONI DA NASTRO DM 3O
BALCONI
PRS.ECG.O239
* Power 30 T
* speed 70
* 140 strokes/min.
* Engine MBM 8 HP
* Max stroke 150 mm.
* working table mm.800x500
* Complete with feeder...
PRS.ECG.O239
* Power 30 T
* speed 70
* 140 strokes/min.
* Engine MBM 8 HP
* Max stroke 150 mm.
* working table mm.800x500
* Complete with feeder...
SHARPENING INVIMEC A.T. 401
INVIMEC
07871
Max diameter on centers mm 200
Max distance between centers mm 550
Table size mm 800x98
Longitudinal travel mm 400
Angular adjustment of table 360...
07871
Max diameter on centers mm 200
Max distance between centers mm 550
Table size mm 800x98
Longitudinal travel mm 400
Angular adjustment of table 360...
TRUCK LIFT LUGLI ELX30
LUGLI
06671
BATTERY
Load capacity Kg 3000
Max forks height mm 4000
Forks mm 1200x130x45
USED MACHINE
06671
BATTERY
Load capacity Kg 3000
Max forks height mm 4000
Forks mm 1200x130x45
USED MACHINE
TUBE-BENDING PEDRAZZOLI MOD. UNI 8O
PEDRAZZOLI
PGT.OLE.OOO4
TECHNICAL CHARACTERISTICS
* Max sweep capacity with material resilience R=40 Kg/mm2 mm.80x5
* min. sweep radius internal mm.45
* max. sweep radius...
PGT.OLE.OOO4
TECHNICAL CHARACTERISTICS
* Max sweep capacity with material resilience R=40 Kg/mm2 mm.80x5
* min. sweep radius internal mm.45
* max. sweep radius...
UNIVERSAL MILLING MACHINE INDUMA
INDUMA
08352
WORKTABLE 1500x300 mm
T-SLOT NUMBER 3
T-SLOT WIDTH 16 mm
T-SLOT DISTANCE 55 mm
LONGITUDINAL TRAVEL 1050 mm
TRANSVERSAL TRAVEL 315 mm
VERTICAL TRAVEL...
08352
WORKTABLE 1500x300 mm
T-SLOT NUMBER 3
T-SLOT WIDTH 16 mm
T-SLOT DISTANCE 55 mm
LONGITUDINAL TRAVEL 1050 mm
TRANSVERSAL TRAVEL 315 mm
VERTICAL TRAVEL...
MILLING UNIVERSAL FOR MOULDS C.C.P.
C.C.P.
FRS.UNI.O4O3
TABLE SIZE MM.600x350
STROKES MM. X=400 - Y=320 - Z=450
VISUALIZED HEIDENHAIN MOTOR IN C.C.
SPINDLE ISO 40
EQUIPED WITH :
-TILTING TABLE
USED...
FRS.UNI.O4O3
TABLE SIZE MM.600x350
STROKES MM. X=400 - Y=320 - Z=450
VISUALIZED HEIDENHAIN MOTOR IN C.C.
SPINDLE ISO 40
EQUIPED WITH :
-TILTING TABLE
USED...
PROFILE BENDER TAURING DS 60
TAURING
09682
MOD. DS 60 HV PLUS
3 DRIVE ROLLERS
Roller shaft diameter 50 mm
Useful shaft length 115 mm
Upper multipurpose roller diameter 174 mm
Lower...
09682
MOD. DS 60 HV PLUS
3 DRIVE ROLLERS
Roller shaft diameter 50 mm
Useful shaft length 115 mm
Upper multipurpose roller diameter 174 mm
Lower...
ROUNDNESS TESTING FAG MOD. FMS 4210
FAG
New05644
ROTATION AXIS "C AXIS":
-Diameter of rotary table 200 mm
-Max load capacity 500 N
-Max control diameter 300 mm, se il tastatore è posizionato al di...
New05644
ROTATION AXIS "C AXIS":
-Diameter of rotary table 200 mm
-Max load capacity 500 N
-Max control diameter 300 mm, se il tastatore è posizionato al di...
ANGULAR PLATE 1000x2500
08730
Dimension 1000x2500 mm
Base 1000x1000 mm
USED MACHINE
Dimension 1000x2500 mm
Base 1000x1000 mm
USED MACHINE
LATHE GRAZIANO SAG 14
GRAZIANO
09368
Height of center on the bed mm 190
Height of center on the gap mm 250
Height of center on the carriage mm 120
Distance between centers mm 900
Bar...
09368
Height of center on the bed mm 190
Height of center on the gap mm 250
Height of center on the carriage mm 120
Distance between centers mm 900
Bar...
LATHE ITAMA MOD. 165/10
ITAMA
09510
Turning diameter over the bed mm 330
Turning diameter in the gap mm 476
Height of centers mm 166
Distance between centers mm 1000
Bed width mm...
09510
Turning diameter over the bed mm 330
Turning diameter in the gap mm 476
Height of centers mm 166
Distance between centers mm 1000
Bed width mm...
MILLING NOVAR 1200 K TO CN
NOVAR
06620
CNC Heidenhain TNC 135
TABLE:
Working surface mm 1200x280
T-slots n.5
T-slots width mm 14
STROKES:
Longitudinal (man./aut.) mm 950/930
Cross...
06620
CNC Heidenhain TNC 135
TABLE:
Working surface mm 1200x280
T-slots n.5
T-slots width mm 14
STROKES:
Longitudinal (man./aut.) mm 950/930
Cross...
PRESS TERMOINDURENTI CTS 8O T
SCREW PRESS ZARZ MOD. VP 1
N.2 MAGNETIC CHUCK 770x490
LATHE ALPIN 180x1000
ALPIN
09828
WORKING CAPACITY:
Center height 180 mm
Turning diameter on the bed 360 mm
Distance between centers 1000 mm
SPINDLE:
Spindle nose CAMLOCK 6
Spindle...
09828
WORKING CAPACITY:
Center height 180 mm
Turning diameter on the bed 360 mm
Distance between centers 1000 mm
SPINDLE:
Spindle nose CAMLOCK 6
Spindle...
MILLING ALCOR MOD. F10/A
ALCOR
07915
Table dimensions mm 1100x270
Axis X stroke mm 750
Axis Y stroke mm 200
Axis Z stroke mm 350
N.12 spindle speed / rpm 45-2050
EQUIPPED WITH:
- DRO 3...
07915
Table dimensions mm 1100x270
Axis X stroke mm 750
Axis Y stroke mm 200
Axis Z stroke mm 350
N.12 spindle speed / rpm 45-2050
EQUIPPED WITH:
- DRO 3...
.jpeg)
N.2 MAGNETIC CHUCK 770x360
09675
square 50 mm
EQUIPPED WITH:
-N.1 electrical unit
USED MATERIAL
AVAILABLE N.2 COUPLES
square 50 mm
EQUIPPED WITH:
-N.1 electrical unit
USED MATERIAL
AVAILABLE N.2 COUPLES
N.2 MAGNETIC CHUCK 770x410
N.2 MAGNETIC CHUCK 770x410
N.2 MAGNETIC CHUCK 760x360
BAND SAW IMET VTF500 SHI-E/ESC
IMET
09395
SEMIAUTOMATIC VERTICAL BAND SAW
Hydraulically driven,
Mitre cutting from 0° to 45° left and right.
Cutting capacity at 0°:
-Round 330 mm
-Square...
09395
SEMIAUTOMATIC VERTICAL BAND SAW
Hydraulically driven,
Mitre cutting from 0° to 45° left and right.
Cutting capacity at 0°:
-Round 330 mm
-Square...
BAR LOADER LNS SUPERHYDROBAR
CENTERING COMINI MOD. C1T/110
COMINI
06799
Min e max clamping diameter mm 14-90
Min e max diameter of collar mm 14-65
Max diameter facing and centering mm 110
Min worklenght with 2 vices mm...
06799
Min e max clamping diameter mm 14-90
Min e max diameter of collar mm 14-65
Max diameter facing and centering mm 110
Min worklenght with 2 vices mm...
CONVENTIONAL LATHE SAIMP 300X1700
SAIMP
TRN.PAM.O491
MOD. TU-60
Height of center mm.300
Max diameter swing over bed mm.600
Max diameter swing over cross carriage mm.320
Bed width mm.500
Distance between...
TRN.PAM.O491
MOD. TU-60
Height of center mm.300
Max diameter swing over bed mm.600
Max diameter swing over cross carriage mm.320
Bed width mm.500
Distance between...
DRILLING MILL FAMUP RAG 40
FAMUP
06711
Plane dimensions mm 1100x260
Spindle taper ISO 40
Automatic feeds
Electronic speed variator
Motorized axis X
Chip tank
USED MACHINE
06711
Plane dimensions mm 1100x260
Spindle taper ISO 40
Automatic feeds
Electronic speed variator
Motorized axis X
Chip tank
USED MACHINE
ENGRAVING PARPAS CP 1:1
PARPAS
06379
WORKING RANGE:
-Max circumference mm 200
-Max square mm 170
-Max rectangle mm 145x200
TABLE PIECE HOLDER :
-Table size mm 400x600
-Longitudinal...
06379
WORKING RANGE:
-Max circumference mm 200
-Max square mm 170
-Max rectangle mm 145x200
TABLE PIECE HOLDER :
-Table size mm 400x600
-Longitudinal...
EXTERNAL GRINDING RIBON MOD.RUR 800
RIBON
New02772
HEIGHT OF CENTRE MM.160
DISTANCE BETWEEN CENTRES MM.800
DIAM GRINDING WHEEL MM.400
COMPLETE WITH:
COOLANT TANK
USED MACHINE
New02772
HEIGHT OF CENTRE MM.160
DISTANCE BETWEEN CENTRES MM.800
DIAM GRINDING WHEEL MM.400
COMPLETE WITH:
COOLANT TANK
USED MACHINE
FILTER SIEF D Q-V3
GRINDING ALPA MOD. RT 300
ALPA
05959
Wheel dimension mm.140
Magnetic chuck mm.260x140
Axis X mm.300
Axis Y mm.160
Axis Z mm.200
USED MACHINE
05959
Wheel dimension mm.140
Magnetic chuck mm.260x140
Axis X mm.300
Axis Y mm.160
Axis Z mm.200
USED MACHINE
GRINDING ATHENA MOD. T1000
ATHENA
07768
Longitudinal table stroke mm 1000
Cross table stroke mm 400
Vertical head stroke mm 350
Wheel diameter mm 280
Wheel belt mm 40
USED MACHINE
07768
Longitudinal table stroke mm 1000
Cross table stroke mm 400
Vertical head stroke mm 350
Wheel diameter mm 280
Wheel belt mm 40
USED MACHINE
GRINDING STEFOR MOD. RTA
LATHE PONTIGGIA 175x1000
PONTIGGIA
08709
Height of center mm 175
Distance between center mm 1000
EQUIPPED WITH:
-Chuck diameter mm 200
-Toolholder turret
-N.6 toolholder
-Steady...
08709
Height of center mm 175
Distance between center mm 1000
EQUIPPED WITH:
-Chuck diameter mm 200
-Toolholder turret
-N.6 toolholder
-Steady...
LATHE SCHAERER
SCHAERER
TRN.CNC.O556
MOD. UDA 560X1500
Height of center mm.280
Max diameter swing over bed mm.540
Max diameter swing over cross carriage mm.375
Max diameter swing over...
TRN.CNC.O556
MOD. UDA 560X1500
Height of center mm.280
Max diameter swing over bed mm.540
Max diameter swing over cross carriage mm.375
Max diameter swing over...
MEASURING TRIDIMENSIONAL MACHINE M.D.M.
MDM
NEW00913
MOD. CATRIM
TRAVELS:
-AXIS X MM.1500
-AXIS Y MM.800
-AXIS Z MM.500
DIABASE MEASURING TABLE:
-THICKNESS MM.350
-WIDHT MM.1150
-LENGHT MM.2500
-MAX...
NEW00913
MOD. CATRIM
TRAVELS:
-AXIS X MM.1500
-AXIS Y MM.800
-AXIS Z MM.500
DIABASE MEASURING TABLE:
-THICKNESS MM.350
-WIDHT MM.1150
-LENGHT MM.2500
-MAX...
MILLING SIMPLON N.2
SIMPLON
09625
Table dimensions mm 1300x300
Axis X stroke mm 850
Axis Y stroke mm 250
Axis Z stroke mm 400
SPINDLE
manual milling head
spindle nose ISO 40
n.12...
09625
Table dimensions mm 1300x300
Axis X stroke mm 850
Axis Y stroke mm 250
Axis Z stroke mm 400
SPINDLE
manual milling head
spindle nose ISO 40
n.12...
N.2 MAGNETIC CHUCK 630x490
OLEODINAMIC PRESS AFI 80 TON
AFI
NEW03378
Diametro pistone mm 140
Piano mm 400 x 400
Luce tra i piani mm 400 circa
MACCHINA USATA
NEW03378
Diametro pistone mm 140
Piano mm 400 x 400
Luce tra i piani mm 400 circa
MACCHINA USATA
PAD-PRINTING COMEC XP 08
COMEC
07591
SLIDE INKPRINT
4 COLORS
CONTROL ELECTROPNEUMATIC
Clichè dimension mm 100x200
Ink-tray dimension mm 90
Max printing diam. mm 75
Pad horizontal stroke...
07591
SLIDE INKPRINT
4 COLORS
CONTROL ELECTROPNEUMATIC
Clichè dimension mm 100x200
Ink-tray dimension mm 90
Max printing diam. mm 75
Pad horizontal stroke...
PRESS ECCENTRIC LEGNANI TON.120
.jpeg)
RADIAL DRILING KOVOSVIT MOD. VO 50
MAS
09284
PRISMATIC GUIDEWAYS
Drilling capacity in steel mm 50
Drilling capacity on cast iron mm 60
Lenght mm 1600
Spindle taper MK5
Spindle diameter mm...
09284
PRISMATIC GUIDEWAYS
Drilling capacity in steel mm 50
Drilling capacity on cast iron mm 60
Lenght mm 1600
Spindle taper MK5
Spindle diameter mm...
RADIAL DRILL BERGONZI MOD. FS 1000
BERGONZI
08218
Max drilling capacity mm 45
Lenght mm 1000
Spindle speed Rpm 1350
EQUIPPED WITH:
Cube mm 400x500x H430
USED MACHINE
08218
Max drilling capacity mm 45
Lenght mm 1000
Spindle speed Rpm 1350
EQUIPPED WITH:
Cube mm 400x500x H430
USED MACHINE
RADIAL DRILLING STANKOIMPORT MOD. 2K52-1
EMA
08754
Drilling capacity on steel with R = 45/50 mm 25
Threading capacity on steel M16x2
Distance between spindle axis and column max/min mm...
08754
Drilling capacity on steel with R = 45/50 mm 25
Threading capacity on steel M16x2
Distance between spindle axis and column max/min mm...
STRAIGHTENER MARIANI ROLLS DIAM. MM.100
SURFACE GRINDER CAMUT 1600
TRUCK LIFT NICHIYU MOD. FB 30 PN 65 450
NICHIYU
06672
Battery
Load capacity Kg 3000
Max forks height mm 4500
Forks mm 1200x120x40
USED MACHINE
06672
Battery
Load capacity Kg 3000
Max forks height mm 4500
Forks mm 1200x120x40
USED MACHINE
UNIVERSAL MILLING ARNO 30
PRESETTING ELBO CONTROLLI E238
ELBO CONTROLLI
09232
TECHNICAL FEATURES: MECHANICS
·Measuring range:
X axis 140 mm (0 280 mm)
Z axis 380 mm
· Mobile column system
· Base and column in rectified...
09232
TECHNICAL FEATURES: MECHANICS
·Measuring range:
X axis 140 mm (0 280 mm)
Z axis 380 mm
· Mobile column system
· Base and column in rectified...
SHARPENING 3M MOD. 5/55
3M
08626
Sharpening capacity 5/55 mm
Fixed partitions n.12
Conduction ratio 1.1 -1.2
Minimum tip angle 90 degrees
Maximum tip angle180 degrees
Motor power HP...
08626
Sharpening capacity 5/55 mm
Fixed partitions n.12
Conduction ratio 1.1 -1.2
Minimum tip angle 90 degrees
Maximum tip angle180 degrees
Motor power HP...
BAND SAW IMET MOD. GBS 240 GH
IMET
08023
MANUAL/GRAVITY
Area angular cut degrees 90 +30
Cutting capacity:
- 90 degrees round mm 240
- 90 degrees square mm 230
- 90 degrees rectangular mm...
08023
MANUAL/GRAVITY
Area angular cut degrees 90 +30
Cutting capacity:
- 90 degrees round mm 240
- 90 degrees square mm 230
- 90 degrees rectangular mm...
DRILLING FIAT MOD. TR-1000 P
FIAT
07074
CAPACITY:
Max drilling diameter on cast iron R=25 mm 50
Max drilling diameter on steel R=50 mm 40
Arm lenght mm 1000
Arm vertical stroke mm...
07074
CAPACITY:
Max drilling diameter on cast iron R=25 mm 50
Max drilling diameter on steel R=50 mm 40
Arm lenght mm 1000
Arm vertical stroke mm...
LATHE GRAZIANO SAG 202
GRAZIANO
08079
CNC ECS 2302
Max swing diameter mm 540
Max turning diameter mm 310
Max turning lenght mm 600
Bar passaging mm 65
Spindle mm 250
Turret 12 positions...
08079
CNC ECS 2302
Max swing diameter mm 540
Max turning diameter mm 310
Max turning lenght mm 600
Bar passaging mm 65
Spindle mm 250
Turret 12 positions...
PRESS SANDRETTO TON.5O
SANDRETTO
PRS.OLE.O262
HOLEODINAMIC PRESS 4 COLUMNS
DAYLIGHT BETWEEN COLUMNS 490 X 260 MM.
DAYLIGHT BED- SLEDGE HAMMER 600 MM.
USED MACHINE
PRS.OLE.O262
HOLEODINAMIC PRESS 4 COLUMNS
DAYLIGHT BETWEEN COLUMNS 490 X 260 MM.
DAYLIGHT BED- SLEDGE HAMMER 600 MM.
USED MACHINE
SAW BAND FORTE MOD. SBA 241
FORTE
07424
AUTOMATIC
Round cutting capacity mm 250
Square cutting capacity mm 250x250
Angle 90 degrees
Blade dimensions mm 4100x32x1,12
Variable cutting speed...
07424
AUTOMATIC
Round cutting capacity mm 250
Square cutting capacity mm 250x250
Angle 90 degrees
Blade dimensions mm 4100x32x1,12
Variable cutting speed...
SAWBEND ANBAS TR AU 150
ANBAS
07551
Automatic
Cutting apacity diameter 150 mm
Automatic hydraulic down feed
Automatic hydraulic clamping
Automatic movement
USED MACHINE
07551
Automatic
Cutting apacity diameter 150 mm
Automatic hydraulic down feed
Automatic hydraulic clamping
Automatic movement
USED MACHINE
LATHE IMAMI MOD. IC 42
IMAMI
TRN.MON.O679
SPINDLE HOLE MM.52
BAR PASSAGING ROUND PINCER MM.42
HEIGHT OF CENTRE MM.140
WORKING STROKE LONGITUDINAL CARRIAGE MM.95
LONGITUDINAL SLIDE STROKE...
TRN.MON.O679
SPINDLE HOLE MM.52
BAR PASSAGING ROUND PINCER MM.42
HEIGHT OF CENTRE MM.140
WORKING STROKE LONGITUDINAL CARRIAGE MM.95
LONGITUDINAL SLIDE STROKE...
N.1 MAGNETIC CHUCK 1000x500
09630
square 70
EQUIPPED WITH:
-N.1 electric unit
USED MATERIAL
square 70
EQUIPPED WITH:
-N.1 electric unit
USED MATERIAL
N.2 MAGNETIC CHUCK 400x400
PRESS GOBBI 30 TON
PRESS GOBBI 60 TON.
PRESS TERENZIO 4 COLUMN
TERENZIO
New04738
BED SIZE MM 350X450
VERTICAL DAY LIGHT MM 450
DAY LIGHT BETWEEN COLUMNS MM 350
400 KG/CM2
USED MACHINE
New04738
BED SIZE MM 350X450
VERTICAL DAY LIGHT MM 450
DAY LIGHT BETWEEN COLUMNS MM 350
400 KG/CM2
USED MACHINE
BAND SAW IMET MOD. GBS 218
IMET
08022
MANUAL
Area angular cut degrees 90 +30
Cutting capacity:
- 90 degrees round mm 220
- 90 degrees square mm 210
- 90 degrees rectangular mm...
08022
MANUAL
Area angular cut degrees 90 +30
Cutting capacity:
- 90 degrees round mm 220
- 90 degrees square mm 210
- 90 degrees rectangular mm...
SHEET METAL LIFT DEVICE ATA
07772
MOD. GPL4F/600 TEL. SUBBIATO
Total load 600 Kg
Sheet lenght 6 mt
USED MACHINE
MOD. GPL4F/600 TEL. SUBBIATO
Total load 600 Kg
Sheet lenght 6 mt
USED MACHINE
.jpg)
BAR LOADER IEMCA TS 560/33/P
IEMCA
09403
Bar diameter 5:65 mm
Max warehouse capacity 3/4 superimposed planes mm 1800
Power supply voltage Volt 380 three-phase / Hz 50
Installed power kW...
09403
Bar diameter 5:65 mm
Max warehouse capacity 3/4 superimposed planes mm 1800
Power supply voltage Volt 380 three-phase / Hz 50
Installed power kW...
ENGRAVING MACHINE DECKEL KF1
DECKEL
New02042
Control engine for milling-holder spindle
-Power kw.0.8 / 1.1
-Engine rotation speed g/min.1400/2800
Fixed working table
- Fixing surface...
New02042
Control engine for milling-holder spindle
-Power kw.0.8 / 1.1
-Engine rotation speed g/min.1400/2800
Fixed working table
- Fixing surface...
ERODER SPARK JSEDM
JSEDM
New03728
MOD. M304N
GENERATOR 60A
STROKE MM. X 300 Y 250 Z 250/300
TANK SIZE MM. 750X450
TABLE SIZE MM.600X300
DISTANCE TABLE ELETTRODE ATTACHMENT MM...
New03728
MOD. M304N
GENERATOR 60A
STROKE MM. X 300 Y 250 Z 250/300
TANK SIZE MM. 750X450
TABLE SIZE MM.600X300
DISTANCE TABLE ELETTRODE ATTACHMENT MM...
EXTERNAL GRINDER SCHAUDT 600
SCHAUDT
06663
Distance between center mm 600
Axis X stroke mm 900
Axis Y stroke mm 150
Height of center mm 160
Workpiece head speed 480 rpm, n. 8
Dimensions wheel...
06663
Distance between center mm 600
Axis X stroke mm 900
Axis Y stroke mm 150
Height of center mm 160
Workpiece head speed 480 rpm, n. 8
Dimensions wheel...
GRINDING MAGNAGHI
MAGNAGHI
RTF.SCE.O186
Min. grinding diameter mm 2
Max grinding diameter for tool mm 150 x mm 85
Max grinding diameter for pipe mm 200 x mm 100
Tickness, hole, operating...
RTF.SCE.O186
Min. grinding diameter mm 2
Max grinding diameter for tool mm 150 x mm 85
Max grinding diameter for pipe mm 200 x mm 100
Tickness, hole, operating...
LATHE FIMAP 220X1000
FIMAP
TRN.PAM.O6O6
HEIGHT OF CENTER MM 250
DITANCE BETWEEN CENTER MM 1150
EQUIPPED:
TURRETT
SELFCENTER SPINDLE
COPIATOR
TOOL HOLDER
MACCHINA USATA
TRN.PAM.O6O6
HEIGHT OF CENTER MM 250
DITANCE BETWEEN CENTER MM 1150
EQUIPPED:
TURRETT
SELFCENTER SPINDLE
COPIATOR
TOOL HOLDER
MACCHINA USATA
MILLING ARNO MOD. F30
ARNO
08854
TABLE:
Table dimensions mm 1550x350
STROKES:
Longitudinal mm 1150
Cross mm 330
Vertical mm 440
SPINDLE:
Spindle taper ISO 50
Spindle speed n.12 - rpm...
08854
TABLE:
Table dimensions mm 1550x350
STROKES:
Longitudinal mm 1150
Cross mm 330
Vertical mm 440
SPINDLE:
Spindle taper ISO 50
Spindle speed n.12 - rpm...
MILLING GAMBIN 3M
GAMBIN
09390
Table size mm 1520x385
Longitudinal stroke axis X mm 1000
Cross stroke axis Y mm 420
Vertical stroke axis Z mm 710
Max height workpiece mm 513...
09390
Table size mm 1520x385
Longitudinal stroke axis X mm 1000
Cross stroke axis Y mm 420
Vertical stroke axis Z mm 710
Max height workpiece mm 513...
ORTHOGONAL MILLING HEAD ISO 50
08825
Orthogonal type
manual positioning
USED EQUIPMENT
Orthogonal type
manual positioning
USED EQUIPMENT
SHARPENING UNIVERSAL HARO 12
HARO
New04595
-DISTANCE BETWEEN CENTRE MM.650
-HEIGHT OF CENTRE MM.130
-MAX DIAM BETWEEN CENTRE MM.280
-STROKE LONGITUDINAL BY HAND MM.500
-STROKE LONGITUDINAL...
New04595
-DISTANCE BETWEEN CENTRE MM.650
-HEIGHT OF CENTRE MM.130
-MAX DIAM BETWEEN CENTRE MM.280
-STROKE LONGITUDINAL BY HAND MM.500
-STROKE LONGITUDINAL...
AUTOMATIC STEADY REST MORARI 161/1400
09859
Hydraulic automatic steady rest model 161/1400
Clamping range mm 50-175
USED EQUIPMENT
N.4 pieces in stock
Hydraulic automatic steady rest model 161/1400
Clamping range mm 50-175
USED EQUIPMENT
N.4 pieces in stock
DRILLING ADRIA MACHINE
ADRIA
07313
MOD. 28 EXPORT PGM
TILTING TABLE WITH VICE
C.M. 3
TWO POLE MOTOR
TELEINVERTER 24V
Technical specifications:
Drilling capacity with previous hole...
07313
MOD. 28 EXPORT PGM
TILTING TABLE WITH VICE
C.M. 3
TWO POLE MOTOR
TELEINVERTER 24V
Technical specifications:
Drilling capacity with previous hole...
DRILLING ACM NEW DRILL 40
NEW DRILL
08784
SPEED VARIATOR
TAPPING WITH TELEINVERTER
SPINDLE AUTOMATIC LOWERING
TILTING TABLE WITH VICE
Drilling capacity on steel mm 40
Drilling capacity on...
08784
SPEED VARIATOR
TAPPING WITH TELEINVERTER
SPINDLE AUTOMATIC LOWERING
TILTING TABLE WITH VICE
Drilling capacity on steel mm 40
Drilling capacity on...
MAGNETIC LIFTER 3000 KG
MILLING SIMPLON
SIMPLON
07654
Table dimensions mm 1200x260
Axis X stroke mm 650
Axis Y stroke mm 300
Axis Z stroke mm 400
Spindle speed n.12 - rpm 25:1500
Rotary head ISO 40
USED...
07654
Table dimensions mm 1200x260
Axis X stroke mm 650
Axis Y stroke mm 300
Axis Z stroke mm 400
Spindle speed n.12 - rpm 25:1500
Rotary head ISO 40
USED...
N.1 MAGNETIC CHUCK 770x410
PRESS BROSI KTB5
PRESETTING SPERONI STP 56 MM2
SPERONI
09562
Longitudinal stroke (x axis) 250 mm
Vertical stroke 800 mm
Movement speed 850 mm/min.
USED MACHINE
09562
Longitudinal stroke (x axis) 250 mm
Vertical stroke 800 mm
Movement speed 850 mm/min.
USED MACHINE
SEMIAUTOMATIC SAW BAND ROSSO & C.
ROSSO & C.
07960
Cutting capacity:
-round mm 260
-square mm 230
-rectangle mm 260x300
Four speed motor
USED MACHINE
07960
Cutting capacity:
-round mm 260
-square mm 230
-rectangle mm 260x300
Four speed motor
USED MACHINE
THREE-DIMENSIONAL MEASURING
MDM
08369
MDM CATRIM GR2
X-AXIS TRAVEL 720 mm
Y-AXIS TRAVEL 520 mm
TABLE SIZE 850x1500x300 mm
EQUIPPED WITH:
-GRANITE PLAN
USED MACHINE
08369
MDM CATRIM GR2
X-AXIS TRAVEL 720 mm
Y-AXIS TRAVEL 520 mm
TABLE SIZE 850x1500x300 mm
EQUIPPED WITH:
-GRANITE PLAN
USED MACHINE
N.1 MAGNETIC CHUCK 610x410
.jpeg)
SHARPENING CUOGHI APE 35
.jpeg)
CHIP CONVEYOR
.jpeg)
COMPRESSOR ALUP
ALUP
07140
MOD. VARIO 7,5
Pressure max 10 Bar
Flow rate 1040 l/min
Power 7,5 Kw/10 Hp
EQUIPPED WITH:
-Tank
-Dryer
USED MACHINE
07140
MOD. VARIO 7,5
Pressure max 10 Bar
Flow rate 1040 l/min
Power 7,5 Kw/10 Hp
EQUIPPED WITH:
-Tank
-Dryer
USED MACHINE
COMPRESSOR MATTEI ERC 1022L
ENGRAVING PEAR MOD.PF/2N
ENGRAVING PIZZOCCHERO PK2
PIZZOCCHERO
PAN.TOG.OO1O
1 - 1,5
VERTICAL STROKE MM 300
TRASVERSAL STROKE MM 450
RPM FROM 720 TO 15.000
USED MACHINE
PAN.TOG.OO1O
1 - 1,5
VERTICAL STROKE MM 300
TRASVERSAL STROKE MM 450
RPM FROM 720 TO 15.000
USED MACHINE
GRINDING SURFACE DELTA
09856
MOD. LB300
Distance between column axis and grinding wheel 300 mm
Max distance between plane and grinding wheel 280 mm
Max grinding surface mm...
MOD. LB300
Distance between column axis and grinding wheel 300 mm
Max distance between plane and grinding wheel 280 mm
Max grinding surface mm...
GRINDING SURFACE JUNG
JUNG
RTF.TAN.O139
AXIS X: mm 600
AXIS Y: mm 350
AXIS Z: mm 400
BED: mm 600X 170
DIAM. GRINDING WHEEL: mm 200
USED MACHINE
RTF.TAN.O139
AXIS X: mm 600
AXIS Y: mm 350
AXIS Z: mm 400
BED: mm 600X 170
DIAM. GRINDING WHEEL: mm 200
USED MACHINE
MILLING SAIMP N. 2
SAIMP
New05221
ORIENTABLE VERTICAL HEAD
Table mm 200x1100
Axis X mm 1000
Axis Y mm 250
Axis Z mm 500
Spindle speed rpm 32:1450
MACHINE USED
New05221
ORIENTABLE VERTICAL HEAD
Table mm 200x1100
Axis X mm 1000
Axis Y mm 250
Axis Z mm 500
Spindle speed rpm 32:1450
MACHINE USED
PIPE BENDING MACHINE CRIPPA
PRESETTING ELBO CONTROLLI E238ARA
ELBO CONTROLLI
08039
Axis X mm 140 (diam 280 mm)
Axis Z mm 380
Rotary spindleholder interchangeable
Base and column in grounded granite
Special prismatic guides
Double...
08039
Axis X mm 140 (diam 280 mm)
Axis Z mm 380
Rotary spindleholder interchangeable
Base and column in grounded granite
Special prismatic guides
Double...
PRESS TCS FROM TON.5
SAW BAND THOMAS MOD. 255
THOMAS
New04434
SEMI-AUTOMATIC
90 DEGREES CUTTING
Cutting capacity:
-Round mm 280
-Square mm 250
-Rectangle mm 250x320
EQUIPPED WITH:
-Speed variator
USED MACHINE
New04434
SEMI-AUTOMATIC
90 DEGREES CUTTING
Cutting capacity:
-Round mm 280
-Square mm 250
-Rectangle mm 250x320
EQUIPPED WITH:
-Speed variator
USED MACHINE
SAW BAND THOMAS MOD. 310I
THOMAS
09849
SEMI-AUTOMATIC
Cutting capacity:
-90° round 210 mm, square 220x200 mm, rectangle 300x190 mm
-45° right round 180 mm, square 170x170 mm, rectangle...
09849
SEMI-AUTOMATIC
Cutting capacity:
-90° round 210 mm, square 220x200 mm, rectangle 300x190 mm
-45° right round 180 mm, square 170x170 mm, rectangle...
SAW MILL CHENLONG MOD. G4028
CHENLONG
06692
SEMI-AUTOMATIC
Cutting capacity:
-Round mm 280
-Square mm 230x230
-Rectangle mm 300x220
Blade dimensions mm 0.9x27x3350
Motor power kW 1.8
Approx....
06692
SEMI-AUTOMATIC
Cutting capacity:
-Round mm 280
-Square mm 230x230
-Rectangle mm 300x220
Blade dimensions mm 0.9x27x3350
Motor power kW 1.8
Approx....
SHARPENING CROSS MOD. GM20
SHARPENING UNIVERSAL REINECKER MOD. WZS-5
REINECKER
New04597
-MAX WORK PIECE LENGHT MM.550
-MAX WORK PIECE DIAM MM.270
-MAX WORK PIECE HEIGHT MM.150
-MAX CUTTING LENGHT, AFFILATURA CYLINDRIC MM.350
-MAX CUTTING...
New04597
-MAX WORK PIECE LENGHT MM.550
-MAX WORK PIECE DIAM MM.270
-MAX WORK PIECE HEIGHT MM.150
-MAX CUTTING LENGHT, AFFILATURA CYLINDRIC MM.350
-MAX CUTTING...
TEMPERING FURNACE
UNIVERSAL MILLLING CERNOTTO CS1300
CERNOTTO
07304
stroke axis X mm 800
stroke axis Y mm 300
stroke axis Z mm 440
N. 12 speed 30-1100 Rpm
with:
Rotating Head ISO 40
USED MACHINES
07304
stroke axis X mm 800
stroke axis Y mm 300
stroke axis Z mm 440
N. 12 speed 30-1100 Rpm
with:
Rotating Head ISO 40
USED MACHINES
CHUCK 4 JAWS 315
09314
FIAL 4 JAWS
double guide 4+4+4
Diametere mm 315
with back plate CAMLOCK 8''
USED MATERIAL
FIAL 4 JAWS
double guide 4+4+4
Diametere mm 315
with back plate CAMLOCK 8''
USED MATERIAL
PUNCHER CUTTING VERTEX VEC 500 G
VERTEX
07973
Precision cutting and grinding of punches
Work dimensions:
-Max diam. 25x500 mm
-Lenght min. mm 60
USED MACHINE
07973
Precision cutting and grinding of punches
Work dimensions:
-Max diam. 25x500 mm
-Lenght min. mm 60
USED MACHINE
.jpeg)
3 JAW CHUCK RHOM 400
07674
Double guide
Dameter 400 mm
Hole mm 120
USED EQUIPMENT
Double guide
Dameter 400 mm
Hole mm 120
USED EQUIPMENT
LOAD BALANCER 1 TON.
09573
Lenght 4 meters
2 ganci
USED MATERIAL
AVAILABLE N.02 PIECES
Lenght 4 meters
2 ganci
USED MATERIAL
AVAILABLE N.02 PIECES
TAVOLA ROTANTE VERTEX 406 MM
09271
Table dimensions mm 406 / 16 inches
Positioning Horizontal Vertical
360 deg
6 T slot
Load Capacity horizontal 140 Kg
Load Capacity vertical 60...
Table dimensions mm 406 / 16 inches
Positioning Horizontal Vertical
360 deg
6 T slot
Load Capacity horizontal 140 Kg
Load Capacity vertical 60...
SANDING MACHINE APM MOD. L125
APM
09507
HP 1-1,5
RPM 1400-2800
M/S 15-30
BELT DIMENSIONS MM 1500x120
APPR. OVERALL DIMENSIONS MM 450x830x1050 H
APPR. WEIGHT KG 65
NEW MACHINE
09507
HP 1-1,5
RPM 1400-2800
M/S 15-30
BELT DIMENSIONS MM 1500x120
APPR. OVERALL DIMENSIONS MM 450x830x1050 H
APPR. WEIGHT KG 65
NEW MACHINE
DRYER CDX18:
CECCATO
09847
Pressure max bar 16
FAD l/min 1825
FAD m3/h 109
W 284
Volt/Hz/Ph 230/50/1
Gas/DN 3/4'' M
Approx. weight Kg 27
Approx. overall dimensions (LxWxH) mm...
09847
Pressure max bar 16
FAD l/min 1825
FAD m3/h 109
W 284
Volt/Hz/Ph 230/50/1
Gas/DN 3/4'' M
Approx. weight Kg 27
Approx. overall dimensions (LxWxH) mm...
BEAM H (IPE) 445 x 305 mm
09238
Capacity q.li 100
Length 9250 mm
Runway length 74 m + 74 m
USED MATERIAL
AVAILABLE N.4 PIECES
Capacity q.li 100
Length 9250 mm
Runway length 74 m + 74 m
USED MATERIAL
AVAILABLE N.4 PIECES
MILLING RAPID HEAD INDUMA
ANGULAR PLATE
08865
with T slot on frontal and superior side
mm 700 X 900
Base mm 900 x 360
USED MATERIAL
with T slot on frontal and superior side
mm 700 X 900
Base mm 900 x 360
USED MATERIAL
GRINDING SURFACE DELTA MOD. LA 300
DELTA
09405
Distance between column axis and wheel axis mm 300
Max. distance between table-level and wheel mm 280
Max. grindable surface mm 140x330
Size of the...
09405
Distance between column axis and wheel axis mm 300
Max. distance between table-level and wheel mm 280
Max. grindable surface mm 140x330
Size of the...
.jpeg)
CONVENTIONAL LATHE ALCIONE 180x1000
ALCIONE
New05088
Height of center mm.180
Max diameter swing over bed mm.360
Max diameter swing over cross carriage mm.220
Distance between center mm.1000
Spindle bore...
New05088
Height of center mm.180
Max diameter swing over bed mm.360
Max diameter swing over cross carriage mm.220
Distance between center mm.1000
Spindle bore...
DRILLING FELISATTI 332 R
MEASURING MACHINE DEA SWIFT
MILLING VERTICAL WANDERER
WANDERER
FRS.VER.O25O
AXIS X: mm 300
AXIS Y: mm 220
AXIS Z: mm 300
TABLE SIZE: mm 250X 1000
USED MACHINE
FRS.VER.O25O
AXIS X: mm 300
AXIS Y: mm 220
AXIS Z: mm 300
TABLE SIZE: mm 250X 1000
USED MACHINE
MORTISING MACHINE AURORA
N.2 ANGLE PLATE MM 500x600H
08201
Dimensions mm 500x600H
Base dimensions mm 500x370
USED EQUIPMENT
Dimensions mm 500x600H
Base dimensions mm 500x370
USED EQUIPMENT
SAW BAND IMET MOD. GBS 218
IMET
09898
MANUAL
Area angular cut degrees 90 +30
Cutting capacity:
- 90 degrees round mm 220
- 90 degrees square mm 210
- 90 degrees rectangular mm...
09898
MANUAL
Area angular cut degrees 90 +30
Cutting capacity:
- 90 degrees round mm 220
- 90 degrees square mm 210
- 90 degrees rectangular mm...
SHARPENING ACETI ART. 101
ACETI
09660
Motor 2 speeds Rpm 1400:2800
Voltage Volt 380
Power Kw 1.8
Frequency Hz 50
Cup wheel dimensions:
-Outer diameter mm 200
-Hollow diameter mm 115
-Hole...
09660
Motor 2 speeds Rpm 1400:2800
Voltage Volt 380
Power Kw 1.8
Frequency Hz 50
Cup wheel dimensions:
-Outer diameter mm 200
-Hollow diameter mm 115
-Hole...
TAGLIA BULINI MEC SYSTEM
MEC SYSTEM
09668
TIPO VERTEX
PRECISION HEAD-GROUND PUNCHES
Working range:
-Max. diameter 25x500 mm
-Minimum length 60 mm
USED MACHINE
AVAILABLE N.2 PIECES
09668
TIPO VERTEX
PRECISION HEAD-GROUND PUNCHES
Working range:
-Max. diameter 25x500 mm
-Minimum length 60 mm
USED MACHINE
AVAILABLE N.2 PIECES
TRUCK LIFT LINDE E12
.jpg)
.jpg)
COLUMN DRILLING POLI E MIGLIORINI
DRILL
08390
DRILL 30
MAX DRILLING DIAMETER 30 mm
SPINDLE SPEED 100-2400 rpm
TABLE SIZE 330x340 mm
OVERALL DIMENSIONS 500x900x1800 mm
USED MACHINE
08390
DRILL 30
MAX DRILLING DIAMETER 30 mm
SPINDLE SPEED 100-2400 rpm
TABLE SIZE 330x340 mm
OVERALL DIMENSIONS 500x900x1800 mm
USED MACHINE
.JPG)
MOTOR BRUSHING MACHINE
KARCHER
09053
KARCHER KSM 750
FOR FLOORS
WITH BATTERIES
12V / 450W motor
Main brush 55 cm
Rotating side brush 16 cm
Efficiency in swept area 2800 m2/hour
USED
09053
KARCHER KSM 750
FOR FLOORS
WITH BATTERIES
12V / 450W motor
Main brush 55 cm
Rotating side brush 16 cm
Efficiency in swept area 2800 m2/hour
USED
ANGLE PLATE MM 700x600H
08207
Dimensions mm 700x600H
Base dimensions mm 700x200
USED EQUIPMENT
Dimensions mm 700x600H
Base dimensions mm 700x200
USED EQUIPMENT
CUBE 630x630
09860
cube base mm 630x630
Clamping dimensions mm 400x400x600
USED EQUIPMENT
cube base mm 630x630
Clamping dimensions mm 400x400x600
USED EQUIPMENT
CHUCK 3 JAW MM 200
09315
3 jaws
double guide 3+3+3
Diameter mm 200
with plate CAMLOCK 8''
USED MATERIAL
3 jaws
double guide 3+3+3
Diameter mm 200
with plate CAMLOCK 8''
USED MATERIAL
ROUND AND COATING PUNCHES
07653
Round punches diameter:
-6 mm
-7 mm
-10 mm
-11 mm
-12 mm
-15 mm
-17 mm
-19 mm
COATING PUNCHES DIMENSIONS
7x15 mm
8x15 mm
0x15 mm
9x20 mm
11x30...
Round punches diameter:
-6 mm
-7 mm
-10 mm
-11 mm
-12 mm
-15 mm
-17 mm
-19 mm
COATING PUNCHES DIMENSIONS
7x15 mm
8x15 mm
0x15 mm
9x20 mm
11x30...
SHARPENING ACETI MOD. 105
ACETI
09555
Grinding wheel dimensions 200x20x25 mm thickness
Max grinding wheel speed m/s 30
Engine rpm 1400:2800
Power kW 1.1
Weight 110 kg
Overall dimensions...
09555
Grinding wheel dimensions 200x20x25 mm thickness
Max grinding wheel speed m/s 30
Engine rpm 1400:2800
Power kW 1.1
Weight 110 kg
Overall dimensions...
DRILL GRINDING MACHINES NIK DRILLING
NIK DRILLY
09290
MOD. SA 1302
PORTABLE DRILL GRINDING MACHINES WITH 2 WHEELS FOR TWIST DRILLS IN SUPER HIGH SPEED STEEL AND IN HARD METAL, WITH GRINDING DRILL...
09290
MOD. SA 1302
PORTABLE DRILL GRINDING MACHINES WITH 2 WHEELS FOR TWIST DRILLS IN SUPER HIGH SPEED STEEL AND IN HARD METAL, WITH GRINDING DRILL...
SAW CYRCULAR THOMAS 315
THOMAS
07162
Disc size 315 mm
Cutting capacity 90 degree
Round 95 mm
Square 80 mm
Rectangle 100x70 mm
Motor power 1,3-1,9 Kw
Weight 135 Kg
USED MACHINE
07162
Disc size 315 mm
Cutting capacity 90 degree
Round 95 mm
Square 80 mm
Rectangle 100x70 mm
Motor power 1,3-1,9 Kw
Weight 135 Kg
USED MACHINE
.jpeg)
TAPPING ROSA 12/14M
ROSA
New04257
DRILLING CAPACITY:
-MAX HOLE DIAM IN STEEL RES. 60/70 KG. MM.10
-MAX HOLE DIAM IN CAST IRON OF MEDIUM HARDNESS MM.15
-CONE MORSE 1
-HOLE DEEP...
New04257
DRILLING CAPACITY:
-MAX HOLE DIAM IN STEEL RES. 60/70 KG. MM.10
-MAX HOLE DIAM IN CAST IRON OF MEDIUM HARDNESS MM.15
-CONE MORSE 1
-HOLE DEEP...
CHAMFERING MACHINE SCU
08762
Speed rpm 2800
Power HP 0,50
Wheel dimensions mm 150x16x20
USED MACHINE
Speed rpm 2800
Power HP 0,50
Wheel dimensions mm 150x16x20
USED MACHINE
BENCH DRILLING LTF TB-16
LTF
09842
Max drilling capacity diameter mm 16
Spindle taper CM2
Quill stroke mm 80
Spindle speed rpm 190-2800
Column diameter mm 80
Worktable dimensions mm...
09842
Max drilling capacity diameter mm 16
Spindle taper CM2
Quill stroke mm 80
Spindle speed rpm 190-2800
Column diameter mm 80
Worktable dimensions mm...
COMPRESSOR PISTON INGERSOLL
SANDING MACHINE EURO FINTEC 120
EURO FINTEC
09401
EVER GRIND
Abrasive belt size MM 2000X120
Cutting speed m/sec 32
Machine dimension mm 1050x500x1050
USED MACHINE
09401
EVER GRIND
Abrasive belt size MM 2000X120
Cutting speed m/sec 32
Machine dimension mm 1050x500x1050
USED MACHINE
CHUCK 4 JAWS DIAM 250
08292
Diameter mm 250
EQUIPPED WITH:
Backplate cam-lock 6''
USED EQUIPMENT
Diameter mm 250
EQUIPPED WITH:
Backplate cam-lock 6''
USED EQUIPMENT
FURNACE ARNO LINDEINER
PRESETTER ALPA PS 4000
ALPA
07327
FOR TOOLS
Axis Z vertical stroke mm 400
Axis Y cross stroke mm 200
EQUIPPED WITH:
Optical contour projector
Digital read out
USED MACHINE
07327
FOR TOOLS
Axis Z vertical stroke mm 400
Axis Y cross stroke mm 200
EQUIPPED WITH:
Optical contour projector
Digital read out
USED MACHINE
TIG WELDING MACHINE STEL TIG uP 161h
STEL
08397
ZONE OF CURRENT RANGE 5 - 160 A
POWER SUPPLY 220V - 50Hz
MAX CURRENT FLOW 160 A
USED MACHINE
08397
ZONE OF CURRENT RANGE 5 - 160 A
POWER SUPPLY 220V - 50Hz
MAX CURRENT FLOW 160 A
USED MACHINE
.jpg)
WORKBENCH 2000 + VICE
08870
Wooden top
mm 2000X700X850 H
n.2 drawers
complete with vice
USED MATERIAL
(AVAILABLE N.2 PIECES)
Wooden top
mm 2000X700X850 H
n.2 drawers
complete with vice
USED MATERIAL
(AVAILABLE N.2 PIECES)
CUT-OFF MACHINE OMB MOD. DIAMANTE
OMB
06165
Abrasive disk diam. mm 150
Approx. speed rotation rpm 6000ù
Motor HP 1 / 0.75 kW
USED MACHINE
06165
Abrasive disk diam. mm 150
Approx. speed rotation rpm 6000ù
Motor HP 1 / 0.75 kW
USED MACHINE
.jpg)
CHUCK PINTO DG 200
CNC CATTINI DIVIDING HEAD
CATTINI
09890
TG CNC
Diameter mm 600
Height of center mm 350
with indipentdent 4 JAW Plateau Bison diameter 500
Counterhead
Height of center mm 350
with...
09890
TG CNC
Diameter mm 600
Height of center mm 350
with indipentdent 4 JAW Plateau Bison diameter 500
Counterhead
Height of center mm 350
with...
LATHE CMT URSUS 250x1500
CMT URSUS
06470
CNC
Height of center mm 250
Distance between center mm 1500
EQUIPPED WITH:
-N.02 turret
USED MACHINE
06470
CNC
Height of center mm 250
Distance between center mm 1500
EQUIPPED WITH:
-N.02 turret
USED MACHINE
BORING PAMA SPEEDRAM 1000
PAMA
09195
FLOOR TYPE
HYDROSTATIC
CNC SIEMENS 840D
LONGITUDINAL AXIS - BASEMENT/CARRIAGE (X AXIS):
Stroke 9000 mm
Rapid feed mm/min. 30,000
VERTICAL AXIS -...
09195
FLOOR TYPE
HYDROSTATIC
CNC SIEMENS 840D
LONGITUDINAL AXIS - BASEMENT/CARRIAGE (X AXIS):
Stroke 9000 mm
Rapid feed mm/min. 30,000
VERTICAL AXIS -...
BORING FRORIEP M.M. 160
FRORIEP
06524
Spindle diameter mm 160
Column longitudinal travel X axis mm 16.000
Vertical headstock travel Y axis mm 4000/ 4200
Spindle travel axis Z mm...
06524
Spindle diameter mm 160
Column longitudinal travel X axis mm 16.000
Vertical headstock travel Y axis mm 4000/ 4200
Spindle travel axis Z mm...
.JPG)
EXTERNAL GRINDER GIORIA R150 8000 CNC
GIORIA
07436
CNC Siemen Sinumerik 820G
Max swing diameter mm 900
Max grinding diameter mm 900
Max grinding length 8000 mm
Max weight admitted between centers Kg...
07436
CNC Siemen Sinumerik 820G
Max swing diameter mm 900
Max grinding diameter mm 900
Max grinding length 8000 mm
Max weight admitted between centers Kg...
.jpg)
LATHE DOOSAN PUMA VTR1620M
DOOSAN
09333
CNC FANUC i PLUS
CAPACITY:
Swing over bed mm 2100
Max turning diameter mm 2000
Max turning height mm 1800
Max allowable worpiece weight Kg...
09333
CNC FANUC i PLUS
CAPACITY:
Swing over bed mm 2100
Max turning diameter mm 2000
Max turning height mm 1800
Max allowable worpiece weight Kg...
VERTICAL LATHE TOS HULIN
TOS HULIN
08618
POWERTURN 1600
CNC SIEMENS 840D
Turning diameter mm 2000
Max piece diameter mm 2000
Max turning height mm 1150
Max pallet load Kg 5000
RAM stroke mm...
08618
POWERTURN 1600
CNC SIEMENS 840D
Turning diameter mm 2000
Max piece diameter mm 2000
Max turning height mm 1150
Max pallet load Kg 5000
RAM stroke mm...
CNC LATHE FAT TUR 3 MN x 4000
FAT
08923
3 guide
Distance Between center mm 4000
Diameter on th bed mm 1300
Diameter on carriage mm 1000
Max. Weight Between center (Without steady) kg...
08923
3 guide
Distance Between center mm 4000
Diameter on th bed mm 1300
Diameter on carriage mm 1000
Max. Weight Between center (Without steady) kg...
BORING "T" TYPE TOS VARNSDORF
TOS
06972
MOD. WHQ 13 CNC
CNC HEIDENHAIN iTNC 530
STROKE:
-Axis X 3500 mm
-Axis Y 2500 mm
-Axis Z 1250 mm
-Axis W 800 mm
TABLE:
-Rotary table dimensions mm...
06972
MOD. WHQ 13 CNC
CNC HEIDENHAIN iTNC 530
STROKE:
-Axis X 3500 mm
-Axis Y 2500 mm
-Axis Z 1250 mm
-Axis W 800 mm
TABLE:
-Rotary table dimensions mm...
CENTER ZPS MOD. MCG 1000 5XT
ZPS
09286
5 AXIS
CNC Heidenhain TNC 640
Clamping area of table 1000 mm
Max weight of workpiece 1300 kg
Travel X-axis 1200 mm
Travel Y-axis 1000 mm
Travel...
09286
5 AXIS
CNC Heidenhain TNC 640
Clamping area of table 1000 mm
Max weight of workpiece 1300 kg
Travel X-axis 1200 mm
Travel Y-axis 1000 mm
Travel...
LATHE KRAMATORSK 850x16.000
KRAMATORSK
07291
MOD. 1A665 4 guide
Height of center mm 850
Distance between center mm 16000
Max diameter on bed mm 1600
Max diameter over carriage mm 1250
Bed width...
07291
MOD. 1A665 4 guide
Height of center mm 850
Distance between center mm 16000
Max diameter on bed mm 1600
Max diameter over carriage mm 1250
Bed width...
MILLING FPT MOD. SIRIO-M
FPT
09173
MOBILE MAST
CNC HEIDENHAIN TNC 426M
Machine built entirely in cast iron with hydrostatic sliding guides
Longitudinal stroke X axis 10.000 mm
Vertical...
09173
MOBILE MAST
CNC HEIDENHAIN TNC 426M
Machine built entirely in cast iron with hydrostatic sliding guides
Longitudinal stroke X axis 10.000 mm
Vertical...
VERTICAL LATHE 2700 CNC -TFM
CNC-TFM
06207
MACHINE DESCRIPTION
Vertical lathe double column CNC with accurate positioning system and table clamping which enable, besides traditional turning...
06207
MACHINE DESCRIPTION
Vertical lathe double column CNC with accurate positioning system and table clamping which enable, besides traditional turning...
MILLING TOS KURIM FSQ 100 O/A2
TOS
07297
CNC HEIDENHAIN TNC 426 C
TECHNICAL DETAILS:
- Table size 2.000 x 1.000 mm
- Axis X 2.000 mm
- Axis Y 1.000 mm
- Axis Z 1.400 mm
- Head type “O”...
07297
CNC HEIDENHAIN TNC 426 C
TECHNICAL DETAILS:
- Table size 2.000 x 1.000 mm
- Axis X 2.000 mm
- Axis Y 1.000 mm
- Axis Z 1.400 mm
- Head type “O”...
BENDING ROLL FACCIN MOD. HAV3172
06100
HYDRAULIC 3 ROLLS
ROLLS SIZE:
Upper roll diameter mm 720
Side roll diameter mm 650
CAPACITIES:
Bending capacity (all table) mm 100
Pre-bending...
HYDRAULIC 3 ROLLS
ROLLS SIZE:
Upper roll diameter mm 720
Side roll diameter mm 650
CAPACITIES:
Bending capacity (all table) mm 100
Pre-bending...
MILLING DEBER MOD. M4M/8
DEBER
06431
TRAVEL COLUMN
CNC SELCA 4045
STROKES AND FEEDS:
-Axis X mm 8000
-Axis Y mm 1000
-Axis Z mm 2500
-Rotary moving table mm 2200x2500
Load 40 ton.
V axis...
06431
TRAVEL COLUMN
CNC SELCA 4045
STROKES AND FEEDS:
-Axis X mm 8000
-Axis Y mm 1000
-Axis Z mm 2500
-Rotary moving table mm 2200x2500
Load 40 ton.
V axis...
.JPG)
MILLING/BORING ZAYER MOD. KCU 8000x2500
ZAYER
07740
CNC HEIDENHAIN 407
Axis X stroke mm 8025
Axis Y stroke mm 1263
Axis Z stroke (vertical) mm 2502
Axia V stroke table mm 1200
Tool taper ISO 50
Spindle...
07740
CNC HEIDENHAIN 407
Axis X stroke mm 8025
Axis Y stroke mm 1263
Axis Z stroke (vertical) mm 2502
Axia V stroke table mm 1200
Tool taper ISO 50
Spindle...
MILLING BED TYPE KIHEUNG RT 1000
KIHEUNG
08139
Control Heidenhain iTNC 530
TABLE:
-Rotary table mm 1600x1400
-T-slots (numberxwidth) Noxmm 11x22H7
-Distance between T-slots mm 125
-Max laod Kg...
08139
Control Heidenhain iTNC 530
TABLE:
-Rotary table mm 1600x1400
-T-slots (numberxwidth) Noxmm 11x22H7
-Distance between T-slots mm 125
-Max laod Kg...
LATHE YOUJI VTL 1200 ATC+C
YOUJI
06710
AXIS C
CNC FANUC 18 i TB
WORKING AREA:
-Table diameter mm 1200
-Max swing diameter mm 1600
-Max turning diameter mm 1400
-Max turning height mm...
06710
AXIS C
CNC FANUC 18 i TB
WORKING AREA:
-Table diameter mm 1200
-Max swing diameter mm 1600
-Max turning diameter mm 1400
-Max turning height mm...
.JPG)
LASER TRUMPF TRUMATIC L 4050
TRUMPF
08167
Laser power 6000 W CO/2
Working size mm 4000 x 2000
Laser unit: laser CO2 TLF 6000
EQUIPED WITH:
-LIFT MASTER
USED MACHINE
08167
Laser power 6000 W CO/2
Working size mm 4000 x 2000
Laser unit: laser CO2 TLF 6000
EQUIPED WITH:
-LIFT MASTER
USED MACHINE
Eumach UMC 1000 Machine center
EUMACH
09167
CNC control Heidenhain iTNC 530
5-axis simultaneous interpolation
X travel 1000 mm
Y travel 800 mm
Z travel 700 mm
Rotary table 1000 x 800 mm
Max...
09167
CNC control Heidenhain iTNC 530
5-axis simultaneous interpolation
X travel 1000 mm
Y travel 800 mm
Z travel 700 mm
Rotary table 1000 x 800 mm
Max...
MILLING "T" TYPE STS ADVANTGARDE HS
STS ADVANTGARDE
07111
CNC Heidenhain 530 + volantino remotato
TRAVEL:
Axis X mm 3000
Axis Y mm 2000 (cross column)
Axis Z mm 2000 (vertical)
Rapid axis X, Y e Z 40...
07111
CNC Heidenhain 530 + volantino remotato
TRAVEL:
Axis X mm 3000
Axis Y mm 2000 (cross column)
Axis Z mm 2000 (vertical)
Rapid axis X, Y e Z 40...
BORING TOS MOD. WHN-Q 13.8
TOS
07454
CNC Heidenhain 426 TNC
Axis X stroke mm 3500 (longitudinal)
Axis Y stroke mm 2500 (vertical)
Axis Z stroke mm 1250 (column cross)
Axis W stroke mm...
07454
CNC Heidenhain 426 TNC
Axis X stroke mm 3500 (longitudinal)
Axis Y stroke mm 2500 (vertical)
Axis Z stroke mm 1250 (column cross)
Axis W stroke mm...
.jpeg)
CENTER MORI SEIKI MOD. NH-6300 DG
MORI SEIKI
08864
HORIZONTAL 8 PALLET
STROKES:
Axis X stroke mm 900
Axis Y stroke mm 800
Axis Z stroke mm 980
Distance between table / spindle center line mm...
08864
HORIZONTAL 8 PALLET
STROKES:
Axis X stroke mm 900
Axis Y stroke mm 800
Axis Z stroke mm 980
Distance between table / spindle center line mm...
MILLING NOVAR RUNNER 1200
NOVAR
09310
CNC SELCA 3045 P
TABLE:
Rotary table dimensions mm 1000x1200
T-slots n.7
T-slots width mm 18
T-slots distance mm 120
Load Kg 3500
AXIS:
Axis X stroke...
09310
CNC SELCA 3045 P
TABLE:
Rotary table dimensions mm 1000x1200
T-slots n.7
T-slots width mm 18
T-slots distance mm 120
Load Kg 3500
AXIS:
Axis X stroke...
MILLING SORALUCE SLP-8000
SORALUCE
08612
CNC HEIDENHAIN H426
TABLE:
Table dimensions mm 8000x1350
Table height (from floor) mm 950
T-slot n.9
Distance between T-slots mm 150
T-slots width mm...
08612
CNC HEIDENHAIN H426
TABLE:
Table dimensions mm 8000x1350
Table height (from floor) mm 950
T-slot n.9
Distance between T-slots mm 150
T-slots width mm...